Air Pollutant Emission Factors from Composite Wood Products Manufacturing in Korea

  • Published : 2007.12.31

Abstract

In Korea, there is a general lack of information available on air emissions from industry. The reasons for this include the lack of regulatory requirements for emission monitoring, limited information on specific industries, and difficulties in monitoring certain sources. This paper presents the first detailed air pollutant emission factors from composite wood product manufacturing in Korea. This study introduced emission factors for wood-based panels such as plywood, particle board (PB), and medium density fiberboard (MDF). The emission factors of particulate matters (PM) and hazardous air pollutants (HAPs) from MDF were higher than that from other wood products. The concentration of total volatile organic compounds (TVOCs) for hot press from wood-based panels was higher than drying or gluing processes. Emissions data from NPIP were compared to the data from the suggested emission factors in this study and the US EPA's. The data from our emission factors were closer to the observed results than the data using the US EPA's emission factor.

Keywords

References

  1. CITEPA (Centre Interprofessional technique de la Pollution Atmospherique) (1992) Corinair Inventory-Default emission factors handbook, 2nd Edition (CEC-DGXI, Paris)
  2. Colak, S. and G. Colakoglu (2004) Volatile acetic acid and formaldehyde emission from plywood treated with boron compound, Building and Environment, 39, 533-536 https://doi.org/10.1016/j.buildenv.2003.08.019
  3. Guo, H., F. Murray, and S.C. Lee (2002) Emissions of total volatile organic compounds from pressed wood products in an environmental chamber. Building and Environment, 37, 1117-1126 https://doi.org/10.1016/S0360-1323(01)00107-X
  4. KPI (2002) Korea Price Information, from http://www.kpi.or.kr/data, Korea
  5. NIER (1999) Standard method for Air Pollution, Chapter 3 (National Institute of Environmental Research, Incheon, Korea)
  6. Sullivan, R. and I. Woods (2000) Using emission factors to characterize heavy metal emissions from sewage sludge incinerators in Australia, Atmospheric Environment, 34, 4571-4577 https://doi.org/10.1016/S1352-2310(00)00121-7
  7. Sullivan, R., K. Zeise, and J. Smith (1998) Establishing emission estimation techniques for Australia. Proceedings of 14th International Clean Air & Environment Conference, 14-18, Melbourne, pp. 136-141
  8. US EPA (1995) Code of federal regulations 40 Part 60 Appendix A. The office of the Federal Register National Archives and Records Administration (US Government printing office, Washington DC)
  9. US EPA (1997) Procedures for preparing emission factor 0064ocuments. Office of Air Quality Planning and Standards, Office of Air and Radiation (USEPA, Research Triangle Park, NC, USA)
  10. US EPA (2000) Method 18. Measurement of gaseous organic compound emissions by gas chromatography (US Government printing office, Washington DC)
  11. US EPA (2003) Compilation Air Pollutant Emission Factors Volume 1. Stationary Point and Area Sources, Fifth Edition, AP-42. Chapter 10. Wood Products Industry (US Environmental Protection Agency, Office of Air Quality Planning and Standards, research Triangle park, NC, USA)