Preparation and Characteristics of Silicone Modified Polyacrylic Hybrid Elastomer

실리콘 변성 폴리아크릴졔 Hybrid Elastomer의 제조와 그 특성

  • Lee, Byoung-Chul (Hyperstructured Organic Materials Research Center, Deparment of polymer Science & Engineering, Dankook University) ;
  • Kang, Doo-Whan (Hyperstructured Organic Materials Research Center, Deparment of polymer Science & Engineering, Dankook University)
  • 이병철 (고차구조형 유기산업재료 연구센타 및 단국대학교 고분자공학과) ;
  • 강두환 (고차구조형 유기산업재료 연구센타 및 단국대학교 고분자공학과)
  • Published : 2007.01.31

Abstract

Polydimethylsiloxane branched HEMA (SH) was Prepared by reacting polydimethylsilorane prepolymer and 2-hydroxyethyl methacrylate (HEMA). Polyacrylate modified Polyorganosiloxane (SMPA) was prepared by polymerization of methacrylic acid(MA), allyl glycidyl ether(AGE), aminopro- pyltrimethoxysilane (APTS), and SH. Their structures were confirmed by the measurement of FTIR and $^1H-NMR$ and thermal properties of SMPA were studied from TGA. Residual weight of SMPA at $400^{\circ}C$ increased according to increasing content of the APTS to 63 from 55%. SMPA sealant was prepared by adding additives, such as viscosity increasing agent, crosslinking agent, and fillers. Adhesion characteristics of SMPA-3 sealant was determined to be maximum load elongation, 2.01 %, and break load elongation, 2.28%. Adhesion characteristics for SMPA sealant prepared from SMPA-3 were better than those for SMPA sealant prepared from SMPA-1 and SMPA-2.

Polydimethylsiloxane prepolymer와 2-hydroxyethyl methacrylate (HEMA)를 이용하여 Polydimethylsiloxane을 도입한 HEMA(SH)를 제조하였다. 여기에 methacrylic acid (MA), allyl glycidyl ether(AGE) 및 aminopropyltrimethoxysilane (APTS)를 이용하여 실록산 변성 polyacrylate hybrid(SMPA)를 제조하고 이들의 구조를 FTIR 및 $^1H-NMR$로 확인하였다. SMPA에 대한 내열특성을 TGA를 통해 측정한 결과 $400^{\circ}C$에서 무게 잔존율($W_{tr}$, %)은 APTS의 함량이 증가할수록 55에서 63%로 증가하여 나타났다. 제조한 SMPA에 증점제, 가교제 등의 각종 첨가제들을 가하여 SMPA 실란트를 제조하였다. 접착특성을 측정한 결과 SMPA-3를 이용하여 제조한 실란트의 경우 concrete와 금속사이의 최대 하중 신장률은 2.01%. 파괴 하중 신장률은 2.28%로 SMPA-1 및 SMPA-2를 이용하여 제조한 실란트의 1.07, 1.45%와 1.02, 1.35%인 경우보다 증가되었다.

Keywords

References

  1. N. N. Lakovenko and O. S. Shevchuk, Applied Chem., 71, 1634 (1998)
  2. I. Yigor, J. E. McGrath, J. S. Riffle, and L. L. Wickes, Polym. Bull., 8, 535 (1982)
  3. K. F. Muller and P. Harisiades, EP 632145 (1995)
  4. G. KoBmehl and W. Neumaun, Makromol. Chem., 187, 1381 (1986)
  5. J. P. Pascault and Y. Camberlin, Polym. Commun., 27, 230 (1986) https://doi.org/10.1016/0032-3861(86)90061-3
  6. J. E. McGrath, J. S. Riffle, and L. Yilgor, ACS Symp. Ser., 211, Chapter 2 (1983)
  7. T. T. Hsieh, K. H. George, P. Simon, and C. Tiu, Polymer, 40, 31539 (1999)
  8. G. Scott, U. S. Pat. 5,618,967 (1997)
  9. D. W. Kang, Y. M. Kim, and D. K. Kweon, Polymer, 22, 4 (1998)
  10. M. Y. L. Chew, X. Zhou, and Y. M. Tay, Polym. Test., 20, 87 (2001) https://doi.org/10.1016/S0142-9418(00)00058-1
  11. M. Y. L. Chew, Polym. Test., 19, 643 (2000)
  12. P. L. Kuo, K. C. Chen, and T. L. Wang, Polymer, 38, 5203 (1997)
  13. T. Ozawa, Bull Chem, Soc. Jpn., 50,1965 (1981)