참고문헌
- 엄재근, 이민철, 최인수, 조유종, 전만수, 2006, 유한요소법을 이용한 고압유압펌프용 오목형 피스톤 조립체의 소켓 형상 설계, 대한기계학회논문집 A권, 제 30권, 제11호, pp. 1433-1438 https://doi.org/10.3795/KSME-A.2006.30.11.1433
- H. X. Su, K. Kawai, M. Hayama, 1991, Deformation mechanism in ring rotary forging of rings, JSTP, Vol. 32, No. 361, pp. 207-213
- M. Hayama, 1992, New rotary forming: Theoretical and application, Tokyo, Japan, pp. 55-122
- D. J. Yoon, S. Choi, K. H. Na, J. H. Kim, 1995, Simulation of rotary forging process by model material technique, KSTP, Vol. 4, No.1, pp. 9-16
- C. Hayashi, T. Yamakawa, 1997, Influence of feed and cross angle on rotary forging effects and redundant shear deformation in rotary piercing process, ISIJ International, Vol. 37, pp. 146-152 https://doi.org/10.2355/isijinternational.37.146
- K. Toda, T. Ishii, S. Kashiwagi, T. Mitarai, 2001, Development of hub units with shaft clinching for automotive wheel bearings, KOYO Engineering Journal, English Edition, No. 158E, pp.26-30
- N. Cho, N. Kim, T. Altan, 2003, Simulation of orbital forming process using 3-D FEM and inverse analysis for determination of reliable flow stress, 3rd JSTP International Seminar on Precision Forging, May 12-15, Nagoya, Japan
- S. Katayama, M. Kakiuchi, T. Kawabe, T. Wada, 2003, Metal flow behavior to fill grooved die by rotary forging, JSTP, Vol. 44, No. 508, pp. 58-62
- S. Katayama, T. Kakiuchi, T. Wada, 2003, Rigidplastic FEM analysis of deformation property in rotary forging, JSTP, Vol. 44, No. 513, pp. 38-42
- I. Hirohide, K. Takeyasu, 2001, Development of hub unit bearing with swaging, NSK Technical Report, Vol. 10, pp. 9-14
- 문호근, 정재헌, 전만수, 2003, 회전단조공정해석기술 개발, 제 8회 한국소성가공학회 단조 심포지엄, pp. 63-76
- H. K. Moon, M. C. Lee, J. H. Chung, M. S. Joun, 2005, Finite element analysis of a rotary forging process for bearing assembly, Proc. of the 8th ICTP, Verona, p. 333
- 이민철, 엄재근, 전만수, 2006, 오목형 피스톤 조립체의 볼과 소켓의 체결을 위한 점진적 성형공정의 유한요소해석, 한국소성가공학회 춘계학술대회 논문집, pp. 353-358
- 전만수 외 6명, 2006, 컨케이브형 피스톤 제조기술 개발, 연구보고서