초록
경기도 하남시 풍산동 소재 시험시추공에서 획득된 SPS 속도검층자료를 이용하여 이 지역에 분포하는 호상편마암의 동적물성치를 추정하였다. 연구방법은 전처리과정과 속도분석, 감쇄지수와 관련된 Q factor를 도출하였고 단열정보와 탄성파 속도관계식을 산출하였다. 신선한 암반의 Vp는 5,559m/s, Vs는 3,063m/s로 나타났으며 포아슨비는 0.28로 해석되었다. 이를 이용하여 동적물성치를 구하였고 초음파 텔레뷰어로 산출한 단열정보를 이용하여 단열에 따른 초동지연, 진폭변화비, 속도와의 상관성을 파악하였다. 측정된 검층공은 미세단열이 대부분이며 이러한 경암내 미세단열 지역에서는 단열틈 크기와 단열빈도가 탄성파 속도의 변수로 작용하는 것으로 나타난다.
In this paper, dynamic elastic module of banded gneiss were calculated on the basis of SPS velocity logging data obtained from a geotechnical test-hole in Pungsan-dong, Hanam, Gyeonggi Province, Korea. This study mainly focuses on the velocity analysis, Q factor calculation relative to attenuation factor, and generation of crack information and its relation with seismic velocity. As a result, P-wave and S-wave velocity of fresh hard rock was 5,559m/s and 3,063m/s, respectively, with Poisson's ratio being 0.28. With these results, dynamic modules were prepared, and crack information analyzed by acoustic televiewer was incorporated to identify the correlation among and between delay of first arrival by crack amplitude ratio, and velocity. The results of this study revealed that the analyzed logging hole mainly consisted of micro crack and a number of cracks and the size of crack aperture, functioned as a variable to seismic velocity in the micro crack area of this type of hard rock.