한국전기전자재료학회논문지 (Journal of the Korean Institute of Electrical and Electronic Material Engineers)

  • 제20권5호
  • /
  • Pages.456-461
  • /
  • 2007
  • /
  • 1226-7945(pISSN)
  • /
  • 2288-3258(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

아르곤 이온빔을 이용한 CNT 페이스트 에미터의 표면처리에 관한 연구

A Study on the Surface Treatment of CNT Paste Emitter by Ar Ion Irradiation

  • 발행 : 2007.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, a surface treatment method using accelerated Ar ions was experimented for exposing the carbon nanotubes (CNT) from the screen-printed CNT paste. After making a cathode electrode on the glass substrate, photo sensitive CNT paste was screen-printed, and then back-side was exposed by UV light. Then, the exposed CNT paste was selectively remained by development. After post-baking, the remained CNT paste was bombarded by accelerated Ar ions for removing some binders and exposing only CNTs. As results, the field emission characteristics were strongly depended on the accelerating energy, bombardment time, and the power of RF plasma ion source. When Ar ions accelerated with 100 eV energy from the 100 W RF plasma source are bombarded on the CNT paste surface for 10 min, the emission level and the uniformity were best.

키워드

참고문헌

  1. C. A. Spindt, C. E. Holland, and R. D. Stowell, 'Field emission cathode array development for high current density application', Appl. of Surface Sci., Vol. 16, p. 268, 1983 https://doi.org/10.1016/0378-5963(83)90073-9
  2. M. Okuda, S. Matsutani, A. Asai, A. Yamano, K. Hatanako, T. Hara, and T. Nakariri, 'Electron Trajectory Analysis of Surface Conduction Electron Emitter Displays (SEDs)', SID 98 Digest, p. 185, 1998
  3. T. Kusunoki, M. Suzuki, S. Sasaki, T. Yaguchi, and T. Aida, 'Fluctuation-free electron emission from non-formed metalinsulator-metal (MlM) cathodes fabricated by low current anodic oxidation', Jpn. J. Appl. Phys., Vol. 32, p. L1695, 1993 https://doi.org/10.1143/JJAP.32.L1695
  4. T. Komoda, T. Ichihara, Y. Honda, T. Hatai, T. Baba, Y. Takegawa, Y. Watabe, and K. Aizawa, 'Demonstration of a Possibility for a Large Panel BSD by Fabricating 7.6 inches Diagonal Prototype Model', SID 03 Digest, p. 910, 2003
  5. Y. C. Kim, K. H. Shon, Y. M. Cho, and E. H. Yoo, 'Posttreatment-dependent current degradation and role of tube length on morphology of printed carbon nanotube field emitters', Jpn. J. Appl, Phys., Vol. 44, No. 26, p. L848, 2005 https://doi.org/10.1143/JJAP.44.L848
  6. H. Mizukami, M. Ojirna, S. Hiwatashi, H. Araki, A. Fujiti, M. Ozaki, and K. Yoshino, 'Fabrication and field emission properties of Coo nanorod formed by spin-cast treatment', Jpn. J. Appl. Phys., Vol. 44, No. 26, p. L851, 2005 https://doi.org/10.1143/JJAP.44.L851
  7. Y. H. Kim, C. J. Park, and K. J. Chang, 'Subbands in carbon nanotubes under radial deformation', J. Korean Phys. Soc., Vol. 37, p. 85, 2000
  8. H. S. Uh, 'Low tum-on voltage field emission triodes with selectively grown carbon nanotube emitters', J. Korean Phys. Soc., Vol. 45, p. 1343, 2003
  9. J. M. Bonard, J. P. Salvetat, T. Stockli, W. A. de Heer, L. Forro, and A. Chaelain, 'Field emission from single-wall carbon nanotube films', Appl. Phys. Lett., Vol. 73, p. 918, 1998 https://doi.org/10.1063/1.122037
  10. Q. H. Wang, M. Yan, and R. P. H. Chang, 'Flat panel display prototype using gated carbon nanotube field emitters', Appl. Phys. Lett., Vol. 78, p. 1294, 2001 https://doi.org/10.1063/1.1351847
  11. S. J. Kwon, 'Fabrication of CNT FEA self-aligned between gate and emitter using screen printing method', J. of KIEEME(in Korean), Vol. 19, No.4, p. 367, 2006 https://doi.org/10.4313/JKEM.2006.19.4.367
  12. S. J. Kwon and S. H. Lee, 'Field emission characteristics of a CNT - FEA fabricated by screen-printing of a photo-sensitive CNT paste', J. of KIEEME(in Korean), Vol. 19, No.1, p. 10, 2006 https://doi.org/10.4313/JKEM.2006.19.1.075