• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.163-166
• /
• 2000

The purpose of this study is to evaluate substrate interactions of BTEX for multicomponent. Although BTEX compounds have similar chemical structures, biodegradation of individual BTEX is different with the present of certain BTEX compounds. The biodegradation rate is order to Benzene=Toluene>Ethylbenzene> m, p-Xylene>o-Xylene. Xylenes is stimulated when benzene or toluene is present. Especially o-xylene Inhibit other BTEX compounds.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1999.10a
• /
• pp.19-22
• /
• 1999

A microbial consortium derived from a gasoline-contaminated sites was enriched on toluene in 100-mL serum bottle and was found to degrade benzene(B), toluene(T), ethylbenzene(EB), and xylenes(X). Studies conducted to determine the temperature effects and BTEX concentration on BTEX degradation. The results indicated that lowering temperature significantly decreased BTEX degradation rates and varing the BTEX concentration also changed substrate degradation patterns.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.393-402
• /
• 2006

The contamination characteristics of BTEX and TPH components in silty soils with the oil leakage event from point source were studied. The over ratios of three soil pollution standard for TPH component were $1.5{\sim}1.7$ times higher than that of BTEX component. The mean and maximum values of BTEX and TPH components with sample points were B-zone > A-zone > C-zone, and the highest concentrations were measured at $1{\sim}2m$ depth below surface. BTEX and TPH components were increased with linear distance in zone within 120 m and 80 m from point source. For the zone more than 120 m, BTEX and TPH concentrations were under soil pollution standard. The cutoff values of indicator kriging using BTEX and TPH components were defined as confirmative limit, warn- ing limit and counterplan limit. The variograms of indicator-transformed data were selected linear model. The contamination ranges of BTEX and TPH components using confirmative limit and warning limit were estimated similar, but the contamination range of those using counterplan limit was much reduced. The maximum contamination probabilities were estimated by probability maps usinB confirmative limit, warning limit and counterplan limit. The maximum contamination probabilities with three soil pollution standard were estimated 26%, 26% and 13% for BTEX component, and 44%, 38% and 26% for TPH component.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.45-53
• /
• 1999

The soil samples were measured at 90 sites of Soil's Network In 1997~1998 which was established for the investigation of soil contamination in Seoul. This study was more focused to measure and analyze for BTEX(Benzene, Toluene, Ethylbenzene and Xylene) concentration in the Soil Network. Also, the samples were analyzed by Purge & Trap method. As a result, the BTEX were detected at all sampling sites in Seoul. The Min. Max and Mean BTEX concentration were respectively 0.047mg/kg, 2.618mg/kg and 0.437mg/kg in 1998. The concentration of the BTEX detected at all sampling sites was lower than that of the intervention standards(at industrial areas) of Soil Preservation Act.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.248-251
• /
• 2004

유류로 오염된 토양에 과산화수소를 주입 후 펜톤유사반응을 유도하여 유류오염토양의 복원 가능성을 조사해 보았다. 과산화수소의 분할 주입 후 TPH와 BTEX 제거율은 최고 99.04 %와 99.25%로 각각 나타났으며, BTEX와 TPH가 혼합 오염된 토양에서 펜톤유사반응을 적용하였을 때 BTEX의 분해보다 TPH의 분해가 빠르게 진행되는 것을 알 수 있었다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.773-779
• /
• 2013

This study was performed to provide the basic data for the function of BTEX removal for compact electrostatic precipitator which are applicable to indoor environment (or closed spaces). For this purpose, the adsorption equilibrium test was conducted for BTEX of activated carbon sheet (ACS) and activated carbon (AC), and the adsorption characteristics of AC and ACS were evaluated using the Langmuir constant which was obtained from the adsorption characteristics, adsorption capacity and regression calculation. The surface area and adsorption pore volume of ACS reduced by 70% and 86%, respectively, as compared to those of AC, and the adsorption capacities of BTEX also showed a similar level. Thus, it is considered that ACS applied electrostatic precipitator is able to remove dust and BTEX simultaneously.

