초록
MB-OFDM UWB 시스템은 고속의 전송률을 달성하기위해 16-QAM형태의 dual carrier modulation(DCM)방식을 이용한다. DCM의 기본 아이디어는 4개의 입력비트를 서로 다른 형태의 2개의 16-QAM을 이용해 변조하고 2개의 변조결과를 최대한 멀리 떨어져 있는 2개의 OFDM 부반송파에 나눠서 중복 전송함으로써 하나의 부반송파가 복구할 수 없는 페이딩을 겪게 되더라도 다른 하나의 부반송파에 실려온 정보를 이용하여 전송한 4비트를 복조할 수 있다는 것이다. 두 개의 부반송파가 모두 열악한 페이딩을 겪게 될 확률은 매우 작으므로 DCM을 이용함으로써 성능향상을 기대할 수 있다. 기본적인 ML검출방식을 이용하여 신호를 복호할 경우 채널정보를 이용하지 않기 때문에 DCM의 본래 목적이라고 할 수 있는 다이버시티의 손실(loss in diversity)을 줄이자는 생각과 부합되지 않는다. 본 논문에서는 채널 상태 정보라는 여분의 신뢰할 만한 정보를 이용함으로써 더 좋은 성능을 얻을 수 있는 향상된 연판정 복조기법을 제안한다.
MB-OFDM (Multiband-orthogonal frequency division multiplexing) UWB (ultra wide band) system uses DCM (dual carrier modulation) scheme to achieve high-data rate transmission. The basic idea of DCM is that to transmit the 4 bits more reliably two 16-QAM (quadrature amplitude modulation) symbols are used and the two 16-QAM sysmbols are allocated to each subcarrier of OFDM with maximum-distance. In the case of using the DCM, if one 16-QAM symbol is broken by deep fadding channel, a receiver can detect the transmitted signal by using another 16-QAM symbol. In the conventional ML(maximum likelihood) decision scheme, since the receiver does not use the CSI (channel state information), loss in diversity can not be reduced. In this paper, we propose improved soft-decision scheme with CSI for higher performance of MB-OFDM UWB systemn.