Stress based Fatigue Life Prediction for Ball Bearing

볼 베어링의 응력 기반 접촉피로수명 예측

  • 김태완 (부산대학교 기계기술연구소) ;
  • 조용주 (부산대학교 기계공학부)
  • Published : 2007.05.01

Abstract

The method for fatigue life prediction of ball bearing is proposed applying the algorithm of contact fatigue prediction based on stress analysis. In order to do this, a series of simulation such as initial surface stress analysis, EHL analysis, subsurface stress analysis and fatigue analysis are conducted from the loading at each ball location calculated for a bearing subjected to external bearing load and contact shape function. And uniaxial fatigue tests are performed to obtain fatigue parameter of AISI 52100 steel. It was found that since stress is usually higher at the inner raceway contact than at the outer raceway contact, fatigue failure occurs on the inner raceway first. When the fatigue life calculated in the stress-based method are compared with L50 life of L-P model, Crossland criterion for the radial load increment is similar to L50 life and Dang Van criterion for the axial load increment is similar. In the case of EHL contact, there is no difference of fatigue life between dry contact and EHL contact, when maximum Hertz pressure exceeds 2.5GPa.

Keywords

References

  1. loannides, E., Harris, T. A. and Ragen, M., 'Endurance of Aircraft Gas Turbine Main Shaft Ball Bearings-Analysis Using Improved Fatigue Life Theory: Part l-Application to a Long-Life Bearing,' Journal of Tribology, Vol. 112, No. 3, pp. 304-308, 1990 https://doi.org/10.1115/1.2920257
  2. Tallian, T., 'On competing failure modes in rolling contact,' ASLE Trans., Vol. 4, No. 10, pp. 418-439, 1967
  3. Harris, T. A., 'Rolling Bearing Analysis, 3rd Edition,' Wiley, New York, 1991
  4. Tallian, T. E., 'Simplified Contact Fatigue Life Prediction Model: Part I. Review of Published Models,' Journal of Tribology, Vol. 114, No. 10, pp. 207-213, 1992 https://doi.org/10.1115/1.2920875
  5. Skurka, J., 'Elastohydrodynamic Lubrication of Roller Bearings,' ASME paper 69-LUBS-18, 1969
  6. ISO, 'Explanatory Note on ISO 281/1-1977,' Technical Report 8646, 1985
  7. International Standards Organization, 'Rolling Bearings-Dynamic Load Ratings and Rating Life-Part I: Calculation Method,' International Standard 281/1-1977(E)
  8. ANSI/AFBMA, 'Load Ratings and Fatigue Life of Ball Bearings,' American National Standard 9, 1978
  9. Ioannides, E. and Harris, T. A., 'A New Fatigue Life Model for Rolling Bearings,' Journal of Tribology, Vol. 107, No. 3, pp. 367-378, 1985 https://doi.org/10.1115/1.3261081
  10. Yoon, K. C., 'Design methods of application-based exclusive ball bearings using genetic algorithms,' Hanyang Univ., dissertation, 2000
  11. Harris, T. A. and Barnsby, R. M., 'Life Ratings for Ball and Roller Bearings,' Proc. Instn. Mech. Engr., Vol. 215, No. 6, pp. 577-595, 2001 https://doi.org/10.1243/1350650011543817
  12. Love, A. E. H., 'Stress Produced in a Semi-Infinite Solid by Pressure on Part of the Boundary,' Phil. Trans. Royal Society, Vol. A228, pp.377-420, 1929 https://doi.org/10.1098/rsta.1929.0009
  13. Cho, Y. J., Kim, T. W. and Lee, M. J., 'The Stress Field in a Body Caused by the Tangential Force of a Rectangular Patch on a Semi-infinite Solid,' KSTLE International Journal, Vol. 2, No. 1, pp. 29-34, 2001
  14. Lee, R. T. and Hamrock, B. J., 'Squeeze and Entraining Motion in Nonconformal Line Contacts. Part II- Elastohydrodynamic Lubrication,' Journal of Tribology, Vol. 111, No. 1, pp. 8-16, 1989 https://doi.org/10.1115/1.3261884
  15. Roelands, C. J. A., 'Correlational Aspects of the viscosity-temperature-pressure relationship of lubrication oils,' Druk, V. R. B., Groinen, Netherland, 1966
  16. Dowson, D. and Higginson, G. R., 'Elastohydrodynamic Lubrication,' Pergamon, Oxford, 1966
  17. Koo, Y. P., 'Non-steady 3-dimensional elastohydrodynamic lubrication analysis,' Pusan National Univ., dissertation, 2000
  18. Matake, T., 'An Explanation on Fatigue Limit under Combined Stress,' Bull. of JSME, Vol. 20, pp. 257-263, 1977 https://doi.org/10.1299/jsme1958.20.257
  19. Corssland, B., 'Effect of Large Hydrostatic Pressure on The Torsional Fatigue Strength of An Alloy Steel,' Pro. Int. Conf. on Fatigue of Metals, Institution of Mechanical Engineers, London, pp. 138-149, 1956
  20. DangVan, K., 'High-Cycle Fatigue From Theory to Applications,' Springer Wien, New York, pp. 2-51, 1999
  21. Hamrock, B. J., 'Fundamentals of Fluid Film Lubrication,' McGrawHill, Singapore, pp. 584, 1994
  22. Hearle, A. D. and Johnson, K. L., 'Cumulative Plastic 22. Flow in Rolling and Sliding Line Contact,' Journal of Applied Mechanics, Vol. 54, No. 1, pp. 1-7, 1987 https://doi.org/10.1115/1.3172958