Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Estimation of Moving Loads by Measuring Dynamic Response

동적 거동계측을 통한 이동하중 추정

  • 조재용 (인하대학교 토목공학과) ;
  • 신수봉 (인하대학교 토목공학과) ;
  • 최광규 (동아대학교 토목공학과) ;
  • 권순정 (코레일 철도연구개발센터 기술연구팀)
  • Received : 2006.08.08
  • Published : 2007.07.30
Download PDF
⟨ Previous Next ⟩

Abstract

An algorithm is proposed for estimating axle loads of trucks moving over a bridge by measuring dynamic responses. The bridge was modeled by a beam structure in the current applications of the proposed algorithm. Among the state vectors, measured acceleration was used and displacement was computed from measured strain at the same location. Nodal force vectors were computed by using a ready-made database of equivalent nodal force transformation matrix. The algorithm was examined through simulation studies and laboratory experiments. The effects of measurement noise and velocity error were investigated through simulation studies.

본 논문에서는 교량상을 이동하는 차량의 차축하중을 교량의 동적거동을 계측하여 추정하는 알고리듬을 제안하였으며, 교량을 보로 모델하여 알고리듬을 적용하였다. 가속도는 교량에서 직접 계측하였으며, 변위는 가속도와 같은 위치에 부착한 변형률을 변환하여 계산하는 식을 제안하였다. 절점하중벡터는 속도별로 준비해둔 절점하중변환행렬 데이터베이스를 사용하여 구하였다. 개발된 알고리듬을 수치예제와 실내모형실험을 통해 검증하였다. 수치예제에서는 계측오차와 속도 및 위치오차가 하중식별에 미치는 영향을 분석하였다.

Keywords

References

  1. 권순정, 임동환, 신수봉, "Modal SI 기법을 위한 최적 측정위치 결정," 대한토목학회논문집, 24권 1A호, 2004. 1. pp. 177-183.
  2. 류지영, 조재용, 신수봉, "영향면을 사용한 이동하중식별," 한국전산구조공학회 2001년도 가을 학술발표회 논문집, 2001. 10. pp. 261-268.
  3. 홍진석, 조재용, 신수봉, "구조물에 작용하는 정적하중의 식별," 대한토목학회 2001년도 학술발표회, 논문집 CD, 2001. 11.
  4. 황의성, 배두병, 정경섭, 조재병, "BWIM시스템을 이용한 중차량의 통행특성 분석," 한국강구조학회논문집, 11권 2호, 1999, 4. pp. 223-232.
  5. 정지원, 신수봉, "다축모멘트 영향선과 밀도추정함수를 사용한 이동하중식별 알고리듬의 개발," 한국구조물진단학회 논문집, Vol. 10(5), 2006.
  6. Berzeri, M. & Shabana, A.A, "Development of simple models for the elastic forces in the absolute nodal co-ordinate formulation," Journal of Sound and Vibration, Vol. 235(4), 2000. pp. 539-565. https://doi.org/10.1006/jsvi.1999.2935
  7. Ichikawa, M, Miyakawa, Y. & Matsuda, A, "Vibration analysis of the continuous beam subjected to a moving mass," Journal of Sound and Vibration, Vol. 230(3), 2000. pp. 493-506. https://doi.org/10.1006/jsvi.1999.2625
  8. Jiang, R.J, Au, F.T.K., Cheung, Y.K, "Identification of masses moving on multi-span beams based on a genetic algorithm," Computers and Structures, 81, 2003. pp. 2137-2148. https://doi.org/10.1016/S0045-7949(03)00298-0
  9. Jiang, R.J., Au. F.T.K., Cheung, Y.K., "Identification of vehiclesmoving on continuous bridges with rough surface," Journal of Sound and Vibration, Vol. 274, 2004. pp.1045-1063. https://doi.org/10.1016/S0022-460X(03)00664-3
  10. Ojio, T., Yamada, K., "Bridge WIM by Reaction Force Method", Proceedings of the Fourth Iternational Conference On Weigh-In-Motion. ICWIM4, 2005. pp. 107-118.
  11. Savin,E, "Dynamic amplification factor and response spectrum for the evaluation of vibrations of beams under successive moving loads," Journal of Sound and Vibration, Vol. 248(2), 2001. pp. 267-288. https://doi.org/10.1006/jsvi.2001.3787
  12. Zhu, X.Q, Law, S.S, "Dynamic axle and wheel loads identification : laboratory studies," Journal of Sound and Vibration, Vol. 268, 2003. pp. 855-879. https://doi.org/10.1016/S0022-460X(02)01557-2
  13. Zhu, X.Q. & Law, S.S,, "Identification of moving interaction forces with incomplete velocity information," Mechanical Systems and Signal Processing, Vol. 17(6), 2003. pp. 1349-1366. https://doi.org/10.1006/mssp.2002.1577