DOI QR코드

DOI QR Code

Probabilistic assessment on the basis of interval data

  • Thacker, Ben H. (Materials Engineering Department, Southwest Research Institute) ;
  • Huyse, Luc J. (Materials Engineering Department, Southwest Research Institute)
  • 투고 : 2005.01.27
  • 심사 : 2005.07.19
  • 발행 : 2007.02.20

초록

Uncertainties enter a complex analysis from a variety of sources: variability, lack of data, human errors, model simplification and lack of understanding of the underlying physics. However, for many important engineering applications insufficient data are available to justify the choice of a particular probability density function (PDF). Sometimes the only data available are in the form of interval estimates which represent, often conflicting, expert opinion. In this paper we demonstrate that Bayesian estimation techniques can successfully be used in applications where only vague interval measurements are available. The proposed approach is intended to fit within a probabilistic framework, which is established and widely accepted. To circumvent the problem of selecting a specific PDF when only little or vague data are available, a hierarchical model of a continuous family of PDF's is used. The classical Bayesian estimation methods are expanded to make use of imprecise interval data. Each of the expert opinions (interval data) are interpreted as random interval samples of a parent PDF. Consequently, a partial conflict between experts is automatically accounted for through the likelihood function.

키워드

참고문헌

  1. AIAA (1998), Guide for the Verification and Validation of Computational Fluid Dynamics Simulations, American Institute of Aeronautics and Astronautics, AIAA-G-077-1998, Reston, VA
  2. American Institute of Aeronautics and Astronautics (AIAA) Computational Fluid Dynamics Committee on Standards
  3. American Society of Mechanical Engineers, Council on Codes and Standards, Board on Performance Test Codes #60, Committee on Verification and Validation in Computational Solid Mechanics, http://www.asme.org/cns/ departments/performance/ public/ptc60/
  4. Banks, J. (ed.) (1998), Handbook of Simulation. John Wiley & Sons
  5. Box, G. and Tiao, G (1992), Bayesian Inference in Statistical Analysis. John Wiley & Sons
  6. Der Kiureghian, A. (1989), 'Measures of structural safety under imperfect states of knowledge', J Struct. Eng., ASCE, 115(5), 1119-1140 https://doi.org/10.1061/(ASCE)0733-9445(1989)115:5(1119)
  7. Der Kiureghian, A. and Liu, P.-L. (1986), 'Structural reliability under incomplete probability information', J Eng. Mech., ASCE, 112(1), 85-104 https://doi.org/10.1061/(ASCE)0733-9399(1986)112:1(85)
  8. Ditlevsen, O. (1993), 'Distribution arbitrariness in structural reliability', In G. Schueller, M. Shinozuka, and J. Yao (Eds.), Strnctural Safety and Reliability, Innsbruck, 1241-1247. Proc. of ICOSSAR 1993
  9. Gelman, A., Carlin, J., Stem, H. and Rubin, D. (1995), Bayesian Data Analysis. London, UK: Chapman & Hall
  10. Maes, M. and Huyse, L. (1995), 'Tail effects of uncertainty modeling in QRA', In Third Int. Symp. on Uncertainty Modeling and Analysis (ISUMA-95), College Park, MD, 133-138
  11. Meyer, M.A. and Booker, J.M. (2001), Eliciting and Analyzing Expert Judgment: A Practical Guide. Society for Industrial and Applied Mathematics and American Statistical Association
  12. Oberkampf, W.L., Trucano, T.G. and Hirsch, C. (2003), 'Verification, validation and predictive capability in computational engineering and physics', SAND2003-3769, February
  13. Oberkampf, W. and Helton, J. (2002), 'Investigation of evidence theory in engineering applications', AIAAPaper 2002-1569. In 43rd AIAA/ASME/ASCE/AHS/ASC
  14. Oberkampf, W., Helton, J., Joslyn, C., Wojtkiewicz, S. and Ferson, S. (2002), 'Challenge problems: Uncertainty in system response given uncertain parameters', Technical report, Sandia National Laboratories
  15. Oberkampf, W., Helton, J. and Sentz, K. (2001), 'Mathematical representation of uncertainty', AIAA-Paper 2001-1645. In 42nd AIAA/ASME/ASCE/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Seattle, WA. CD-ROM
  16. Pratt, J., Raiffa, H. and Schlaifer, R. (1995), Introduction to Statistical Decision Theory. Cambridge, MA: MIT Press
  17. Sentz, K. and Ferson, S. (2002), 'Combination of evidence in Dempster-Shafer Theory', Technical Report SAND2002-0835, Sandia National Laboratories
  18. Thacker, B.H. and Rodriguez, E.A. (2002), 'Verification and validation plan for dynamic experimentation containment vessels', Los Alamos National Laboratory Draft Report, December
  19. Thacker, B.H. (2003), 'The role of nondeterminism in verification and validation of computational solid mechanics models', Reliability & Robust Design in Automotive Engineering, SAE Int., SP-1736, No. 200301-1353, SAE 2003 World Congress, Detroit, MI, 3-6 March
  20. United States Department of Defense, Defense Modeling and Simulation Office (DM SO), 'Verification, Validation, and Accreditation', https://www.dmso.mil/public/transition/vva/

피인용 문헌

  1. Fault and Event Tree Analyses for Process Systems Risk Analysis: Uncertainty Handling Formulations vol.31, pp.1, 2011, https://doi.org/10.1111/j.1539-6924.2010.01475.x
  2. Reliability sensitivities with fuzzy random uncertainties using genetic algorithm vol.60, pp.3, 2016, https://doi.org/10.12989/sem.2016.60.3.413