Polymer(Korea) (폴리머)

The Polymer Society of Korea (한국고분자학회)
권호 표지

Preparation and Characteristics of Polypyrrole/sulfonated Poly(2,6-dimethyl-1,4-phenylene oxide) Composite Electrode

폴리피롤/설폰화 폴리(2,6-디메틸-1,4-페닐렌 옥사이드) 복합전극의 제조 및 특성

  • Huh, Yang-Il (Faculty of Applied Chemical Engineering, Chonnam National University) ;
  • Jung, Hong-Ryun (Faculty of Applied Chemical Engineering, Chonnam National University) ;
  • Lee, Wan-Jin (Center for Functional Nano Fine Chemicals, Chonnam National University)
  • 허양일 (전남대학교 응용화학공학부) ;
  • 정흥련 (전남대학교 응용화학공학부) ;
  • 이완진 (전남대학교 기능성나노신화학소재사업단)
  • Published : 2007.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

Polypyrrole (PPy) was made by an emulsion polymerization using iron (III) chloride ($FeCl_3$) as an initiator and dodecyl benzene sulfuric acid (DBSA) as an emulsifier and dopant. Poly (2,6-dimethyl-1,4-phenylene oxide) (PPO) was sulfonated by chlorosulfonic acid (CSA). The cathode was composed of $PPy^+DBS^-$ complex, conductor powder, and PPO or sulfonated poly (2,6-dimethyl-1,4-phenylene oxide) (SPPO) as a binder or dopant. The charge-discharge performance of $PPy^+DBS^-/SPPO$ cathode was increased as the extent of about 50%, than $PPy^+DBS^-/PPO$. This is because SPPO played a role as a binder as well as a dopant. In addition, sulfonation brings out the increase of miscibility between PPy and SPPO, and the increase of contact area between cathode and electrolyte.

[ $PPy^+DBS^-$ ] 복합체는 유화중합에 의해 제조되었고 이때 iron(III) chloride($FeCl_3$)는 개시제로, dodecyl benzene sulfonic acid(DBSA)는 계면활성제 및 도판트로 사용되었다. Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)는 chlorosulfonic acid(CSA)를 사용하여 설폰화되었고 양극은 $PPy^+DBS^-$ 복합체, 도전제 그리고 바인더로 구성되며 이때 바인더로 PPO와 설폰화된 poly (2,6-dimethyl-1,4-phenylene oxide) (SPPO)를 사용하였다. $PPy^+DBS^-/SPPO$ 양극은 $PPy^+DBS^-/PPO$에 비해 약 50% 높은 충 방전 성능을 나타내었는데 이는 SPPO가 바인더뿐만 아니라 도판트로 작용했기 때문이다. 더욱이 바인더로 사용된 고분자의 설폰화는 전도성 고분자와의 coulombic attraction을 유발시켜 두 상간의 혼화성을 증가시켰을 뿐만 아니라 양극과 전해질 사이의 접촉면적을 증가시켜 전기화학적으로 우수한 성능을 나타나게 했다.

Keywords

References

  1. K. Gurunathan, D. P. Amalnerkar, and D. C. Trivedi, Mater. Lett., 57, 1642 (2003) https://doi.org/10.1016/S0167-577X(02)01045-5
  2. J. Wang, C.O. Too, D. Zhou, and G.G. Wallace, J. Power Sources, 140, 162 (2005) https://doi.org/10.1016/j.jpowsour.2004.08.040
  3. Y. H. Lee, W. S. Shim, and D. S. Lee, Polymer(Korea), 23, 587 (1999)
  4. J.-M. Kim, H.-W. Lee, S.-H. Song, S.-M. Chang, J.-E. Sohn, H. Muramatsu, and Y.-K. Chang, Polymer(Korea), 22,106 (1998)
  5. W.-C. Chen and T.-C. Wen, J. Power Sources, 117, 273 (2003) https://doi.org/10.1016/S0378-7753(03)00158-7
  6. T.-M. Wu, Y.-W. Lin, and C.-S. Liao, Carbon, 43, 734 (2005) https://doi.org/10.1016/j.carbon.2004.10.043
  7. V. Khomenko, E. Frackowiak, and F. Beguin, Electrochimica Acta, 50, 2499 (2005) https://doi.org/10.1016/j.electacta.2004.10.078
  8. G. Y. Han, J. Y. Yuan, G. Q. Shi, and F. Wei, Thin Solid Films, 474, 64 (2005) https://doi.org/10.1016/j.tsf.2004.08.011
  9. K. S. Ryu, Y. G. Lee, K. -s. Han, Y. J. Park, M. G. Kang, N.-G. Park, and S. H. Chang, Solid State lonics, 175, 765 (2004) https://doi.org/10.1016/j.ssi.2003.12.049
  10. F. Xie, Z. Tian, H. Meng, and P. K. Shen, J. Power Sources, 141, 211 (2005) https://doi.org/10.1016/j.jpowsour.2004.10.002
  11. J. -H. Park, J. -H. Kim, H. -K. Lee, T. -H. Lee, and Y. -I. Joe, Electrochimica Acta, 50 , 765, (2004)
  12. H. K. Lee, J. Y. Kim, J. H. Park, Y. G. Joe, and T. H. Lee, J. Power Sources, 131, 188 (2004) https://doi.org/10.1016/j.jpowsour.2003.12.038
  13. R. C. Patil, S. Radhakrishnan, and K. Ogura, Polymer Degradation and Stability, 73, 7 (2001) https://doi.org/10.1016/S0141-3910(00)00198-1
  14. T. L. A. Campos, D. F. Kersting, and C. A. Ferreira, Surf. Coat. Tech., 122, 3 (1999)
  15. M. Yoo, C. W. Frank, S. Mori, and S. Yamaguchi, Polymer, 44, 4197 (2003) https://doi.org/10.1016/S0032-3861(03)00364-1
  16. M. Manickam and M. Takata, Electrochimica Acta. 48, 957 (2003) https://doi.org/10.1016/S0013-4686(02)00808-3
  17. M. Wachtler, M. R. Wagner, M. Schmied, M. Winter, and J. O. Besenhard, J. Electroanal. Chem., 510,12 (2001) https://doi.org/10.1016/S0022-0728(01)00554-X
  18. W.-J. Lee, H.-R. Jung , C. Kim, M. S. Lee, J.-H. Kim, and K. S. Yang, Synth. Met., 143, 59 (2004) https://doi.org/10.1016/j.synthmet.2003.10.010
  19. W.-J. Lee, Y.-J. Kim, M.-O. Jung, D.-H. Kim, D. L. Cho, and S. Y. Kang, Synth. Met., 123, 327 (2001)
  20. R. Scherer, A. M. Bernardes, M. M. C. Forte, J. Z. Ferreira, and C. A. Ferreira, Mater. Chem. Phys., 71, 131 (2001) https://doi.org/10.1016/S0254-0584(00)00501-0
  21. S. S. Im and S. W. Byun, J. Appl. Polym. Sci., 51, 1221 (1994)