DOI QR코드

DOI QR Code

Computer-aided approach of parameters influencing concrete service life and field validation

  • Papadakis, V.G. (Department of Environmental and Natural Resources Management, University of Ioannina) ;
  • Efstathiou, M.P. (Patras Science Park S.A.) ;
  • Apostolopoulos, C.A. (Department of Mechanical and Aeronautical Engineering, University of Patras)
  • Received : 2006.06.22
  • Accepted : 2007.02.02
  • Published : 2007.02.25

Abstract

Over the past decades, an enormous amount of effort has been expended in laboratory and field studies on concrete durability estimation. The results of this research are still either widely scattered in the journal literature or mentioned briefly in the standard textbooks. Moreover, the theoretical approaches of deterioration mechanisms with a predictive character are limited to some complicated mathematical models not widespread in practice. A significant step forward could be the development of appropriate software for computer-based estimation of concrete service life, including reliable mathematical models and adequate experimental data. In the present work, the basis for the development of a computer estimation of the concrete service life is presented. After the definition of concrete mix design and structure characteristics, as well as the consideration regarding the environmental conditions where the structure will be found, the concrete service life can be reliably predicted using fundamental mathematical models that simulate the deterioration mechanisms. The prediction is focused on the basic deterioration phenomena of reinforced concrete, such as carbonation and chloride penetration, that initiate the reinforcing bars corrosion. Aspects on concrete strength and the production cost are also considered. Field observations and data collection from existing structures are compared with predictions of service life using the above model. A first attempt to develop a database of service lives of different types of reinforced concrete structure exposed to varying environments is finally included.

Keywords

References

  1. Apostolopoulos, C.A., Papadopoulos, M.P. and Pantelakis, S.G. (2006), "Tensile behavior of corroded reinforcing steel bars ASt 500s", Construction and Building Materials, in press.
  2. Basheer, P.A.M., Chidiac, S.E. and Long, A.E. (1996), "Predictive models for deterioration of concrete structures", Construction and Building Materials, 10, 27. https://doi.org/10.1016/0950-0618(95)00092-5
  3. Biondini, F., Bontempi, F., Frangopol, D.M., and Malerba, P.G. (2004), "Cellular automata approach to durability analysis of concrete structures", ASCE J. Struct. Eng., 130(11), 1724-1737. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1724)
  4. Biondini, F., Bontempi, F., Frangopol, D.M., and Malerba, P.G. (2006), "Probabilistic service life assessment and maintenance planning of concrete structures", ASCE J. Struct. Eng., 132(5), 810-825. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:5(810)
  5. European Standard EN 197-1 (2000), Cement - Part 1: Composition, Specifications and Conformity Criteria for Common Cements, CEN, Brussels.
  6. European Standard EN 206-1 (2000), Concrete - Part 1: Specification, Performance, Production and Conformity, CEN, Brussels.
  7. Hewlett, P.C. (2005), "Opportunities for concrete research and researchers", Proceedings of the International Congress on Global Construction: Ultimate Concrete Opportunities. Dundee, U.K., July; Edited by Dhir, R.K., Halliday, J.E. and Csetenyi E.; Thomas Telford, London, 2005, pp. 1-20.
  8. Maekawa, K., Ishida, T. and Kishi, T. (2003), "Multi-scale modeling of concrete performance", J. Advanced Concrete Technology, 1(2), 91-126. https://doi.org/10.3151/jact.1.91
  9. Morinaga, S. (1990), "Prediction of service lives of reinforced concrete buildings based on corrosion rate of reinforcing steel", Proceedings of the 5th International Conference on Durability of Building Materials and Components, Brighton, U.K., November; Edited by Baker, J.M., Nixon, P.J., Majumdar, A.J. and Davies, H.; E. & F.N. SPON, London, 1991. pp. 5-16.
  10. Neville, A.M. (1995), Properties of Concrete, Longman, Essex, U.K.
  11. Papadakis, V.G., Vayenas, C.G. and Fardis M.N. (1991a), "Physical and chemical characteristics affecting the durability of concrete", ACI Mater. J., 88(2), 186-196.
  12. Papadakis, V.G., Vayenas, C.G. and Fardis, M.N. (1991b), "Fundamental modeling and experimental investigation of concrete carbonation", ACI Mater. J., 88(4), 363-373.
  13. Papadakis, V.G., Fardis, M.N. and Vayenas, C.G. (1992), "Effect of composition, environmental factors and cement-lime mortar coating on concrete carbonation", Mater. Struct., 25, 293-304. https://doi.org/10.1007/BF02472670
  14. Papadakis, V.G., Fardis, M.N. and Vayenas, C.G. (1996), "Physicochemical processes and mathematical modeling of concrete chlorination", Chemical Eng. Sci., 51(4), 505-513. https://doi.org/10.1016/0009-2509(95)00318-5
  15. Papadakis, V.G. (1999a), "Experimental investigation and theoretical modeling of silica fume activity in concrete", Cement Concrete. Res., 29(1), 79-86. https://doi.org/10.1016/S0008-8846(98)00171-9
  16. Papadakis, V.G. (1999b), "Effect of fly ash on Portland cement systems. Part I: Low-calcium fly ash", Cement Concrete Res., 29(11), 1727-1736. https://doi.org/10.1016/S0008-8846(99)00153-2
  17. Papadakis V.G. (2000a), "Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress", Cement Concrete Res., 30(2), 291-299. https://doi.org/10.1016/S0008-8846(99)00249-5
  18. Papadakis, V.G. (2000b), "Effect of fly ash on Portland cement systems. Part II: High-calcium fly ash", Cement Concrete Res., 30(10), 1647-1654. https://doi.org/10.1016/S0008-8846(00)00388-4
  19. Papadakis, V.G. and Tsimas, S. (2002), "Supplementary cementing materials in concrete - Part I: Efficiency and design", Cement Concrete Res., 32(10), 1525-1532. https://doi.org/10.1016/S0008-8846(02)00827-X
  20. Papadakis, V.G. and Efstathiou, M.P. (2005), EUCON: A Computer Software for Estimation of Concrete Service Life, Patras Science Park, Patras, Greece.
  21. Parrot, L. (1994), "Design for avoiding damage due to carbonation-induced corrosion", Proceedings of 3rd International Conference on Durability of Concrete, ACI SP-145, Nice, pp 283.
  22. Pereira, C.J. and Hegedus, L.L. (1984), "Diffusion and reaction of chloride ions in porous concrete", Proceedings of the 8th International Symposium of Chemical Reaction Engineering, Edinburgh, Scotland.
  23. Richardson, M.G. (2002), Fundamentals of Durable Reinforced Concrete, Spon Press, London.
  24. Sandberg, P. (1998), "Chloride initiated reinforcement corrosion in marine concrete", Report TVBM-1015, Lund Institute of Technology, Division of Building Materials, Lund, Sweden.
  25. Violetta, B. (2002), "Life-365 service life prediction model", Concrete Int., 24(12), 53-57.

