한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제24권5호
  • /
  • Pages.56-61
  • /
  • 2007
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

기준 슬립 발생기 및 적응 슬라이딩 모드 기법을 이용한 철도차량 제동력 제어

Adhesive Force Control of Railway Rolling Stock Using Reference Slip Generator and Adaptive Sliding-mode Technique

  • 임태형 (울산대학교 기계자동차 대학원) ;
  • 김승수 (울산대학교 산학협력단) ;
  • 최정주 (울산대학교 산학협력단) ;
  • 이병룡 (울산대학교 기계자동차공학부) ;
  • 양순용 (울산대학교 기계자동차공학부) ;
  • 발행 : 2007.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In the braking of railway rolling stock, the slip that is the relative velocity between train body and its wheel affects the adhesive force which is connected to the braking force. The coefficient of the adhesive force changes in accordance with the slip and the condition of a rail road. Namely, its value increases upon the maximum on a rail condition, and there it declines conversely while the magnitude of slip keeps rising on. First, this paper introduced a reference slip generator so that can utilize maximum adhesive forces with a disturbance observer for estimating unmeasurable current adhesive forces which is as an input of the generator. And, an adaptive sliding-mode control system has been synthesized for minimizing the error between reference and current slip. Finally the effectiveness of the proposed control system is evaluated by computer simulation.

키워드

참고문헌

  1. Cheok, A. D. and Shiomi, S., 'A Fuzzy Logic Based Anti-skid Control System for Railway Application,' Knowledge-based Intelligent Electronic System, pp. 195-201, 1998 https://doi.org/10.1109/KES.1998.725846
  2. Ishikawa, Y. and Kawamura, A., 'Maximum Adhesive Force Control in Super High Speed Train,' Power Conversion Conference, Vol. 2, No. 3, pp. 951-954, 1997 https://doi.org/10.1109/PCCON.1997.638382
  3. Takaoka, Y. and Kawamura, A., 'Disturbance Observer Based Adhesion Control for Shinkansen,' Proceedings Advanced Motion Control, 6th International Workshop, pp. 169-174, 2000 https://doi.org/10.1109/AMC.2000.862851
  4. Ohishi, K., Ogawa, Y., Miyashita, I. and Yasukawa, S., 'Anti-slip Re-adhesion Control of Electric Motor Coach Based on Force Controlusing Disturbance Observer,' Industry Applications Conference, Vol. 2, No. 2, pp. 1001-1007, 2000 https://doi.org/10.1109/IAS.2000.881954
  5. Song, J., 'Performance evaluation of a hybrid electric brake system with a sliding mode controller,' Mechatronics, Vol. 12, pp. 339-358, 2005 https://doi.org/10.1016/j.mechatronics.2004.09.005
  6. Malvezzi, M., Toni, P., Allotta, B. and Colla, V., 'Train Speed and Position Evaluation using Wheel Velocity Measurement,' IEEE/ASME International Conference on Advanced Intelligent Mechatronics Proceedings, pp. 220-224, 2001 https://doi.org/10.1109/AIM.2001.936457
  7. Kim, G. and Jho, J., 'Anti-Slip Control and Speed Sensor-less Vector Control of the Railway Vehicle,' Journal of the Korean Society for Railway, Vol. 8, No. 3, pp. 216-221, 2005
  8. Kim, G., Lee, H., Ahn, T., Hong, J., Han, S. and Jeon, K., 'Anti-Slip Control by Adhesion Effort Estimation of Railway Vehicle,' Journal of the Korean Society for Railway, Vol. 6, No. 4, pp. 116-123, 2003
  9. Kwon, S., Huh, U., Kim, H. and Kim, J., 'Re-adhesion Control with Estimated Adhesion Force Coefficient for Wheeled Robot using Fuzzy Logic,' The 30th Annual Conference of the IEEE Industrial Electronics Society, pp. 2530-2535, 2004 https://doi.org/10.1109/IECON.2004.1432200