Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Free Vibration Analysis of Rectangular Plate with Multiple Circular Cutouts by Independent Coordinate Coupling Method

독립좌표연성법을 이용한 여러 개의 원형 구멍을 갖는 직사각형 평판의 자유진동해석

  • Published : 2007.11.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper is concerned with the vibration analysis of a rectangular plate with multiple circular holes. On the contrary to the case of rectangular plate with multiple rectangular holes, it is very difficult to perform qualitative analysis on natural vibration characteristics because of geometrical inconsistency. In this paper, we applied the Independent Coordinate Coupling Method(ICCM) to the addressed problem, which was developed to compute natural vibration characteristics of the rectangular plate with a circular hole and proven to be computationally effective. The ICCM is based on Rayleigh-Ritz method but utilizes independent coordinates for each hole domain. By matching the deflection conditions for each hole imposed on the expressions, we can easily derive the reduced mass and stiffness matrices. The resulting equation is then used for the calculation of the eigenvalue problem. The numerical results show the efficacy of the Independent Coordinate Coupling Method.

Keywords

References

  1. Monohan, L. J., Nernergut, P. J. and Maddux. G. E., 1970, 'Natural Frequencies and Mode Shapes of Plates with Interior Cut-outs', The Shock and Vibration Bulletin, Vol. 41, pp.37-49
  2. Paramasivam, P., 1973, 'Free Vibration of Square Plates with Square Opening', Journal of Sound and Vibration, Vol. 30, pp.173-178 https://doi.org/10.1016/S0022-460X(73)80111-7
  3. Ali, R. and Atwal, S. J., 1980, 'Prediction of Natural Frequencies of Vibration of Rectangular Plates with Rectangular Cutouts', Computers and Structures, Vol. 12, pp.819-823 https://doi.org/10.1016/0045-7949(80)90019-X
  4. Lam, K. Y, Hung, K. C. and Chow, S. T., 1989, 'Vibration Analysis of Plates with Cut-outs by the Modified Rayleigh-Ritz Method', Applied Acoustics, Vol. 28, pp.49-60 https://doi.org/10.1016/0003-682X(89)90030-3
  5. Bhat, R. B., 1985, 'Natural Frequencies of Rectangular Plates Using Characteristic Orthogonal Polynomials in Rayleigh-Ritz Method', Journal of Sound and Vibration, Vol. 102, pp.493-499 https://doi.org/10.1016/S0022-460X(85)80109-7
  6. Sakiyama, T., Huang, M., Matsuda, H. and Morita, C, 2003, 'Free Vibration of Orthotropic Square Plates with a Square Hole', Journal of Sound and Vibration, Vol. 259, No.1, pp.63-80 https://doi.org/10.1006/jsvi.2002.5181
  7. Leissa, A. 1993, Vibration of Plates, Acoustical Society of America
  8. Nippon Kaiii Kyokai, 1981, Guide to Ship Vibration
  9. Kwak, M. K. and Han, S., 2005, 'Free Vibration Analysis of Rectangular Plate with a Rectangular Cutout by Independent Coordinate Coupling Method', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 15, No. 12, pp, 1398-1407 https://doi.org/10.5050/KSNVN.2005.15.12.1398
  10. Kwak, M. K. and Han, S., 2006, 'Free Vibration Analysis of Simply-supported Rectangular Plate with a Circular Cutout by Independent Coordinate Coupling Method', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 16, No.6, pp.283-293. https://doi.org/10.5050/KSNVN.2006.16.6.643
  11. Kwak, M. K and Han, S., 2007, 'Free Vibration Analysis of Rectangular Plate with a Hole by means of Independent Coordinate Coupling Method', Journal of Sound and Vibration, Vol. 306, pp. 12-30 https://doi.org/10.1016/j.jsv.2007.05.041
  12. Kwak, M. K and Song, M., 2007, 'Free Vibration Analysis of Rectangular Plate with Multiple Rectangular Holes by Independent Coordinate Coupling Method', Transactions of the Korean Society for Noise and Vibration Engineering (to appear) https://doi.org/10.5050/KSNVN.2007.17.11.1086
  13. Kumai, T., 1952, 'The Flexural Vibrations of a Square Plate with a Central Circular Hole', Proc. 2nd Japan Natl. Congr. Appl, Mech., pp.339-342
  14. Hegarty, R. F. and Ariman, T., 1975, 'Elasto-dynamic Analysis of Rectangular Plates with Circular Holes', Int. J. Solids Structures, Vol. 11, pp. 895-906 https://doi.org/10.1016/0020-7683(75)90012-8
  15. Eastep, F. E. and Hemmig, F. G., 1978, 'Estimation of Fundamental Frequency of Non-circular Plates with Free, Circular Cutouts', Journal of Sound and Vibration, Vol. 56, No.2, pp. 155-165 https://doi.org/10.1016/S0022-460X(78)80011-X
  16. Nagaya, K, 1980, 'Transverse Vibration of a Rectangular Plate with an Eccentric Circular Inner Boundary', Int. J. Solids Structures, Vol. 16, pp. 1007-1016 https://doi.org/10.1016/0020-7683(80)90101-8
  17. Lee, Y. -S. and Lee, Y. -B., 1994, 'Free Vibration Analysis of 4 Edges Clamped, Isotropic Square Plates with 2 Collinear Circular Holes', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 4, No.3, pp.283-293
  18. Lee, H. S. and Kim, K C, 1984, 'Transverse Vibration of Rectangular Plates Having an Inner Cutout in Water', Journal of the Society of Naval Architects of Korea, Vol. 21, No.1, pp. 21-34