DOI QR코드

DOI QR Code

실험계획법을 이용한 세탁기 플랜지 단면 최적설계

Optimum Design of Washing Machine Flange using Design of Experiment

  • 이인수 (부산대학교 대학원 정밀기계공학과) ;
  • 김병민 (부산대학교 기계공학부) ;
  • 김의수 (국립과학수사연구소)
  • 발행 : 2007.05.01

초록

To meet demand of big capacity and high speed rotation for washing machine, more stress from bending and twisting are complexly loaded onto the shaft supporting the horizontal drum, causing problems in fracture strength and fatigue life. Shafting system is mainly divided into flange and shaft. Flange is located between the drum and shaft, transferring power from the shaft to drum, and acting as a supporter of the back of the drum. Because section of flange has various design factors according to configuration of flange, the optimum conditions can’t be easily determined. Using a design of experiment (DOE), this study was performed investigating the interaction effect between factors as well as the main effect of the each design factor under bending and twist and proposed optimum condition using center composition method among response surface derived from regression equation of simulation-based DOE.

키워드

참고문헌

  1. Kim, N. H., Choi, M. H., Kim, S. Y. and Chang, E. G., 2006, 'Design of Experiment Method Considering Interaction Effect of Process Parameters for Optimization of Copper Chemical Mechanical Polishing Process,' Microelectronic Engineering, Vol. 83, pp. 506-512 https://doi.org/10.1016/j.mee.2005.11.016
  2. Song, C. S., Kim, J. H., Kim, J. H., 2003, 'Selection of Optimum Machining Condition of Dry Turning Using Taguchi Method,' Autumn conference of KSMTE, pp. 19-24
  3. Kim, J. S., Park, C. J., Park, T. W., 1996, 'Suspension Parameter Design Using a Design of Experiments,' KSAE, Vol. 4, No. 1, pp. 16-27
  4. Lee, S. G., Won, S. H., Lee, H. W., Lee, J., 2005, 'Optimal Design of High Precision Maglev System using Finite Element Method and Design Of Experiments,' Summer conference of KIEE
  5. Onwubiko, C., 2000, Introduction to Engineering Design Optimization, Prentice Hall
  6. Marek, R., Micha, Y., 1988, 'Optimal Design of a Thin-Walled Cross-Section Subject to Bending with Torsion Against Creep Rupture,' International Journal of Mechanical Sciences, Vol. 30, No. 2, pp. 127-136 https://doi.org/10.1016/0020-7403(88)90066-5
  7. Jeong, S. M., 1996, The Latest Design of Machine, DONGMYEONG INC, pp. 248-250
  8. Lee, S. B., 2005, Design of Experiment on the Center of Example, ERETEC INC, pp. 13-14, pp. 185
  9. Lim, J. S., Yim, H. J., Lee, S. B., Heo, S. J., 2002, 'Reliability Based Design Optimization for Section Shape of Simple Structures,' Spring conference of KSNVE, pp. 672-676

피인용 문헌

  1. Cabinet Design for Vibration Reduction of a Drum Type Washing Machine vol.33, pp.9, 2016, https://doi.org/10.7736/KSPE.2016.33.9.731