DOI QR코드

DOI QR Code

장기폭로실험에 의한 철근콘크리트 구조물의 보수재료.공법 성능평가

Performance Evaluation of Repair Material and Method for Reinforced Concrete Structure by Long Term Exposure Experiment

  • Kim, Moo-Han (Dept. of Architectural Engineering, Chungnam National University) ;
  • Kim, Gyu-Yong (Dept. of Architectural Engineering, Chungnam National University) ;
  • Cho, Bong-Suk (Dept. of Architectural Engineering, Chungnam National University) ;
  • Kim, Young-Duck (Dept. of Architectural Engineering, Chungnam National University) ;
  • Kim, Young-Sun (Dept. of Architectural Engineering, Chungnam National University)
  • 발행 : 2007.02.28

초록

본 연구에서는 최근 국내에서 신기술 등으로 인증되어 활용되고 있는 보수재료 공법을 적용한 폭로시험체를 제작한 후, 해양환경 및 일반 대기환경 하에서 장기폭로실험에 의한 정량적 폭로실험 데이터를 확보함으로서 향후 성능저하된 철근콘크리트 구조물의 보수재료 공법 성능평가 방법 및 품질관리기준 확립을 위한 기초 자료를 제시하고자 하였다. 해양 및 일반 대기환경 하에서 폭로재령 30개월까지 폭로실험을 실시한 결과 탄산화 및 염화물이온 침투 깊이는 피복두께에 비해 매우 적게 침투하였으며, 철근의 부식 면적과 부식 속도 결과를 토대로 폭로재령 30개월까지 철근 부식의 주된 원인은 내재 염화물량 및 매크로셀에 의한 부식이 가장 큰 원인으로 판단된다. 향후 폭로시험체의 지속적인 평가를 통하여 정량적인 폭로실험 데이터를 확보함으로서 보수재료 공법 성능 평가 방법 및 품질 관리 기준 확립을 위한 기초 자료를 제시할 수 있을 것으로 판단된다.

In this study, for the establishment of the performance evaluation methods and the quality control standards of durability recovery method, the quantitative exposure data by long term exposure test under the coast and normal atmosphere is accumulated and analyzed. Investigating and evaluating the result of exposure test during 30 months of exposure age under the coastal and normal atmosphere environment, carbonation depth and chloride-ion penetration depth very little penetrated than cover depth. It seems reasonable to conclude that main cause of Corrosion of reinforcing bar are chloride-ion and macro cell from the result of corrosion area and corrosion velocity. Therefore, it is considered to be applied as the fundamental data on the performance evaluation and quality control standards of repair material and method through continuous exposure test in the future.

키워드

참고문헌

  1. 건설교통부, '염해 및 탄산화 피해를 입은 콘크리트 구조물의 내구성 회복을 위한 보수공법 시스템 개발 및 실용화 방안', 건설기술연구개발사업 연차보고서, 2003. 4, pp.555-723
  2. 김무한, 조봉석, 김영덕, 윤종기, 김재환, 김용로, '표면 피복종휴에 따른 복합열화환경하의 철근콘크리트 부식 특성에 관한 실험적 연구', 한국콘크리트학회 가을학술 발표회 논문집, 15권 2호, 2003. 11, pp.86-89
  3. 기상청, http://www.kma.go.kr. 기후통계자료
  4. 정해문, 유환구, 류총현, 안태송, 김수만, 오병환, '해양 환경에 위치한 국내 고속도로 교량의 비래염분량 측정 결과', 한국콘크리트학회 봄학술발표회 논문집, 14권 1호, 2002. 5, pp.743-748
  5. 日本建築撃舎, 高耐久性鍛筋コンクリートの設計施工指針 (案) 同解説, 日本建築皐舎, 1991, pp.179-184
  6. 이종득, 철근부식진단, 도서출판 일광, 2001. 11, pp.1-12
  7. 日本コンクリート工率協合, コンクリート構造物の補修工 法研究委員舎報告書(III) 補修工法の性能評債のための暴 露貰験ー, 1996. 10, pp.1-44
  8. 日本建築事合, 鍛筋コンクリート造建築物の耐久性調査 診断および補修指針(案) 同解説イす2.補修工法の補修殻呆 評償試験(案), 1997, pp.203-216
  9. lIS A 6203, セメント混和用ポリマーディスパーション及 ぴ再乳化形粉末樹脂ラITS, Japan, 1996
  10. Jieyaing Zhang, et al, 'Corrosion of Concrete Reinforcement and Electrochemical Factors in Concrete Patch Repair', Canadian Journal of Civil, Vol.33, pp.785-793
  11. C. Andrade, C. Alonso, and J. Sarr, 'Corrosion rate evolution on concrete structures exposed to the atmosphere', Cement & Concrete Composites, 2002, pp.55-64
  12. 須田久美子, S. Misra, et at, '腐食ひびわれ後生限界量に 閲する解樟的検討', コンクリート工事年次論文報告集, Vol.14, No.1, 1992, pp.751-756
  13. 武若耕司ほか, 'コンクリート中の銭筋腐食がRC部材の力 撃的性肢に及ぼす影響', 第6回コンク\)ート工準年三文講演 舎論文集, 1984

피인용 문헌

  1. Quick Judgments of Properties of Fine Aggregate to Use the Electric Arc Furnace Oxidizing Slag vol.11, pp.5, 2011, https://doi.org/10.5345/JKIBC.2011.11.5.442
  2. Study of Polymer Rapid Setting Cement Concrete Using Electric Arc Furnace Oxidizing Slag Aggregate vol.21, pp.1, 2012, https://doi.org/10.7844/kirr.2012.21.1.030
  3. Characteristics of polyester polymer concrete using spherical aggregates from industrial by-products vol.129, pp.5, 2013, https://doi.org/10.1002/app.39025
  4. System Melting Compound vol.25, pp.2, 2013, https://doi.org/10.4334/JKCI.2013.25.2.209
  5. Characteristics of Concrete Polymer Composite Using Atomizing Reduction Steel Slag (I) (Use of PMMA as a Shrinkage Reducing Agent) vol.25, pp.2, 2014, https://doi.org/10.14478/ace.2014.1003
  6. Characteristics of Concrete Polymer Composite Using Atomizing Reduction Steel Slag as an Aggregate (II) (Use of Polystyrene as a Shrinkage Reducing Agent) vol.25, pp.4, 2014, https://doi.org/10.14478/ace.2014.1044
  7. Characteristics of Polyester Polymer Concretes Using Spherical Aggregates from Industrial By-Products (III) (Using an Atomizing Steel Slag as a Filler and Fine Aggregate) vol.26, pp.1, 2015, https://doi.org/10.14478/ace.2014.1131
  8. Characteristics of Polyester Polymer Concrete Using Spherical Aggregates from Industrial By-Products(II)(Use of Fly Ash and Atomizing Reduction Steel Slag) vol.53, pp.3, 2015, https://doi.org/10.9713/kcer.2015.53.3.364
  9. Development of Concrete and Evaluation of Properties of Combined Steel making Slag Aggregates for Offshore Structure Production (I) vol.25, pp.2, 2016, https://doi.org/10.7844/kirr.2016.25.2.49
  10. Development of Concrete and Evaluation of Properties of Combined Steel making Slag Aggregates for Offshore Structure Production(II) vol.25, pp.2, 2016, https://doi.org/10.7844/kirr.2016.25.2.60