한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제24권4호
  • /
  • Pages.123-130
  • /
  • 2007
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

크롬-몰리브덴강(SCM420)에 대한 프레팅 피로수명 예측에 관한 연구

A Study on Fretting Fatigue Life Prediction for Cr-Mo Steel(SCM420)

  • 곽동현 (경남대학교 대학원 기계설계학과) ;
  • 노홍래 (경남대학교 대학원 기계설계학과) ;
  • 김진광 (경남대학교 기계자동차공학부) ;
  • 조상봉 (경남대학교 기계자동차공학부)
  • 발행 : 2007.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, a lot of work and interest have been devoted to the development of multiaxial fatigue parameters for fretting fatigue life prediction. In this study, the fretting fatigue lift and critical location ware estimated and evaluated through the multiaxial fatigue theories in a cylinder-on-flat contact configuration far Cr-Mo steel, SCM420, the material commonly is used in gears of the automobile and rollers of the conveyor. The strain-life curve was obtained from fatigue test for SCM420. The Fretting fatigue life and critical location were estimated through stress distributions, SWT-parameters and FS-parameters obtained from FEA. This paper showed possibility of applying multiaxial fatigue theories to fretting fatigue lift prediction comparing predicted life with experimental results.

키워드

참고문헌

  1. Nowell, D., Dini, D. and Hills, D. A., 'Recent Developments in the Understanding of Fretting Fatigue,' Engng. Fract. Mech., Vol. 73, pp. 207-222, 2006 https://doi.org/10.1016/j.engfracmech.2005.01.013
  2. Giannakopoulos, A. E., Lindley, T. C. and Suresh, S., 'Aspects of Equivalence between Contact Mechanics and Fracture Mechanis,' Acta. mater., Vol. 46, pp. 2955-2968, 1998 https://doi.org/10.1016/S1359-6454(98)00011-1
  3. Yang, B. and Mall, S., 'On Crack Initiation Mechanisms in Fretting Fatigue,' J. Appl. Mech., Vol. 68, pp. 76-80, 2001 https://doi.org/10.1115/1.1344901
  4. Hertz, H., 'On the Contact of Elastic Solids,' J. reine und angewandte Mathematik, Vol. 92, pp. 156-171, 1982
  5. Mindlin, R. D., 'Compliance of Elastic Bodies in Contact,' J. Appl. Mech., Vol. 16, pp. 259-268, 1949
  6. Bramhall, R., 'Studies in Fretting Fatigue,' D. Phil. Thesis., University of Oxford, 1973
  7. Hills, D. A., Nowell, D. and O'Connor, J. J., 'On the Mechanics of Fretting Fatigue,' Wear, Vol. 125, pp. 129-156, 1988 https://doi.org/10.1016/0043-1648(88)90198-6
  8. Szolwinski, M. P. and Farris, T. N., 'Observation, Aalysis and Pediction of Fetting Ftigue in 2024-T351 Auminum Aloy,' Wear, Vol. 221, pp. 24-36, 1998 https://doi.org/10.1016/S0043-1648(98)00264-6
  9. Lykins, C. D., Mall, S. and Jain, V., 'An Evaluation of Parameters for Predicting Fretting Fatigue Crack Initiation,' Int. J. Fatigue, Vol. 22, pp. 703-716, 2000 https://doi.org/10.1016/S0142-1123(00)00036-0
  10. Sum, W. S., Williams, E. J. and Leen, S. B., 'Finite Element, Critical-plane, Fatigue Life Prediction of Simple and Complex Contact Configurations,' Int. J. Fatigue, Vol. 27, pp. 403-416, 2005 https://doi.org/10.1016/j.ijfatigue.2004.08.001
  11. Araujo, J. A. and Nowell, D. 'The Effect of Rapidly Varying Contact Stress Fields on Fretting Fatigue,' Int. J. Fatigue, Vol. 24, pp. 763-775, 2002 https://doi.org/10.1016/S0142-1123(01)00191-8
  12. Smith, K. N., Waston, P. and Topper, T. H., 'A Stress Strain Function for the Fatigue of Metals,' J. Mater, Vol. 15, pp. 767-778, 1970
  13. Szolwinski, M. P. and Farris, T. N., 'chanics of Fretting Fatigue Crack Formation,' Wear, Vol. 198, pp. 93-107, 1996 https://doi.org/10.1016/0043-1648(96)06937-2
  14. Szolwinski, M. P., Harish, G. and Farris, T. N., 'ornparison of Fretting Fatigue Crack Nucleation Experiments to Multiaxial Fatigue Theory Life Prediction,' Proceedings of the ASTM Syposium on high Cycle Fatigue, AD, Vol. 55, pp. 449-457, 1997
  15. Fatemi, A. and Socie, D., 'Critical Plane Approach to Multiaixal Fatigue Damage Including out of Phase Loading,' Fat. Fract. Engng. Mat. Struct, Vol. 11, No.3, pp. 149-165, 1988 https://doi.org/10.1111/j.1460-2695.1988.tb01169.x
  16. Wang, C. H. and Brown, M. W., 'Pathindependent Parameter for Fatigue under Proportional and Non-proportional Loading,' Fat. Fract. Engng. Mat. Struct, Vol. 12, pp. 1285-1298, 1993
  17. Roh, H. R., Jang, S. K. and Cho, S. B., 'Effects of Contact Zone according to Geometries and Mechanical Properties of Pad for Fretting Contacts,' of the KSPE, Vol. 22, No. 11, pp. 125-134, 2005
  18. Meggiolaro, M. A. and Castro, J. T. P., 'tatical Evaluation of Strain-life Fatigue Crack Initiation Predictions,' Int. J. Fatigue, Vol. 26, pp. 463-476, 2004 https://doi.org/10.1016/j.ijfatigue.2003.10.003