The Evaluation of Surface Scaling and Resistance of Concrete to Frost Deterioration with Freezing-Thawing Action by Salt Water

염화물이 함유된 동결수의 동결융해 작용에 따른 콘크리트의 내동해성과 표면열화 평가

  • 김규용 (충남대학교 공과대학 건축공학과) ;
  • 김무한 (충남대학교 공과대학 건축공학과) ;
  • 조봉석 (충남대학교 건축공학과) ;
  • 이승훈 (삼성물산(주) 건설부문 기술연구소)
  • Received : 2006.11.19
  • Published : 2007.11.30

Abstract

This study presents the experimental results of frost durability including resistance to freezing-thawing and surface scaling of concrete. Mixing design was proportioned with the various water-binder ratio between 0.37 and 0.47 and three different binder compositions corresponding to Type I cement without any supplementary cementitious materials(OPC), Type II cement with 50% blast-furnace slag replacement(BFS50), and ternary cement with Type III cement, 15% fly ash, and 35% slag replacement (BFS35%+FA15%). Test results showed that the mixing design with BFS50% and BFS35%+FA15% exhibited higher durability factor than that made with OPC only. Finally, the use of blend cement containing slag can be used effectively in terms of frost durability of the concrete exposed to severe condition under coastal environment like as flying salt, sea water spray, etc.

본 연구에서는 염화물이 함유된 동결수에 의한 콘크리트의 내동해성을 검토하기 위하여 동결융해 및 표면스케일링 저항성을 평가하고자 하였으며, 이를 위한 배합으로서 물결합재비는 0.37, 0.42, 0.47의 3수준, 결합재 방식은 일반 OPC 콘크리트, 고로슬래그 미분말 50%의 2성분계 콘크리트 및 플라이애시 15%와 고로슬래그 미분말 35%의 3성분계 콘크리트로 설정하였다. 그 결과, 고로슬래그 미분말 50% 및 플라이애시 15%와 고로슬래그 미분말 35%의 혼합 시멘트계 콘크리트의 경우 일반 OPC 콘크리트에 비하여 동결융해 및 표면스케일링 저항성이 상대적으로 우수하게 나타났으며, 이를 통해 내구성 저하가 우려되는 해양 환경 하에서 비래염분 및 비말 등의 해수의 작용에 의한 콘크리트의 내구성 저하현상을 억제하기 위한 방안으로서 슬래그의 활용이 유효함을 확인할 수 있었다.

Keywords

References

  1. 湯淺 界 外 3人 若材齡から乾燥を受けたコンクリ-トの耐凍結融解性, 일본건축학회구조계논문집, 제526호 1999年12月, pp. 9-16.
  2. 竹田宣典, 河茂幸 : 凍害と凍害の複合劣化作用がコンタリ-トの耐久性に及ぼす影響, 콘크리트공학연차논문보고집, Vol. 23, No. 2, 2001, pp. 427-432.
  3. 湯淺 界 外 3人 若材齡から乾燥を受けたコンクリ-トの耐凍結融解性, 日本建築学会構造系論文集, Vol. 359, 1999. 12, pp. 9-16.
  4. 加藤ら, 高强度コンクリ-ト用混和劑に關すろ硏究、日本建築学会講演梗概集, 1991, 9, pp. 753-754.
  5. 島藤ら, 高爐スラグを用した高强度コンクリ-トの諸性質について, 日本コンンクリート工学年次論文報告集, Vol. 13, No. 1, 1991, pp. 275-280.