참고문헌
- Yoo, Y. E., Seo, Y. H., Je, T. J. and Choi, D. S., 2005, 'Injection Molding Technology for Micro/Nano Pattern,' J Kor. Soc. Precision Engng., Vol. 22, pp. 23-29
- Yu, L., Koh, C. G., Lee, L. J. and Koelling, K. W,. 2002, 'Experimental Investigation and Numerical Simulation of Injection Molding with Micro-Features,' Polym. Eng. Sci., Vol. 42, pp. 871-888 https://doi.org/10.1002/pen.10998
- Kim, B. H. and Sub, N. P., 1986, 'Low Thermal Inertia Molding,' Polym. Plast. Technol. Eng., Vol. 25, pp. 73-93 https://doi.org/10.1080/03602558608070076
- Jansen, K. M. B. and Flaman, A. A. M., 1994, 'Construction of Fast-Response Heating Elements for Injection Molding Applications, Polym. Eng. Sci., Vol. 34, pp. 894-897 https://doi.org/10.1002/pen.760341105
- Yao, D. and Kim, B., 2002, 'Development of Rapid Heating and Cooling Systems for Injection Molding Applications, Polym. Eng. Sci., Vol. 42, pp. 2471-2481 https://doi.org/10.1002/pen.11133
- Yao, D. and Kim, B., 2002, 'Injection Molding High Aspect Ratio Microfeature,' J Injection Molding Tech., Vol. 6, pp. 11-17
- Park, K. and Kim, B., 2006, 'A Study on Improvement of Flow Characteristics for Thin-Wall Injection Molding by Rapid Mold Heating,' Trans. of Mat. Proces., Vol. 15, pp. 15-20 https://doi.org/10.5228/KSPP.2006.15.1.015
- Chiang., H. H. Hieber, C. A. and Wang, K. K., 1991, 'A Unified Simulation of the Filling and Post Filling Stages in Injection Molding,' Part I: Formulation, Polym. Eng. Sci., Vol. 31, pp. 116-124 https://doi.org/10.1002/pen.760310210
- Park, K. Ahn, J. H. and Choi, S. R., 2002, 'Application of Design of Experiments and Numerical Analysis to Optimal Design for Injection Molding Processes of Electrical Parts,' Trans. of the KSME(A), Vol. 26, No. 7, pp. 1348-1356
피인용 문헌
- The Improvement of Weldline and Flow mark Defection by using Injection Molding Analysis vol.30, pp.12, 2013, https://doi.org/10.7736/KSPE.2013.30.12.1295
- Experimental Study of Pattern Emboss Forming using an Electromagnetic Force vol.23, pp.6, 2014, https://doi.org/10.5228/KSTP.2014.23.6.363