Journal of Environmental Science International (한국환경과학회지)

The Korean Environmental Sciences Society (한국환경과학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the New Method by EMPLUX for Soil-Remediation(1)

토양오염 복원을 위한 EMPLUX를 사용한 새로운 방법에 대한 연구

  • Published : 2007.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The utility of soil-gas surveys is directly proportional to their accuracy in reflecting and representing changes in the subsurface concentrations of source compounds. Passive soil-gas vapor-phase is merely a fractional trace of the source, so, as a matter of convenience, the units used in reporting detection values from EMFLUX surveys are smaller than those employed for source-compound concentrations. According to the Leaking Underground Storage Tank(LUST) Program Annual Report, approximately 16 U.S. million dollars were spent for environmental site investigations at over 1,600 Underground Storage Tank(UST) sites and approximately over 1,000 acres of land was characterized and remediated in the State of Illinois in the year of 2003 alone. The main purpose of this study is to propose an idea to significantly reduce the site investigation cost by utilizing a passive soil-gas survey and conventional intrusive drilling method and to fully define the three dimensional characteristics of subsurface contamination from two industrial drycleaning facilities.

Keywords

References

  1. TITLE 35: Environmental Protection, Subtitle G: Waste Disposal, Chapter I: Pollution Control Board, Subchapter f: Risk based cleanup objectives, Part 742, Tiered Approach to Corrective Action Objectives, 2002, 37
  2. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 5092 Practice for Design and Installation of Ground Water Monitoring Wells in Aquifers, 320pp
  3. Test Methods for Evaluating Solid Waste Physical/Chemical Methods (The EPA publication SW-846), 2000, 12-15
  4. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), E 1527 Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process, 320pp
  5. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 1452 Practice for Soil Investigation and Sampling by Auger Borings, 320pp
  6. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 653 Terminology Relating to Soil, Rock, and Contained Fluids, pp. 320
  7. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 1586 Test Method for Penetration Test and Split-Barrel Sampling of Soils, 320pp
  8. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 2487 Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), 320pp
  9. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 2488 Practice for Description and Identification of Soils (Visual-Manual Procedure), 320pp
  10. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 4220 Practices for Preserving and Transporting Soil Samples, 320pp
  11. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 4448 Guide for Sampling Ground-Water Monitoring Wells, 320pp
  12. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 4700 Guide for Soil Sampling From the Vadose Zone, 320pp
  13. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 4750 Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well), 320pp
  14. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 5314 Guide for Soil Gas Monitoring in the Vadose Zone, 320pp
  15. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 5434 Guide for Field Logging of Subsurface Explorations of Soil and Rock, 320pp
  16. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 5521 Guide for Development of Ground- Water Monitoring Wells in Granular Aquifers, 320pp
  17. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 5730 Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone, and Ground Water, 320pp
  18. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 5784 Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices, 320pp
  19. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 5979 Guide for Conceptualization and Characterization of Ground-Water Systems, 320pp
  20. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 6001 Guide for Direct-Push Water Sampling for Geoenvironmental Investigations, 320pp
  21. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, D 6169 Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations, 320pp
  22. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, E 1528 Practice for Environmental Site Assessments: Transaction Screen Process, 320pp
  23. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, E 1689 Guide for Developing Conceptual Site Models for Contaminated Sites, 320pp
  24. ASTM Standards Related to the Phase II Environmental Site Assessment Process (2nd ed.), 2001, E 1903 Guide for Environmental Site Assessments: Phase II Environmental Site Assessment Process, 320pp
  25. METHOD 8260B, 1996, Volatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS) Revision 2, 1-86