초록
본 연구는 잣나무와 낙엽송을 대상으로 흉고직경급에 따른 임목의 용도별 이용재적 및 목재수율을 산출하기 위해 수행되었다. 먼저 기존에 개발된 수간곡선, 수고 추정식을 이용하여 입목의 형상에 따른 수간 재적량을 산출하였다. 그리고 일반용재와 펄프재의 이용재적 및 조재수율, 일반용재를 판재 및 각재로 가공했을 때 제재목의 이용재적 및 조재수율을 직경급별로 산출하였다. 연구결과에 따르면 수간재적에 있어서 낙엽송의 재적이 잣나무보다 동일한 흉고직경급에 있어서 23~38% 높게 나타났다. 일반용재 생산은 2개 수종 모두 흉고 직경급 18 cm부터 가능하였다. 또한 일반용재와 펄프재용 원목의 조재수율 합계는 흉고직경이 커지는 초기에 급격하게 증가하였고 잣나무의 경우 흉고직경 26 cm에서 90%, 낙엽송의 경우 흉고직경 38 cm에서 88%로 최대로 나타났다. 한편 판재의 조재수율은 23~56%, 각재는 그 생산크기가 커질수록 조재수율이 떨어지는 것으로 나타났다. 이 연구의 결과는 산림의 이용재적 산출 및 임목평가 그리고 제재목의 결정에 활용될 수 있을 것이다.
This study was conducted to estimate merchantable volume and yield per diameter (DBH) class of Pinus koraiensis and Larix kaempferi. Stem volume of trees in each diameter class was calculated using the existing equations for taper and height curve. Saw logs and pulpwood volume were then estimated from the stem volume in each diameter class. The final step was to estimate merchantable volume and yield from saw logs, assuming saw logs were used for lumber (boards or dimension products) production only. The results showed that the stem volume of Larix kaempferi was 23~38% higher than that of Pinus koraiensis at the same diameter classes. Both species were able to produce saw logs from the diameter class of 18 cm. Saw logs and pulpwood yield for both species rapidly increased due to the size limitation on small end diameter. This yield reached a maximum of 90% and 88% at 26 cm and 38cm diameter class, respectively, for Pinus koraiensis and Larix kaempferi. Lumber yield estimated for board products ranged from 23% to 56%. In the case of dimension products, Lumber yield became significantly smaller as saw logs were used for larger dimension products. These results can be used for calculating merchantable volume and economic value of trees, as well as determining final lumber products.