설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제19권8호
  • /
  • Pages.569-576
  • /
  • 2007
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지

제습제와 채널이 제습로터 성능에 미치는 영향

Effect of Desiccant and Channel Geometries on the Performance of Desiccant Rotor

  • 발행 : 2007.08.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The desiccant rotor is the most essential component of desiccant cooling system, but one of its drawbacks to spread out is rotor size. To reduce the size of rotor the analysis of rotor performance is crucial. Systematic examination on the effect of desiccant and channel geometries has been conducted based on the numerical program previously developed. Considered parameters related to channel geometries are channel shape and cross section area of channel, and parameters related to desiccant are mass fraction, heat capacity, density, maximum water uptake and separation factor of isotherm. Considerable reduction of rotor size is expected by adjusting the parameters.

키워드

참고문헌

  1. Daou, K. Wang, R. Z. and Xia, Z. Z., 2006, Desiccant cooling air conditioning: A review, Renewable and Sustainable Energy Reviews, Vol.10, pp. 55-77 https://doi.org/10.1016/j.rser.2004.09.010
  2. Jain, S. and Dhar, P. L., 1995, Evaluation of solid desiccant-based evaporative cooling cycles for typical hot and humid climates, Int. J. Refrig., Vol.18, pp. 287-296 https://doi.org/10.1016/0140-7007(95)00016-5
  3. Halliday, S. P., Beggs, C. B. and Sleigh, P. A, 2002, The use of solar desiccant cooling in the UK: a feasibility study, Appl. Thermal Engng., Vol. 22, pp. 1327-1338 https://doi.org/10.1016/S1359-4311(02)00052-2
  4. Dai, Y.J., Wang, R. Z., Zhang, H. F. and Yu, J. D., 2001, Use of desiccant cooling to improve the performance of vapour compression air conditioning, Appl. Thermal. Engng., Vol. 21, pp. 1185-1205 https://doi.org/10.1016/S1359-4311(01)00002-3
  5. Mazzei, P., Minichiello, F. and Palma, D., 2002, Desiccant HVAC systems for commercial buildings, Appl. Thermal Engng., Vol. 22, pp. 545-560 https://doi.org/10.1016/S1359-4311(01)00096-5
  6. Henning, H.-M., Erpenbeck, T., Hindenburg, C. and Santamaria, I. S., 2001, The potential of solar energy use in desiccant cycles, Int.J. Refrig., Vol. 24, pp. 220-209 https://doi.org/10.1016/S0140-7007(00)00024-4
  7. Aristov, Yu.I., Tokarev, M. M., Gordeeva, L.G., Snytnikov, V. N. and Parmon, V. N., 1999, New composite sorbents for solar driven technology of fresh water production from atmosphere, Solar Energy, Vol. 66, pp. 165-168 https://doi.org/10.1016/S0038-092X(98)00110-8
  8. Liu, Y. F. and Wang, R. Z., 2003, Pore structure of new composite $SiO_{2}$ . $xH_{2}O$ .$yCaCl_{2}$ with uptake of water air, Sci. China, Vol. 46, pp. 551-559 https://doi.org/10.1360/02ye0480
  9. Zheng, W. and Worek, W. M., 1993, Numerical simulation of combined heat and mass transfer processes in a rotary dehumidifier, Numerical Heat Transfer, A23, pp. 211-232
  10. Dai, Y.J., Wang, R. Z. and Zhang, H. F., 2001, Parameter analysis to improve rotary desiccant dehumidification using a mathematical model, Int. J. Therm. Sci., Vol. 40, pp. 400-408 https://doi.org/10.1016/S1290-0729(01)01224-8
  11. Sphaier, L. A and Worek, W. M., 2004, Analysis of heat and mass transfer in porous sorbents used in rotary regenerators, Int. J. Heat Mass Transfer, Vol. 47, pp. 3415- 3430 https://doi.org/10.1016/j.ijheatmasstransfer.2004.01.016
  12. Chung, J. D., Lee, D.-Y. and Yoon, S. M., 2007, Optimization of the area ratio of regeneration to dehumidification and rotor speed on the condition of low regeneration temperature, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 19, pp. 521-528
  13. Gao, Z., Mei, V. C. and Tomlinson, J.J., 2005, Theoretical analysis of dehumidification process in a desiccant wheel, Heat Mass Transfer, Vol. 41, pp. 1033-1042 https://doi.org/10.1007/s00231-005-0663-4
  14. Zhang, L. Z. and Niu, J. L., 2001, A numerical study of laminar forced convection in sinusoidal ducts with arc lower boundaries under uniform wall temperature, Numerical Heat Transfer A, Vol. 40, pp. 55-72 https://doi.org/10.1080/10407780117998
  15. Handbook of Single-Phase Convective Heat Transfer, John Wiley & Sons, Inc. 1987, Editted by Kakac, S., Shah, R. K. and Aung, W
  16. Faust, S, Guido, F. and Lee, D.-Y., 2007, Desiccant element and manufacturing method of the same, Korea Patent 0704235
  17. Lee, D.-Y., Lee, G. and Kim, M. S., 2007, A proposal for new definition of performance indices of a desiccant rotor, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 19, pp. 537-544
  18. Simonson, C.J. and Besant, R. W., 1999, Energy wheel effectiveness: Part II-Correlations, International Journal of Heat and Mass Transfer, Vol. 42, pp. 2171-2185 https://doi.org/10.1016/S0017-9310(98)00327-5