한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제15권2호
  • /
  • Pages.151-158
  • /
  • 2007
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

전기집진 기제를 조합시킨 DPF용 금속 폼 필터의 여과 특성

Filtration Characteristics of Metal Foam Filters for DPF Combined with Electrostatic Precipitation Mechanism

  • Park, Seok-Joo (Clean Energy System Research Center, Korea Institute of Energy Research) ;
  • Lee, Dong-Geun (Department of Mechanical Engineering, Chungnam National University) ;
  • Kim, Jin-Hyun (Department of Mechanical Engineering, Myongji University) ;
  • Cho, Gyu-Baek (Engine R&D Group, Korea Institute of Machinery and Materials) ;
  • Kim, Hong-Suk (Engine R&D Group, Korea Institute of Machinery and Materials) ;
  • Jeong, Young-Il (Engine R&D Group, Korea Institute of Machinery and Materials)
  • 발행 : 2007.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Filtration studies, using simulated test nanoparticles or diesel nanoparticles, have been performed about Inconel foam filters for DPF combined with electrostatic precipitation. The simulated test particles were synthesized by laser ablation in the nitrogen atmosphere at the standard condition. The diesel particles were exhausted from the diesel engine driven on the condition of idle or load mode. Filtration efficiency of the metal foam filter is very low because most of particles are penetrated through the large pores of filter. However, the efficiency was considerably improved by applying the electric field to the filter and/or charging the nanoparticles. Nevertheless, the pressure drop of filter hardly increased because the filter-pores were not clogged by deposited particles and kept open.

키워드

참고문헌

  1. Y. Jeong and M. Yoon, 'Trend of Diesel Particulate Filter Trap Technology,' Auto J., Vol.24, pp.39-43, 2002
  2. Y. Jeong, 'The Trend of Exhaust Emission Standard and Diesel Particulate Filter Trap Technology for Diesel Powered Vehicles,' Busan Engine International Symposium, pp.3-7, 2001
  3. A. Mayer, L. Hofer, J. Schlatter, H. Burtscher and J. Czerwinski, 'Health Effects, Measurement and Filtration of Solid Particles Emitted from Diesel Engines,' Technical Report of GRPE-PMP, pp.6-13, 2001
  4. N. Taoka, O. Kazushige, S. Hong, S. Hiroki, Y. Yutaka and K. Teruo, 'Effect of SiC-DPF with High Cell Density for Pressure Loss and Regeneration,' SAE 2001-01-0191, 2001
  5. S. Jr. Oglesby and G. B. Nichols, Electrostatic Precipitation, Marcel Dekker, New York and Basel, 1978
  6. S. J. Park, S. H. Lee, J. H. Lim, S. D. Kim and K. S. Lim, 'Electrostatic Precipitation Fiter Device for the Filtration of Particulate Matter Exhausted from Automobiles,' Patent Application Number 2006-0058855, 2006
  7. W. C. Hinds, Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles, A Wiley-Interscience Publication, John Wiley & Sons, Inc., 1999
  8. Y. S. Yoon, M. H. Oh, M. K. Kang and C. B. Lee, 'Characteristics of Particulate Matters in Exhaust Emissions from a Heavy Duty Diesel Vehicle,' Int. Conf. Proceeding, IPC-13, KSAE, pp.1042-1045, 2005
  9. D. B. Kittelson, 'Engines and Nanoparticles: A Review,' J. Aerosol Sci., Vol.29, pp.575-588, 1998 https://doi.org/10.1016/S0021-8502(97)10037-4