References
- Shalaby, M. A. and Younan, M. Y. A., 1999, 'Limit Loads for Pipe Elbows Subjected to In-Plane Opening Moments and Internal Pressure,' J. of Press. Ves. Tech., Vol. 121, pp. 17-23 https://doi.org/10.1115/1.2883661
- Chattopadhyay, l, 2002, 'The Effect of Internal Pressure on In-Plane Collapse Moment of Elbow,' Nucl. Eng. & Des., Vol. 212, pp. 133-144 https://doi.org/10.1016/S0029-5493(01)00468-X
- Chexal, B., Horowitz, l, Dooley, B., Millett, P., Wood, C., and Jones, R., 1998, 'Flow-Accelerated Corrosion in Power Plant,' EPRI/TR-106611-R2
- Korea Atomic Energy Research Institute, 2001, 'Development of Enhanced Safety Technology for Operating PHWR Plant,' KAERI/RR-2226/2001, Final Report
- Ahn, S. H., Nam, K. W., Yoo, Y. S., K., Ando, K., Ii, S. H., Ishiwata, M., and Hasegawa, K., 2002, 'Fracture Behavior of Straight Pipe and Elbow with Local Wall Thinning,' Nuc/. Eng. & Des., Vol. 211, pp. 91-103 https://doi.org/10.1016/S0029-5493(01)00447-2
- Kim, J. W., Kim, T. S., Park, C. Y., 2004, 'An Evaluation of The Effect of Local Wall Thinning Defect on the Collapse Moment of Elbow,' Trans. of KSME (A), Vol. 28, No.4, pp. 402-409
- Kim, J. W and Lee, J. G., 'Effect of Circumferential Location of Local Wall Thinning Defect on the Collapse Moment of Elbow,' J. of Kor. Soc. of Safety, Vol. 20, No.1, pp. 55-61
- Kim, J. W, Na, M. G., and Park, C. Y., 2005, 'Development of Failure Pressure Evaluation Model for Internally Wall Thinned Piping Components,' Trans. of KSME (A), Vol. 29, No. 7, pp. 947-954
- Hibbitt, Karlson and Sorensen Inc., 2002, 'ABAQUS ver. 6.2 User's Manual'
- Yahiaoui, K., Moffat, D. G. and Moreton, D. N., 2000, 'Piping Elbows with Cracks, Part 2: Global Finite Element and Experimental Plastic Loads Under Opening Bending,' J. Strain Anal., Vol. 35, pp. 47-57 https://doi.org/10.1243/0309324001514008
- American Society of Mechanical Engineer, ASME B&PV Code Sec. VIII, 1995 ed., 'Rules for Construction of Pressure Vessels'
- Park, B. G., Kim, Y. I, and Kim, Y. J., 2005, 'Limit Load Solutions for Pipes with Local Wall Thinning Based on Finite Element Limit Analysis,' Proc. of KSME Spring Meeting, pp. 231- 236