동적 거동을 이용한 연식주퇴장치의 주퇴력 저감 기법 연구

A Study on the Reduction Technique of Recoil Force for Soft Recoil System using Dynamic Behavior

  • 유삼현 (육군사관학교 무기.기계공학과) ;
  • 이재영 (육군사관학교 무기.기계공학과) ;
  • 이종우 (육군사관학교 무기.기계공학과) ;
  • 조성식 (육군사관학교 무기.기계공학과) ;
  • 김주희 (육군사관학교 무기.기계공학과) ;
  • 김인수 (육군사관학교 무기.기계공학과) ;
  • 임수철 (육군사관학교 무기.기계공학과)
  • 발행 : 2007.12.30

초록

The future combat system is likely to be studied and developed in terms of enhancing both firepower and mobility simultaneously. Increased firepower often necessitates a heavier firing system. In return, the body of the vehicle needs to be light-weight in order to improve the mobility of the whole system. For this reason, in the areas of weapons systems such as the tank and self-propelled artillery, a number of studies attempting to develop designs that reduce recoil force against the body of the vehicle are being conducted. The current study proposes a tank construction that has a mass-spring-damper system with two degrees of freedom. A tank structure mounted with a specific soft recoil system that was implemented using a soft recoil technique and another tank structure based on a general recoil technique were compared to each other in order to analyze the recoil forces, the displacements of recoil, and the firing intervals when they were firing. MATLAB-Simulink was used as a simulating tool. In addition, the relationship between the movement of the recoil parts and the positions of the recoil latches in each of the two structures were analyzed. The recoil impact power, recoil displacement, firing interval, and so on were derived as functional formulas based on the position of the recoil latch.

키워드

참고문헌

  1. Yang, G. Spencer Jr, B. F., Carlson, J. D. and Sain, M. K., 'Large-scale MR fluid damper : Modeling and dynamic structure', Engineering Structures, Vol. 24, No. 3, pp. 309-323, 2002 https://doi.org/10.1016/S0141-0296(01)00097-9
  2. Stelzer, G. J., Schulz, M., 'A magnetorheological semi-active isolator to reduce noise and vibration transmissibility in automobiles', J. of Intelligent Material Systems and Structures, Vol. 14, pp. 743-765, 2003 https://doi.org/10.1177/104538903038840
  3. 남윤주 외, '바이패스형 MR 충격 댐퍼의 설계 및 성능 해석', 대한기계학회논문집 제30권 제5 호, pp. 550-559, 2006 https://doi.org/10.3795/KSME-A.2006.30.5.550
  4. 박춘식 외, '고 충격 시스템의 충격력 및 동적 거 동 해석', 한국소음진동공학회 추계학술발표회논 문집, pp. 597-602, 2001
  5. 김상균 외, '주퇴작용식 발사기구의 완충 특성 해 석', 한국소음진동공학회 춘계학술발표회논문집, pp. 104-108, 2002
  6. 이희각 외, 신편병기공학, 청문각, 1994