소나무로 제조된 우드세라믹의 표면온도변화 - 승온속도 및 최고온도에서 유지시간의 영향 -

A Changes in Surface Temperature of Woodceramics Made from Pinus densiflora S. et. Z. - Effect of Heating Rate and Keeping Time at Maximum Temperature -

  • 오승원 (전북대학교 농업생명과학대학, 농업과학기술연구소)
  • Oh, Seung Won (College of Agriculture and Life Science, Institute of Agriculture Science & Technology Chonbuk National University)
  • 투고 : 2007.03.07
  • 심사 : 2007.04.10
  • 발행 : 2007.05.25

초록

소나무 간벌재로 톱밥보드를 만든 후 우드세라믹을 제조하여 승온속도 및 최고온도에서의 유지시간에 따른 우드세라믹의 표면온도의 변화를 조사하였다. 승온속도 $2^{\circ}C/min$와 유지시간 1시간의 조건으로 제조된 우드세라믹의 표면 온도가 가장 높았다. 히터의 표면 온도보다 우드세라믹의 표면온도의 하강 속도가 느려 우드세라믹이 오랜 시간 열을 유지하고 있음을 알 수 있었다.

Using woodceramics made from sawdust board of pine thinning logs, changes in surface temperature were investigated, by the heating rate and keeping time at maximum temperature. The heating rate of $2^{\circ}C/min$ and keeping time at maximum temperature 1 hour, were the highest in surface temperature. Also, it was found that woodcermics maintained heat for a long time because the descending velocity of their surface temperature was slower than that of the heater.

키워드

참고문헌

  1. Hirose, T., T. X. Fan, T. Okabe, and M. Yoshmura. 2001. Effect of carbonization temperature on the basic properties of woodceramics impregnated with liquefied wood. Journal of Materials Science 36: 4145-4149 https://doi.org/10.1023/A:1017952502431
  2. Hokkirigawa, K., T. Okabe, and K. Saito. 1995. Development of porous carbon material 'woodceramics'-Fundamental wear properties under unlubricated condition on air, under base-oil impregnated condition and in water.- Journal of The Society of Materials Science Japan 44(501): 800-804 https://doi.org/10.2472/jsms.44.800
  3. Hokkirigawa, K., T. Okabe, and K. Saito. 1996. Wear properties of new porous carbon materials: woodceramics. Journal of Porous Materials 2: 229-235 https://doi.org/10.1007/BF00488113
  4. Kano, M., M. Momota, T. Okabe, and K. Saito. 1997. Specific heat capacity of new porous carbon materials: woodceramics. Thermochimica Acta 292: 175-177 https://doi.org/10.1016/S0040-6031(96)03110-3
  5. Nonaka, K., M. Fushitani, T. Hirose, and T. Okabe. 1999. Thermal conductivity of woodceramics. Proceeding of 11th MRS-J annual meeting. session 1. New plant materials. pp. 98-101
  6. Oh, S. W. 2001. Properties of woodceramics made from thinned logs of Cryptomeria japonica D. Don -Effect of steam injection and its time-, Journal of the Korean Wood Science and Technology 29(2): 69-75
  7. Oh, S. W., and H. S. Byeon. 2003. Change of Surface temperature in woodceramics made from MDF(II) -Effect of impregnation rate and burning temperature-. Journal of the Korean Wood Science and Technology 31(1): 41-45
  8. Oh, S. W., and H S. Byeon. 2006. Far-infrared ray emission and electrical properties of wood-ceramics manufactured with thinned logs. Forest Products Journal 56(7/S): 29-32
  9. Oh, S. W., and T. Okabe. 2001. Properties of woodceramics chip tile made from waste wood (II) -Effect of additions and woodceramics chip-. Journal of the Korean Wood Science and Technology 29(3): 68-72
  10. Oh, S. W., T. Okabe, and T. Hirose. 2000. Electrical properties of woodceramics made from thinned logs of Cryptomeria japonica D. Don. Journal of the Korean Society of Furniture Technology 11(1): 31-36
  11. Okabe. 1996. Porous carbon materials 'woodceramics'. Uchida Rokakuho Publishing Co., Ltd. pp. 112-115
  12. Okabe, T. and K. Saito. 1995a. Development of woodceramics. Transactions of the Material Research Society of Japan 18: 681-684
  13. Okabe, T. and K. Saito. 1995b. The examination of the manufacturing method of woodceramics (I) -Structural changes affected by burning temperature -. International Ecomaterial Conference, Xian, China pp. 1-4
  14. Okabe, T., K Saito, H. Togawa, and Y. Kumagai. 1995a. Electromagnetic shielding characteristic of porous carbon material 'woodceramics'. International Ecomaterial Conference, Xian, China pp. 9-12
  15. Okabe, T., K. Saito, H. Togawa, and Y. Kumagai. 1995b. Development of porous carbon material 'woodceramics'-Electromagnetic shielding characteristics-. Journal of The Society of Materials Science Japan 44(498): 288-291 https://doi.org/10.2472/jsms.44.288
  16. Okabe, T., K. Saito, and K. Hokkirigawa. 1996. The effect of burning temperature on the structural changes of woodceramics. Journal of Porous Materials 2: 215-221 https://doi.org/10.1007/BF00488111
  17. Suda, T., N. Kondo. T. Okabe, and K. Saito. 1999. Electrical properties of woodceramics. Journal of Porous Materials 6: 255-258 https://doi.org/10.1023/A:1009644316468
  18. Zhao, B. Y., T. Hirose, T. Okabe, D. Zhang, T. X. Fan, and K. A. Hu. 2002. woodceramics prepared from wood powder/phenolated wood composite. Journal of Porous Materials 9: 195-201 https://doi.org/10.1023/A:1020986801521
  19. 오승원, 변희섭. 2005. 승온속도 및 최고온도 유지시간이 간벌재로 제조된 우드세라믹의 성질에 미치는 영향. 목재공학 33(3): 38-44
  20. 廣瀨 孝. 1997. ウツドセラミクスの强度性能向上に關する研究. 東京農工大學院 修士論文