Abstract
The objective of the present study is to provide statistical resistance statistics for steel-concrete composite plate girder sections under positive and negative moments. Statistical properties on yield strength, tensile strength, elongation, and fracture toughness of domestic structural steel products, gathered from an analysis of over 16,000 samples, were evaluated. Using the steel samples for the plate girder, the bias factor and the coefficient of variation of the ultimate flexural resistance for representative composite plate girder sections under positive and negative flexures were presented. In calculating the ultimate flexural resistance of the composite section, the moment curvature relationships were developed using the incremental load approach considering material nonlinearity for the steel girder. The predicted statistics can be used in the future for the efficient calibration of LRFD code.
국내 LRFD 도로교설계규정의 휨에 대한 재료 저항계수 정립 시 기초 통계자료로 활용하기 위하여 국산 강재를 적용한 강합성 플레이트 거더 단면의 정모멘트 및 부모멘트 하 휨저항강도를 통계적으로 분석하였다. 최근 국내에서 생산된 16,000여 표본의 구조용 강재와 철근에 대한 항복강도와 인장강도 등의 기계적 특성을 통계적으로 분석하여, 공칭강도에 대한 편심계수(bias factor)와 변동계수(coefficient of variation)를 구하였다. 이들 국산 강재와 철근을 적용하여 정 부모멘트를 받는 도로교 강합성 플레이트 거더교 대표단면에 대한 재료 비선형 소성해석을 수행하였으며, 해석결과로부터 모멘트-곡률 곡선을 구하고 단면의 휨저항강도를 산정하였다. 공칭휨강도와 극한휨저항강도를 비교하고 대표적 강합성 단면에 대한 편심계수와 변동계수 통계치를 제시하였다.