DOI QR코드

DOI QR Code

Cell Fabrication and Performances of SOFC prepared by DBM and SPM

  • Kim, Gwi-Yeol (School of Electrical Engineering, University of Ulsan)
  • Published : 2007.12.31

Abstract

The research and development for the solid oxide fuel cell have been promoted rapidly and extensively in recent years, because of their high efficiency and future potential. Therefore this paper describes the manufacturing method and characteristics of anode electrode for solid oxide fuel cell, by the way, Ni-YSZ materials are used as anode of solid oxide fuel cell widely. In order to reduce production costs, we have fabricated single solid oxide fuel cell by doctor blade and screen printing method. Disk-type planar solid oxide fuel cell with an effective electrode area of about $7cm^2$ were fabricated and run for 500 h to investigate cell performance. The current density at a voltage of 0.7 V was $850mA/cm^2$.

Keywords

References

  1. Leo J. M. J. Blomen and Michael N. Mugerwa, 'Fuel cell Systems', Plenum, p. 465, 1993
  2. S. C. Singhal and H. Iwahara, 'Solid oxide fuel cells', The Electrochemical Society, p. 171, 1993
  3. N. Q. Minh and T. Takahashi, 'Science and technology of ceramic fuel cell', Elsevier, p. 147, 1995
  4. K. Kordesch and G. Simader, 'Fuel cells and their applications', VCH Publishers. Inc., p. 9, 1996
  5. US Department of Energy, 'Fuel cell handbook', John Wiley & Sons, 5th edition, p. 110, 2000
  6. W. Vielstich, A. Lamm, and H. A. Gasteiger, 'Handbook of fuel cells', John Wiley & Sons., p. 219, 2003
  7. F. Zenith and S. Skogestad, 'Control of fuel cell power output', Journal of process control, p. 333, 2007 https://doi.org/10.1016/j.jprocont.2006.10.004
  8. B. L. Ahn and S. G. Lee, 'Electrical properties of $BaTiO_{3}$ thick films fabricated by screen printing method', Trans. EEM, Vol. 8, No. 4, p. 149, 2007 https://doi.org/10.4313/TEEM.2007.8.4.149