참고문헌
- Isayev, A. I., 'Molding Processes, in Handbook of Industrial Automation,' Marcel Dekker, New York, pp. 573-606, 2000
- Klepek, G., 'Manufacturing Optical Lens by Injection Compression Molding,' Kunststoffe, Vol. 77, p. 13, 1987
- Yang, S. Y. and Chen, Y. C., 'Experimental Study of Injection-Charged Compression Molding of Thermoplastic,' Advances in Polymer Technology, Vol. 17, pp. 353-360, 1998 https://doi.org/10.1002/(SICI)1098-2329(199824)17:4<353::AID-ADV6>3.0.CO;2-Q
- Yang, Y. and Ke, M. Z., 'Experimental Study of Injection Compression Molding,' Proc. SPE ANTEC'93, pp. 2182-2187, 1993
- Yang, S. Y. and Ke, M. Z., 'Experimental Study on the Effects of Adding Compression to Injection Molding Process,' Advances in Polymer Technology, Vol. 14, pp. 15-24, 1995 https://doi.org/10.1002/adv.1995.060140102
- Michaeli, W. and Wielpuetz, M., 'Optimization of the Optical Quality of Polymer Glasses in the Injection Compression Molding Process,' Macromol. Mater. Eng., Vol. 284/285, pp. 8-13, 2000 https://doi.org/10.1002/1439-2054(20001201)284:1<8::AID-MAME8>3.3.CO;2-T
- Isayev, A. I. and Hieber, C. A., 'Toward a Viscoelastic Modeling of the Injection Molding of Polymers,' Rheol. Acta., Vol. 19, pp. 168-182, 1980 https://doi.org/10.1007/BF01521928
- Isayev, A. I. and Azari, A. D., 'Viscoelastic Effect in Compression Molding of Elastomers: Shear-Free Squeezing Flow,' Rubber Chemistry and Technology, Vol. 59, pp. 868-882, 1986
- Isayev, A. I., Zhang, Y. and Zook, C., 'Advances in the Flow and Rheology of Non-Newtonian Fluids,' Balkema Publishers, Rotterdam, pp. 1011-1067, 1999
- Osswald, T. A. and Tucker, C. L., 'Compression Mold Filling Simulation for Non-Planar Parts,' Intern. Polymer Processing V, pp. 79-87, 1990
- Kim, I. H., Park, S. J., Chung, S. T. and Kwon, T. H., 'Numerical Modeling of Injection/Compression Molding for Center-Gated Disk: Part II. Effect of Compression Stage,' Polym. Eng. Sci., Vol. 39, pp. 1943-1951, 1999 https://doi.org/10.1002/pen.11587
- Lee, Y. B., Kwon, T. H. and Yoon, K., 'Numerical Prediction of Residual Stresses and Birefringence in Injection/Compression Molded Center-Gated Disk: Part 2. Effects of Processing Conditions,' Polym. Eng. Sci., Vol. 42, pp. 2273-2292, 2002 https://doi.org/10.1002/pen.11115
- Shyu, G. D. and Isayev, A. I., 'Residual Stresses and Birefringence in Injection Molded Disks,' SPE ANTEC Tech Papers, Vol. 41, pp. 2911-2916, 1995
- Chen, S. C., Chen, Y. C. and Cheng, N. T., 'Simulation of Injection-Compression Mold-Filling Process,' Int. Comm. Heat Mass Transfer, Vol. 25, pp. 907-917, 1998 https://doi.org/10.1016/S0735-1933(98)00082-7
- Chen, S. C., Chen, Y. C. and Peng, H. S., 'Simulation of Injection-Compression-Molding Process, Part 2: Influence of Process Characteristics in Part Shrinkage,' Appl. Polym. Sci., Vol. 75, pp. 1640-1654, 2000 https://doi.org/10.1002/(SICI)1097-4628(20000328)75:13<1640::AID-APP10>3.0.CO;2-L
- Chen, S. C., Chen, Y. C. and Peng, H. S., 'Simulation of Injection-Compression-Molding Process, Part 3: Effect of Process Conditions on Part Birefringence,' Advance in Polymer Technology, Vol. 21, pp. 177-187, 2002 https://doi.org/10.1002/adv.10024
- Fan, B. and Kazmer, D. O., 'Simulation of Injection-Compression Molding for Optical Media,' Polym. Eng. Sci., Vol. 43, pp. 596-606, 2003 https://doi.org/10.1002/pen.10048
- Tait, P. G., 'Physics and Chemistry of the Voyage of H.M.S. Challenger,' Scientific Papers LXI, Vol. 2, No. 4, 1988
- Janeschitz-Kriegl, H., 'Polymer Melt Rheology and Flow Birefringence,' Springer, Berlin, 1983
- Wang, V. W., Hieber, C. A. and Wang, K. K., 'Dynamic Simulation and Graphics for the Injection Molding of Three-Dimensional Thin Parts,' J. Polym. Eng., Vol. 7, pp. 21-45, 1986
- Isayev, A. I., ed., 'Modeling of Polymer Processing: Recent Developments,' Hanser, Munich, 1991
- Shyu, G. D., Isayev, A. I. and Lee, H. S., 'Residual Stresses and Birefringence in Injection Molded Disks,' Korea-Australia Rheology J., Vol. 15, pp. 159-166, 2003
- Sobhanie, M. and Isayev, A. I., 'Viscoelastic Simulation of Flow of Rubber Compounds,' Rubb. Chem. Tech., Vol. 62, pp. 939-956, 1989 https://doi.org/10.5254/1.3536285
- Han, S., Huh, Y. J. and Kang, S., 'Optimum Design of Process Conditions to Minimize Residual Stress and Birefringence,' International Journal of Precision Engineering and Manufacturing, Vol. 2, No. 2, pp. 17-25, 2001