Journal of Powder Materials (한국분말재료학회지)

The Korean Powder Metallurgy & Materials Institute (한국분말재료학회 (*구 분말야금학회))
권호 표지
DOI QR코드

DOI QR Code

Application of PM to the Consolidation of Metallic Glassy Powder and its Composites

분말야금공정을 이용한 비정질 및 복합체 합금 분말의 벌크화 거동

  • Shin, Su-Min (Advanced Materials Division, Korea Institute of Industrial Technology) ;
  • Kim, Taek-Soo (Advanced Materials Division, Korea Institute of Industrial Technology) ;
  • Lee, Jin-Kyu (Advanced Materials Division, Korea Institute of Industrial Technology) ;
  • Song, Min-Seok (Shinhan Diamond Industrial Co., Ltd.) ;
  • Kim, Jeong-Gon (Incheon City College)
  • 신수민 (한국생산기술연구원 신소재본부) ;
  • 김택수 (한국생산기술연구원 신소재본부) ;
  • 이진규 (한국생산기술연구원 신소재본부) ;
  • 송민석 (신한다이아몬드공업(주)) ;
  • 김정곤 (시립인천전문대학)
  • Published : 2007.12.28
Download PDF
⟨ Previous Next ⟩

Abstract

In the present study, Zr-base metallic glass (MG) and Zr-base BMG/diamond composites were fabricated using a combination of gas atomization and spark plasma sintering (SPS). The microstructure, thermal stability and mechanical property of both the specimens as atomized and sintered were investigated. The experimental results showed that the SPSed specimens could be densified into nearly 100% and maintained the initial thermal stability at the sintering temperature of 630K. In addition, MG/diamond powder composites were successfully synthesised using SPS process. The composites, even a very low diamond volume fraction, generated a significant increase in compressive strength. With increasing the diamond volume fraction, the compressive strength was also increased due to the addition of hardest diamonds. It suggests that these composites would be potential candidates for a new cutting tool material.

Keywords

References

  1. A. Inoue: Acta Mater., 48 (2000) 279 https://doi.org/10.1016/S1359-6454(99)00300-6
  2. M. Tokita: Mater. Sci. Forum, 83 (1999) 308
  3. S. Y. Lee, T. S. Kim and J. K. Lee: Intermetallics, 14 (2006) 1000 https://doi.org/10.1016/j.intermet.2006.01.018
  4. J. K. Lee, D. H. Bae, S. Yi and W. T. Kim: J. Mater. Res., 19 (2004) 2221 https://doi.org/10.1557/JMR.2004.0286
  5. Y. Kawamura, T. Shibata, A. Inoue and T. Masumoto: Scripta. Mater., 37 (1997) 431 https://doi.org/10.1016/S1359-6462(97)00105-X
  6. G. Xie, H. Kimura and A. Inoue: Appl. Phy. Lett., 90 (2007) 241902 https://doi.org/10.1063/1.2748102
  7. Y. Kawamura, H. Kato, A. Inoue and T. Masumoto: Mater. Sci. Eng. A, 219 (1996) 39 https://doi.org/10.1016/S0921-5093(96)10437-8
  8. G. Q. Zhang., X. J. Li, M. Shao, L. N. Wang, J. L. Yang, L. P. Gao, L. Y. Chen and C. X. Liu.: Mater. Sci. Eng. A, (2008) In press
  9. B. Prakash: Wear, 258 (2005) 217 https://doi.org/10.1016/j.wear.2004.09.010