대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제30권10호
  • /
  • Pages.1187-1193
  • /
  • 2006
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

컴플라이언트 메커니즘 설계를 위한 바닥 보 구조 기반 조인트 강성 조절법

Ground Beam Structure Based Joint Stiffness Controlling Method for Compliant Mechanisms

  • 장강원 (군산대학교 기계공학부) ;
  • 김윤영 (서울대학교 기계항공공학부, 정밀기계설계공동연구소 멀티스케일설계연구단) ;
  • 김명진 (서울대학교 기계항공공학부)
  • 발행 : 2006.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Traditionally, the continuum-based topology optimization methods employing the SIMP technique have been used to design compliant mechanisms. Although they have been successful, the optimized mechanisms by the methods are usually difficult to manufacture because of their geometrical complexities. The objective of this study is to develop a topology optimization method that can produce easy-to-fabricate mechanism structure. The proposed method is a ground beam method where beam connectivity is controlled by the beam joint stiffness. In this approach, beam joint stiffness determines the mechanism configuration. Because b the ground structure beams have uniform thicknesses varying only discretely, the resulting mechanism topologies become easily manufacturable.

키워드

참고문헌

  1. Bendsoe, M. P. and Kikuchi, N., 1988, 'Generating Optimal Topologies in Structural Design Using a Homogenization Method,' Comput. Meth. Appl. Mech. Engng. Vol. 71, pp. 197-224 https://doi.org/10.1016/0045-7825(88)90086-2
  2. Diaz, A. R. and Kikuchi, N., 1992, 'Solutions to Shape and Topology Eigenvalue Optimization Problems using a Homogenization Method,' Int. J. Numer. Meth. Engng. Vol. 35, pp. 1487-1502 https://doi.org/10.1002/nme.1620350707
  3. Bendses, M.P. and Sigmund, O., 2003, Topology Optimization, Springer, New York
  4. Sigmund, O. and Petersson, J., 1998, 'Numerical Instabilities in Topology Optimization: A Survey on Procedures Dealing with Checkerboards, Meshand Local Minima,' Structural Optimization, Vol. 16, pp. 68-75 https://doi.org/10.1007/BF01214002
  5. Ben-Tal A. and Bendsoe, M. P. 1993, 'A New Method for Optimal Truss Topology Design,' SIAM Journal on optimization, Vol. 3 No.2, pp. 322-358 https://doi.org/10.1137/0803015
  6. Yoon, G. H. and Kim, Y. Y., 2005, 'Element Connectivity Parameterization for Topology Optimization of Geometrically Nonlinear Structures,' International Journal of Solids and Structures, Vol. 42, No.7, pp. 1983-2009 https://doi.org/10.1016/j.ijsolstr.2004.09.005
  7. Jang, G. W., Kim, Y. Y. Choi, K. K., and Kim, M. J., 2005, 'Structural Layout Optimization Strategy Considering Assemblage and Discrete Cross-Sectional Dimensions,' Trans of KSME(S)
  8. Vol Bendsoe M. P. Sigmund O .. , 1998, 'Material Interpolation Schemes in Topology Optimization,' Archive of Applied Mechanics : Ingenieur-Archiv, Vol. 69 No. 9/10, pp.635-654 https://doi.org/10.1007/s004190050248
  9. Sigmund O., 1997,'On the Design of Compliant Mechanisms Using Topology Optimization,' Mechanics of Structures and Machines, Vol. 25 No.4, pp.493-524 https://doi.org/10.1080/08905459708945415
  10. Stegmann J, Lund E., 2005, 'Discrete Material Optimization of General Composite Shell Structures,' International Journal for Numerical Methods in Engineering, Vol. 62, pp. 2009-2027 https://doi.org/10.1002/nme.1259