• Journal of Korean Society on Water Environment
• /
• v.27 no.2
• /
• pp.167-177
• /
• 2011

Billions of barrels of briny produced water are generated in the United States every year during oil and gas production. The first step toward recovering or reusing this water is to remove the hazardous organics dissolved in the briny produced water. Biological degradation of hazardous volatile compound could be possible regardless of salinity if they were extracted from briny water. In the current work, the effectiveness of a vapor phase biofilter to degrade the gas-phase contaminants (benzene, toluene, ethylbenzene and xylenes, BTEX) extracted from briny produced water was evaluated. The performance of biofilter system responded well to short periods when the BTEX feed to the biofilter was discontinued. To challenge the system further, the biofilter was subjected to periodic spikes in inlet BTEX concentration as would be expected when it is coupled to a Surfactant-Modified Zeolite (SMZ) bed. Results of these experiments indicate that although the BTEX removal efficiency declined under these conditions, it stabilized at 75% overall removal even when the biofilter was provided with BTEX-contaminated air only 8 hours out of every 24 hours. Benzene removal was found to be the most sensitive to time varying loading conditions. A passive, granular activated carbon bed was effective at attenuating and normalizing the peak BTEX loadings during SMZ regeneration over a range of VOC loads. Field testing of a SMZ bed coupled with an activated carbon buffering/biofilter column verified that this system could be used to remove and ultimately biodegrade the dissolved BTEX constituents in briny produced water.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.3
• /
• pp.88-94
• /
• 2016

The simultaneous biodegradation between MTBE (Gasoline additives) and BTEX (Benzene, Toluene, Ethyl-benzene, o-Xylene, m-Xylene, p-Xylene) was achieved within a competitive inter-relationship, with not only electron accepters such as nitrate, sulfate, and iron(III) without oxygen, but also with electron donors such as MTBE and BTEX. Preexisting indigenous microorganisms from a domestic sample of gasoline contaminated soil was used for a lab-scale batch test. The result of the test showed that the biodegradation rate of MTBE decreased when there was co-existing MTBE and BTEX, compared to having just MTBE present. The growth of indigenous microorganisms was not affected in the case of the MTBE treatment, whereas the growth of the microorganisms was decreased in combined MTBE and BTEX sample. This may indicate that an inhibitor related to biodegradation when BTEX and MTBE are mixed will be found. This inhibitor may be found to retard the anaerobic conditions needed for efficient breakdown of these complex carbon chain molecules in-situ. Moreover, it is also possible that an unknown competitive reaction is being imposed on the interactions between MTBE and BTEX dependent on conditions, ratios of mixture, etc.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.414-418
• /
• 2014

BACKGROUND: Benzene, toluene, ethylbenzene and xylene (BTEX), which are volatile aromatic hydrocarbons and main constituents of gasoline, are neuro-carcinogenic organic pollutants in soil and groundwater. Korea Ministry of Environment has established the maximum permissible level of BTEX in arable soil to 1, 20, 50 and 15 mg/kg, respectively. METHODS AND RESULTS: To understand an arable soil contamination by BTEX, we collected 92 samples from the arable lands around oil reservoir, and analyzed the BTEX residue using a GC-MS with head-space sampler. A linear correlation between BTEX concentration and peak areas was detected with coefficient correlations in the range of 0.9807-0.9995. The method LOQ of BTEX was 0.002, 0.014, 0.084, and 0.038 mg/kg, respectively. Recoveries of 0.5 mg/kg BTEX were found to be 73.7-96.9%. The precision was reliable since RSD percentage (0.7-7.5%) was below 30, which was the normal percent value. Also, BTEX in all samples were detected under the LOQ. CONCLUSION: These results showed that the investigated arable soils around airport and oil reservoir in Korea were not contaminated by oils.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.3-8
• /
• 2000

A simple and rapid simultaneous analysis method of BTEX and TPH in soil was developed. 5g of soil sample were mixed with sodium sulfate and then extracted with 10 mL of mixture of acetone and dichloromethane (1:1). Extraction was performed for 10 min in sonicator and analysis was with GC-FID. The detection limits of BTEX and TPH was 0.8 and 10 mg/kg, respectively. The analytical recoveries were >90% for all BTEX and TPH. Low boiling point fuels and high boiling point fuels are consistently reproduced within RSD 7%. The analysis results show very simple and rapid quantitation of BTEX and TPH in soil sample with low RSD.