Abstract
The objective of this study is to remove BTEX(Benzene, Toluene, Ethylene, Xylene) and TPH(Total Petroleum Hydrocarbon) effectively by using method low thermal desorption. The thermal desorption is frequently selected because it can treat various contaminants effectively. The temperature and heating time are determined by TGA(Thermogravimetric analysis) curve. The experiment result from this research, removal rate of BTEX was up to 100% within 5 minutes and removal rates of TPH were more than 65% at $300^{\circ}C$ and 70% at $500^{\circ}C$ respectively. It was observed that there was a little change of removal rates of TPH.
본 연구 목적은 유류오염토의 TPH(석유계 총탄화수소) 및 BTEX(벤젠, 톨루엔, 에틸렌, 크실렌)를 제거하기 위해 저온 열탈착 공법을 사용하였다. 열 탈착 기술은 오염원의 종류나 농도에 관계없이 단기간에 완전처리가 가능하며, 공정의 신뢰도가 높아 현장처리 적용이 용이한 공정으로 잘 알려져 있다. 본 연구에서 저온 열탈착 공법의 온도범위와 체류시간을 결정하기 위해 TGA 곡선을 통하여 도출하였다. 기초실험을 통해 도출된 온도범위인 $300\sim500^{\circ}C$ 범위에서 BTEX 및 TPH 의 농도변화를 실험한 결과, BTEX는 $300^{\circ}C$ 운전 시 5분 내에 완전히 제거되는 것으로 나타났으며, TPH 의 경우, $300^{\circ}C$ 운전 시 65%의 제거율을 나타냈으며, $500^{\circ}C$ 운전 시에는 70% 이상의 제거율을 나타냈다. 그러나 체류시간에 따른 TPH 제거율은 크게 나타나지 않았다.