한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제15권5호
  • /
  • Pages.133-138
  • /
  • 2007
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

길들이기 과정을 고려한 변속기용 기어의 접촉피로 수명 해석

The Contact Fatigue Life Analysis of Transmission Gear considering Running-in

  • 문길환 (부산대학교 정밀기계공학과) ;
  • 이상돈 (부산대학교 정밀기계공학과) ;
  • 조용주 (부산대학교 기계공학부)
  • Moon, Kil-Hwan (Precision and Mechanical Engineering, Pusan National University) ;
  • Lee, Sang-Don (Precision and Mechanical Engineering, Pusan National University) ;
  • Cho, Yong-Joo (Department Mechanical Engineering, Pusan National University)
  • 발행 : 2007.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Surface pitting is a major failure mode for gears. The contact fatigue life analysis of transmission gear considering running-in process is presented in this paper. Surface roughness change of rolling test is used in a life analysis. Contact stresses are obtained by contact analysis of a semi-infinite solid based on the use of influence functions; the subsurface stress field is obtained using rectangular patch solutions. Mesoscopic multiaxial fatigue criterion which can yield satisfactory results for non-proportional loading is then applied to predict fatigue damage. Suitable counting method and damage rule were used to calculate the fatigue life of random loading caused by rough surface. The life analysis considering running-in is in good agreement with the experimental results.

키워드

참고문헌

  1. S. Way, 'Pitting due to Rolling Contact,' J. Appl. Mech., Vol.2, pp.A49-A58, 1935
  2. T. E. Tallian, 'Simplified Contact Fatigue Life Prediction Model: Part 1. Review of Published Models,' J. Trib., Vol.114, pp.207-213, 1992 https://doi.org/10.1115/1.2920875
  3. X. Dufourg, Pitting des Engrenages de Boite de Vitesse, Ph. D. Dissertation, Universite de Paris-Sud, Orsay, France, 1995
  4. A. C. Batista, 'Contact Fatigue of Aautomotive Gears : Evolution and Effects of Residual Stresses Introduced by Surface Teatments,' Fatigue Fract. Engng. Mater. Struct., Vol.23, pp.217-228, 2000 https://doi.org/10.1046/j.1460-2695.2000.00268.x
  5. M. Sraml, 'Numerical Procedure for Predicting the Rolling Contact Fatigue Crack Initiation,' Int. J. Fatigue, Vol.25, pp.585-595, 2003 https://doi.org/10.1016/S0142-1123(03)00019-7
  6. I. V. Papadopoulos, 'Multiaxial fatigue limit criterion of metals (Chapter 3), High Cycle Metal Fatigue,' ed. Dang Van, K. Y., Papadopoulos, I. V., Springer-Verlag Wien, New York, pp.89-143, 1999
  7. W. D. Kim, B. I. Choi, S. W. Han and J. H. Kim, 'Bending Fatigue Strength of Carburized and Induction Hardened Gea,' Transactions of KSAE, Vol.2, No.6, pp.1-8,1994
  8. A. E. H. Love, 'Stress Produced in a Semiinfinite Solid by Pressure on Part of the Boundary,' Phil. Trans. Royal Society, A228, pp.377-420, 1929
  9. Y. J. Cho, T. W. Kim and M. J. Lee, 'The Stress Field in Body Caused by the Tangential Force of a Rectangular on a Semi-infinite Solid,' KSTLE Int. J., Vol.2, No.1, pp.29-34, 2001
  10. T. E. Langlais, 'Multiaxial Cycle Counting for Critical Plane Methods,' Int. J. Fatigue, Vol.25, pp.641-647, 2003 https://doi.org/10.1016/S0142-1123(02)00148-2