한국가시화정보학회지 (Journal of the Korean Society of Visualization)

  • 제5권2호
  • /
  • Pages.20-25
  • /
  • 2007
  • /
  • 1598-8430(pISSN)
  • /
  • 2093-808X(eISSN)
한국가시화정보학회 (The Korean Society of Visualization)
권호 표지
DOI QR코드

DOI QR Code

역설계에 의한 비행기의 형상 구현과 수치계산에 의한 유동 가시화

Geometry Realization of an Airplane and Numerical Flow Visualization

  • 김양균 (순천대학교 대학원 기계공학과) ;
  • 김성초 (순천대학교 기계우주항공공학부) ;
  • 김정수 (순천대학교 기계우주항공공학부) ;
  • 최중욱 (순천대학교 기계우주항공공학부) ;
  • 박정 (부경대학교 기계공학부)
  • 발행 : 2007.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The geometry of a commercial passenger airplane is realized based on a Boeing 747-400 model through the photographic scanning and reverse engineering. The each element consisting of the plane such as fuselage, wing, vertical fin, stabilizer and engines, is individually generated and then the whole body is assembled by the photomodeler. The maximum error in the realized airplane is about 1.4% comparing with the real one. The three-dimensional inviscid steady compressible governing equations are solved in the unstructured tetrahedron grid system, and in a finite volume method using STAR-CD when the airplane flies at the cruise condition. The pressure distribution on the surface and the wing-tip vortices are visualized, and in addition to the aerodynamics coefficients, lift and drag are estimated.

키워드

참고문헌

  1. Paul, E. C., 1994, "A CFD Analysis of a Full Configuration Fighter Aircraft," Master Thesis, Mississippi State University.
  2. Wurtzler, K. E. and Morton, S. A., 2006, "Accurate Drag Prediction Using Cobalt," J. of Aircraft, Vol. 43, No.1, pp.10-16. https://doi.org/10.2514/1.8589
  3. Brodersen, O. and Stürmer, A., 2001, "Drag Prediction of Engine-Airframe Interference Effects Using Unstructured Navier-Stokes Caculations," AIAA Paper 2001-2414.
  4. Pirzadeh, S. Z and Frink, N. T., 2002, "Assessment of the Unstructured Grid Software TetrUSS for Drag Prediction of the DLR-F4 Configuration," AIAA paper 2002-0839.
  5. Hemsch, M. J. and Morrison, J. H., 2004, "Statistical Analysis of CFD Solutions from 2nd Drag Prediction Workshop," AIAA Paper 2004-0556.
  6. Rumsey, C. L., Rivers, S. M. and Morrison, J. H., 2004, "Study of CFD Variation on Transport Configurations from the Second Drag-Prediction Workshop," AIAA paper 2004-0394.
  7. Craft, T. J., Gerasimov, A. V., Launder, B. E. and Robinson, C. M. E., 2006, "A Computational Study of the Near-field Generation and Decay of Wingtip Vortices," Int'l J. of Heat and Fluid Flow, Vol.27, pp.684-695. https://doi.org/10.1016/j.ijheatfluidflow.2006.02.024
  8. Leoviriyakit, K. and Jameson A., 2003, "Aerodynamic Shape Optimization of Wings Including Planform Variations," AIAA paper 2003-0210.
  9. Allison, D. O. and Sewall, W. G., 1995, "Airfoil Modification Effects on Subsonic and Transonic Pressure Distributions and Performance for the EA-6B Airplane," NASA TP 3516.
  10. Jung, S-H. and Lee, J-K, 2005, "Precision Measurement for Aircraft Alignment Using Industrial Photogrammetry," J. of KSAS, Vol.33, No.6, pp.57-63. https://doi.org/10.5139/JKSAS.2005.33.6.057
  11. Kim, Y., Kim, S., Choi, J. and Kim, J. S., 2006, "Geometry Realization of an Aircraft by Reverse Engineering Based on Photo Images," Sunchon Nat'l Univ. J., Vol.25, pp.189-194.
  12. Kim, C. and Chang, B. H., 2007, "Generation of Aerodynamic DB for KA32T Helicopter Simulator," Proceeding of the 2007 KSAS Spring Conference, pp.45-48.