Cited by

  1. A reaction-diffusion modeling of carbonation process in self-compacting concrete vol.15, pp.5, 2015, https://doi.org/10.12989/cac.2015.15.5.847
  2. Consequences of steel corrosion on the ductility properties of reinforcement bar vol.22, pp.12, 2008, https://doi.org/10.1016/j.conbuildmat.2007.10.006
  3. Electrochemical study of inhibitors to improve the anti‐corrosion performance of reinforced bar in the concrete vol.58, pp.1, 2011, https://doi.org/10.1108/00035591111097666
  4. Sustainable concrete mix design for a target strength and service life vol.12, pp.6, 2013, https://doi.org/10.12989/cac.2013.12.6.755
  5. Service life prediction of a reinforced concrete bridge exposed to chloride induced deterioration vol.1, pp.3, 2013, https://doi.org/10.12989/acc2013.1.3.201
  6. Evaluation of chloride-penetration resistance of metakaolin concrete by means of a diffusion – Binding model and of the k-value concept vol.63, 2015, https://doi.org/10.1016/j.cemconcomp.2015.07.012
  7. Predictive modeling of concrete compressive strength based on cement strength class vol.11, pp.6, 2013, https://doi.org/10.12989/cac.2013.11.6.587
  8. Computer-aided modeling of concrete service life vol.47, 2014, https://doi.org/10.1016/j.cemconcomp.2013.11.004
  9. Influence of chloride threshold value in service life prediction of reinforced concrete structures vol.43, pp.7, 2018, https://doi.org/10.1007/s12046-018-0863-5
  10. A fuzzy expert system for diagnosis assessment of reinforced concrete bridge decks vol.6, pp.4, 2007, https://doi.org/10.12989/cac.2009.6.4.281
  11. Probability-based durability design software for concrete structures subjected to chloride exposed environments vol.8, pp.5, 2011, https://doi.org/10.12989/cac.2011.8.5.511
  12. A software-assisted comparative assessment of the effect of cement type on concrete carbonation and chloride ingress vol.10, pp.4, 2007, https://doi.org/10.12989/cac.2012.10.4.391
  13. Nonlinear analysis of service stresses in reinforced concrete sections-closed form solutions vol.10, pp.5, 2007, https://doi.org/10.12989/cac.2012.10.5.541
  14. Prediction of the remaining service life of existing concrete bridges in infrastructural networks based on carbonation and chloride ingress vol.21, pp.3, 2007, https://doi.org/10.12989/sss.2018.21.3.305
  15. Evaluation of carbonation service life of slag blended concrete considering climate changes vol.21, pp.4, 2007, https://doi.org/10.12989/cac.2018.21.4.419
  16. Microstructure modeling of carbonation of metakaolin blended concrete vol.7, pp.3, 2019, https://doi.org/10.12989/acc.2019.7.3.167
  17. CO2 uptake model of limestone-powder-blended concrete due to carbonation vol.38, pp.None, 2007, https://doi.org/10.1016/j.jobe.2021.102176