References
- H. Gleiter: Prog. Mater. Sci. 33(1989), 223-315 https://doi.org/10.1016/0079-6425(89)90001-7
- R. Birringer: Mater. Sci. Eng. A 117(1989), 33-43 https://doi.org/10.1016/0921-5093(89)90083-X
- H. Kuhn and D. Medin: ASM Handbook Volume 08: Mechanical Testing and Evaluation, (ASM, Ohio, 2000), 7,
- O. D. Sherby and J. Wadsworth: Prog. Mater. Sci. 33(1989), 169-221 https://doi.org/10.1016/0079-6425(89)90004-2
- F. A. Mohamed, M. M. I. Ahmed and T. G. Langdon: Metall. Trans. A 8(1977), 933-938 https://doi.org/10.1007/BF02661575
- E. Y. Ivanov, C. Suryanarayana and B. D. Bryskin: Mater. Sci. Eng. A 251(1998), 255-261 https://doi.org/10.1016/S0921-5093(98)00620-0
- M. L. Trudeau: Mater. Sci. Eng. A 204(1995), 233-239 https://doi.org/10.1016/0921-5093(95)09967-0
- Y. Iwahashi, M. Furukawa, Z. Horita, M. Nemoto and T. G. Langdon: Metall. Mater. Trans. A 29 (1998), 2245-2252 https://doi.org/10.1007/s11661-998-0102-5
- T. G. Langdon, M. Furukawa, M. Nemoto and Z. Horita: JOM 52(2000), 30-33
- Z. Horita, M. Furukawa, M. Nemoto and T. G. Langdon: The Heat Treatment 41(2001), 68-74
- I. V. Alexandrov, Y. T. Zhu, T. C. Lowe, R. K. Islamgaliev and R. Z. Valiev: Nanostruct. Mater. 10(1998), 45-54 https://doi.org/10.1016/S0965-9773(98)00026-9
- Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai and R.G. Hong: Scr. Mater. 39(1998), 1221-1227 https://doi.org/10.1016/S1359-6462(98)00302-9
- W. M. Thomas, E. D. Nicholas, J. C. Needham,M. G. Murch, P. Templesmith and C. J.Dawes: GB Patent Application No. 9125978.8, Dec. 1991, US Patent No. 5460317, Oct. 1995
- W. M. Thomas and E. D. Nicholas: Materials & Design 18(1997), 269-273 https://doi.org/10.1016/S0261-3069(97)00062-9
- C. J. Dawes and W. M. Thomas: Weld. J. 75 (1996), 41-45
- A. Sanderson, C. S. Punshon and J. D. Russell: Fusion Engineering and Design 49-50(2000), 77-87 https://doi.org/10.1016/S0920-3796(00)00407-5
- C. G. Rhodes, M. W. Mahoney, W. H. Bingel, R. A. Spurling and C. C. Bampton: Scr. Mater. 36 (1997), 69-75 https://doi.org/10.1016/S1359-6462(96)00344-2
- G. Liu, L. E. Murr, C. S. Niou, J. C. McClure and F. R. Vega: Scr. Mater. 37(1997), 355-361 https://doi.org/10.1016/S1359-6462(97)00093-6
- Y. Li, L. E. Murr and J. C. McClure: Mater. Sci. Eng. A 271(1999), 213-223 https://doi.org/10.1016/S0921-5093(99)00204-X
- O. V. Flores, C. Kennedy, L. E. Murr, D. Brown, S. Pappu, B.M. Nowak and J. C. McClure: Scr. Mater. 38(1998), 703-708 https://doi.org/10.1016/S1359-6462(97)00551-4
- L. E. Murr, G. Liu and J. C. McClure: J. Mater. Sci. Lett. 16(1997), 1801-1803 https://doi.org/10.1023/A:1018556332357
- Y. J. Kwon, I. Shigematsu and N. Saito: J. JAPAN Inst. METALS 66(2002), 1325-1332 (in Japanese) https://doi.org/10.2320/jinstmet1952.66.12_1325
- H. Y. Kim, W. H. Sohn and S. H. Hong: Mater. Sci. Eng. A 251(1998), 216-225 https://doi.org/10.1016/S0921-5093(98)00614-5
- T. Furu, H. R. Shercliff, G. J. Baxter and C. M. Sellars: Acta Mater. 47(1999), 2377-2389 https://doi.org/10.1016/S1359-6454(99)00113-5
- S. I. Kim and Y. C. Yoo: Mater. Sci. Eng. A 311(2001), 108-113 https://doi.org/10.1016/S0921-5093(01)00917-0
- S. Benavides, Y. Li, L. E. Murr, D. Brown and J. C. McClure: Scr. Mater. 41(1999), 809-815 https://doi.org/10.1016/S1359-6462(99)00226-2
- Y. J. Kwon, I. Shigematsu and N. Saito: J. JAPAN Inst. METALS 67(2003), 547-554 (in Japanese) https://doi.org/10.2320/jinstmet1952.67.10_547
Cited by
- Optimization of friction stir welding with the various welding parameters for Al-Mg alloys vol.30, pp.S1, 2011, https://doi.org/10.1007/s12598-011-0360-z