Journal of Advanced Marine Engineering and Technology

  • 제31권4호
  • /
  • Pages.433-440
  • /
  • 2007
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

토크분배함수를 이용한 SRM 윈치 시스템의 운전특성 개선

Driving Characteristics Improvement of SRM Winch System using Torque Sharing Function

  • 안영주 (부경대학교 전기제어공학부)
  • 발행 : 2007.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper a new dynamoelectric winch system is introduced which is widely applied in shipping. building, architecture and so on. Generally in the winch system the squirrel cage induction motor is used as prime mover and line voltage is directly applied to the induction motor during operation. So it is difficult to obtain the smoothing revolution. because of variation of the weight of cargo and system operating method. Based on above reasons, the switched reluctance motor (SRM) is proposed to replace the induction motor because of more reliable mechanical structure, better traction characteristic and higher efficiency compared to induction motor. And in order to solve smoothing revolution problem, instantaneous torque control method based on torque sharing function (TSF) is used. Finally the validity of the proposed method is verified through the simulation and experimental results.

키워드

참고문헌

  1. 일본 DAIDO(大同) 중기제작사 웹페이지, 'http://www.urban.ne.jp/home/daido/pdTop.htm'
  2. 안진우, '스위치 릴럭턴스 전동기', 오성미디어, pp. 1-454, 2004
  3. I. Husain and M. Eshani, 'Torque ripple minimization in switched reluctance motor drives by PWM current control', IEEE Trans. on Power Electronics, vol. 11, no. 1, pp. 83–88, 1996 https://doi.org/10.1109/59.544676
  4. N. H. Fuengwarodsakul, M. Menne, R. B. Inderka and R. W. De Doncker, 'High- dynamic four-quadrant switched reluctance drive based on DITC', IEEE Trans. on Industry Applications, vol. 41, pp. 1232-1242, 2005 https://doi.org/10.1109/TIA.2005.853381
  5. C. Choi, S. Kim, 'A New Torque Control Method of a Switched Reluctance Motor Using a Torque-Sharing Function', IEEE Trans. on Magnetics, vol. 38, no. 5, pp. 3288-3290, 2002 https://doi.org/10.1109/TMAG.2002.802295
  6. B. A. Griffin, 'High performance winch and synthetic rope systems for workboats, tug boats, and commercial marine applica- tions', OCEANS '04. MTS/IEEE TECHNO- OCEAN'04, Vol. 4, pp. 1900 - 1903, 2004

피인용 문헌

  1. A study on the control system design for ship mooring winch system vol.28, pp.3, 2014, https://doi.org/10.1007/s12206-013-1181-9
  2. Mooring Winch Control System Design Based on Frequency Dependent LQR Control Approach vol.38, pp.1, 2014, https://doi.org/10.5394/KINPR.2014.38.1.29
  3. 무어링 윈치 제어시스템 설계에 관한 연구 vol.17, pp.3, 2013, https://doi.org/10.9726/kspse.2013.17.3.089