유기물자원화 (Journal of the Korea Organic Resources Recycling Association)
- 제15권2호
- /
- Pages.81-88
- /
- 2007
- /
- 1225-6498(pISSN)
- /
- 2508-3015(eISSN)
톱밥을 이용한 중금속 제거에 관한 연구
Heavy Metal Removal using Sawdust
- Jeon, Choong (Department of Environmental & Applied Chemical Engineering, Kangnung National University) ;
- Kim, Jung Hwan (Department of Environmental & Applied Chemical Engineering, Kangnung National University)
- 투고 : 2007.05.15
- 심사 : 2007.06.04
- 발행 : 2007.06.30
초록
톱밥을 이용한 중금속 제거에 관한 연구가 수행되어졌다. 납, 구리, 카드뮴 이온들 중에서 납의 흡착능이 pH 4에서 0.22 mmol/g-dry mass로서 가장 높았다. 톱밥의 표면상태와 납이온의 존재 여부는 FT-IR, SEM(Scanning Electron Microscopy) 그리고, EDX(Energy Dispersive X-ray)에 의해서 확인되어졌다. 초기 납 농도가 100ppm일때 0.5g의 톱밥으로 약 90%의 납 이온을 제거할 수 있었다. Langmuir model 식을 이용하여 납 이온에 대한 등온흡착선을 묘사하였으며 실험결과는 모델식에서 얻어진 결과와 잘 부합되었다. 또한 대부분의 흡착은 60분 내에 이루어졌으며 납 이온 용액의 pH는 5.8에서 4.5로 시간에 따라 감소하였다.
A study on the removal of heavy metals using sawdust was performed. Among heavy metals such as lead, copper and cadmium ions, uptake capacity of lead ions was the highest as about 0.22 mmol/g-dry mass at pH 4. The surface condition and existence of lead ions onto the sawdust was confirmed by the FT-IR, SEM (Scanning Electron Microscopy), and EDX (Energy Dispersive X-ray) instrumental analyses. When 0.5g of sawdust was added to initial lead solution (100ppm) removal efficiency was approximately 90%. Isothermal adsorption curve for lead ions was described by the Langmuir model equation and experimental data well fitted to model equation. Most adsorption for lead ions was also completed within 60min and pH of lead solution from 5.8 to 4.5 decreased with time.