Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Adhesion Properties of Arc PVD Coatings on Non-Nitrided and Nitrided Various Substrates

모재의 재질 및 질화층 형성에 따른 Arc PVD 코팅의 접합특성 평가

  • 이정민 (부산대학교 대학원 정밀기계공학과) ;
  • 전성진 (부산대학교 대학원 정밀기계공학과) ;
  • 고대철 (부산대학교 ILIC) ;
  • 김병민 (부산대학교 정밀정형 및 금형가공연구소)
  • Published : 2006.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper was designed to assess the adhesive properties of hard coatings on non-nitrided and nitrided various tool steels. Estimations of adhesion were done to scratch test which is mainly used in hard coating. The critical load$(L_c)$ between coating and substrate is defined through analysis of frictional load vs. normal load curve, signals of acoustic emission and optical observations. Coatings employed in this study are TiN, CrN and TiAlN, tools as substrates are STD11, STD61 and SKH51. It was classified to substrates with/without intermediate nitrided layer and hard coatings on substrate were deposited by arc PVD. Results showed that harder substrates and coatings give higher values of critical loads.

Keywords

References

  1. Beag, C. H., 2002, 'Microstructure and Mechanical Properties of TiN-Base Thin Films,' Doctoral Dissertation(Chungbuk univ.)
  2. Bull, S. J., 1997, 'Failure Mode Maps in the Thin Film Scratch Adhesion Test,' Tribology International, Vol. 30, No.7, pp. 491-498 https://doi.org/10.1016/S0301-679X(97)00012-1
  3. Liu, Y. M., Li, L., Cai, X., Chen, Q. L., Xu, M., Hu, Y., Cheung, T. L., Shek, C. H., Chu, P. K., 2005, 'Effects of Pretreatment by Ion Implantation and Interlayer on Adhesion Between Aluminum Substrate and TiN Film,' Thin Solid Films, 493, pp. 152-159 https://doi.org/10.1016/j.tsf.2005.06.045
  4. Burnett, P. J. and Rickerby, D. S., 1987, 'The Mechanical Properties of Wear-Resistant Coatings: I: Modelling of Hardness Behavior,' Thin Solid Films, 148-30, pp. 41-50 https://doi.org/10.1016/0040-6090(87)90119-2
  5. Shin, H. J., Won, J. Y. and Beag, C. H., 2002, 'Change of Preferred Orientation in TiN Thin Films Grown by Ultrahigh Vacuum Reactive Ion Beam Assisted Deposition,' Nuclear Instruments and Methods in Physics Research B, 190, pp. 802-812 https://doi.org/10.1016/S0168-583X(01)01246-0
  6. Cho, Y. H., Oh, S. M. and Rhee, B. G, 1998, 'A Study on Wear Characteristic Ceramics Coating with PVD,' Transitions of the KSME A, Vol. 22, No.7, pp. 1229-1236
  7. Bienk, E. J., Reitz, H., Mikklesen, N. J., 1995, 'Wear and Friction Properties of Hard PVD Coatings,' Surface & Coatings tech., 76-77, pp. 475-480 https://doi.org/10.1016/0257-8972(95)02498-0
  8. Kamminga, J. D., Hoy, R., Janssen, G C. A. M., Lugsheider, E. and Maes, M., 2003, 'First Results on Duplex Coatings Without Intermediate Mechnical Treatment,' Surface & Coatings Tech., 174-175, pp. 671-676 https://doi.org/10.1016/S0257-8972(03)00578-4
  9. Bellido-Gonzalez, V., Stefanopoulos, N. and Deguilhen, E, 1995, 'Friction Monitored Scratch Adhesion Testing,' Surface & Coatings Tech., 74-75, pp. 884-889 https://doi.org/10.1016/0257-8972(95)08315-4
  10. Kamminga, J. D., Alkemade, P. E A. and Janssen, G C. A. M., 2004, 'Scratch Test Analysis of Coated and Uncoated Nitrided Steel,' Surface & Coatings Tech., 177-178,pp.284-288 https://doi.org/10.1016/j.surfcoat.2003.09.006
  11. Dyrda, K. and Sayer, M.,1999, 'Critical Loads and Effective Frictional Force Measurements in the Industrial Scratch Testing of TiN on M2 Tool Steel,' Thin Solid Films, 355-356, pp. 277-283 https://doi.org/10.1016/S0040-6090(99)00450-2
  12. Arai, T., Fujita, H. and Watanabe, M., 1987, 'Evaluation of Adhesion Strength of Thin Hard Coatings,' Thin Solid Films, 154-12, pp. 387-401 https://doi.org/10.1016/0040-6090(87)90381-6
  13. Wu, Fan-bean and Duh, Jenq-gong, 2002, 'Scratch Behavior and in Situ Acoustic Emission Analysis of PVD Chromium Nitride Coatings on Mild Steel with Electroless Nickel Interlayers,' Surface & Coatings Tech., 162, pp. 106-112 https://doi.org/10.1016/S0257-8972(02)00562-5