DOI QR코드

DOI QR Code

코일 형상을 고려한 모세관 냉매유량 예측 상관식

An Empirical Correlation of Refrigerant Flow Rate Through Coiled Capillary Tubes

  • 박차식 (고려대학교 대학원 기계공학과) ;
  • 장용희 (고려대학교 대학원 기계공학과) ;
  • 이영수 (한국에너지기술연구원 미활용지열연구센터) ;
  • 김용찬 (고려대학교 기계공학과)
  • 발행 : 2007.01.01

초록

Air-conditioners use a spirally coiled capillary tube as an expansion device to enhance compactness of the unit. However, most empirical correlations in open literature were developed for straight capillary tubes without considering coiled effects on the mass flow rate. The objectives of this study are to investigate the flow characteristics of coiled capillary tubes and to develop a generalized correlation for mass flow rate through coiled capillary tubes. The mass flow rates through the coiled capillary tubes and straight capillary tubes were measured by varying operating conditions and tube geometry. The condensing temperatures varied at 40.5, 47.5 and $54.5^{\circ}C$, and subcoolings altered at 3.5, 6.5 and $11.5^{\circ}C$. The mass flow rates of the coiled capillary tubes decreased by 5 to 16% compared with those of the straight capillary tubes at the same operating conditions. An empirical correlation was developed by introducing equivalent length of capillary tube with non-dimensional parameters for coiled shape. The present correlation predicts the data with average and standard deviations of 0.33% and 3.24%, respectively.

키워드

참고문헌

  1. Erth, R. A., 1970, 'Two-Phase Flow in Refrigeration Capillary Tube : Analysis and Prediction,' Ph. D. Thesis., The Univ. of Purdue
  2. Goldstein, S. D., 1981, 'A Computer Simulation Method for Describing Two-Phase Flashing Flow in Small Diameter Tubes,' ASHRAE Trans., Vol. 87, pp. 51-60
  3. Li, R. Y., Lin, S. and Chen, Z. H., 1990, 'Numerical Modeling of Thermodynamic Non-Equilibrium Flow of Refrigerant Through Capillary Tubes,' ASHRAE Trans., Vol. 96, Part 1, pp. 542-549
  4. Kuehl, S. J. and Goldschmidt, V. W., 1991, 'Modeling of Steady Flows of R-22 Through Capillary Tubes,' ASHRAE Trans., Vol. 97, Part 1, pp. 139-148
  5. Yufeng, Z., Guobing, Z., Hui, X. and Jing, C., 2005, 'An Assessment of Friction Factor and Viscosity Correlations for Model Prediction of Refrigerant Flow in Capillary Tubes,' Int. J. Energy Res., Vol. 29, pp. 233-248 https://doi.org/10.1002/er.1050
  6. Bolstad, M. and Jordan, R. C., 1948, 'Theory and use of the Capillary Tube Expansion Devices,' Refrigerating Engineering, Vol. 29, No. 6, pp. 519-523
  7. Wolf, D. A., Bittle, R. R. and Pate, M. B., 1995, 'Adiabatic Capillary Tube Performance with Alternative Refrigerants,' ASHRAE Final Report No. RP-762
  8. Melo, C., Ferreira, R. T. S., Neto, C. B., Goncalves, J. M. and Mezvial, M. M., 1999, 'An Experimental Analysis of Adiabatic Capillary Tubes,' Applied Thermal Eng., Vol. 19, pp. 669-684 https://doi.org/10.1016/S1359-4311(98)00062-3
  9. Kim, S. G., Kim, M. S. and Ro, S. T., 2002, 'Experimental Investigation of the Performance of R22, R407C and R410A in Several Capillary Tubes for Air-Conditioners,' Int. J. of Ref., Vol. 25, pp. 521-531 https://doi.org/10.1016/S0140-7007(01)00039-1
  10. Hong, G. S., 2000, 'An Experimental Study on the Effects of Oil on Refrigerant Flow Through Capillary Tubes,' Ph. D Thesis, Korea Univ., Korea
  11. Ito, H., 1959, 'Friction Factors for Turbulent Flow in Curved Pipes,' Transactions of ASME, Journal of Basic Engineering, Vol. 81, pp. 123-134