References
- Bugini, A., Maccarini, G and Giardini, C., 1993, 'The Evaluation of Flow Stress and Friction in Upsetting of Rings and Cylinders,' Annals of the CIRP., Vol. 42, No.1, pp. 335-338 https://doi.org/10.1016/S0007-8506(07)62456-1
- Lee, C. H. and Altan, T., 1972, 'Influence of Flow Stress and Friction upon Metal Flow in Upset Forging of Ring and Cylinders,' ASME. Transactions. J. of Engr.for Industry., p. 775
- Kim, N. S. and Kim, H. J., 2002, 'Metal Forming and Analysis,' 2002, Press. of Mun-Un Dang, pp. 136-144
- Hwu, Y. J., Hsu, C. T. and Wang, F., 1993, 'Measurement of Friction and the Flow Stress of Steels at Room and Elevated Temperatures by Ring Compression Tests,' J. Mater. Process. Technol., Vol. 37, No. 1, pp. 319-335 https://doi.org/10.1016/0924-0136(93)90099-R
- Rao, K. P. and Xu, W. L., 1995, 'Neural Evaluation of Friction and Flow Stress Adaptive to Ring Geometry,' JSME. International. Journal. Series A., Vol. 38, No.4, pp. 506-514
- Xu, W. L., Rao, K. P., Watanabe, T. and Hua, M., 1994, 'Analysis of Ring Compression Using Artificial Neural Network,' J. Mater. Process. Technol., Vol. 44, No. 3, pp. 301-308 https://doi.org/10.1016/0924-0136(94)90443-X
- Osakada, K., Kawasaki, T., Mori, K. and Taniguchi, N., 1981, 'Method of Determining Flow Stress under Forming Conditions,' Annals of the CIRP., Vol. 30, No. 1, pp. 135-138 https://doi.org/10.1016/S0007-8506(07)60910-X
- Choi, Y. M. and Kim, N. S. 1994, 'Determination of Flow Stress and Friction Factor by the Ring Compression Test (II),' Journal of the KSTP., Vol. 3, No.2, pp. 215-226
- Choi, Y., Kim, H. K., Cho, H. Y., Kim, B. M. and Choi, J. C., 1998, 'A Method of Determining Flow Stress and Friction Factor Using an Inverse Analysis in Ring Compression Test,' Journal of KSTP., Vol. 22, No.3, pp. 483-492
- Altan, T., Ngaile, G and Shen, G, 2005, 'Cold and Hot Forging, Fundamentals and Application,' ASM International, pp. 25-49, 67-89
- Altan, T., 2004, 'Material Properties and Cold Forging Lubricants,' Prepared for 2nd Cold and Warm Precision Forging Workshop
- Altan, T. and Cho, H. J., 2003, 'Simultaneous Determination of Flow Stress and Interface Friction by Finite Element Based Inverse Analysis,' Prepared for 53rd CIRP General Assembly
- Altan, T. and Cho, H. J., 2003, 'Determination of Flow Stress and Interface Friction at Elevated Temperatures by Inverse Analysis Technique,' J. Mater. Process. Technol., Vol. 170, pp. 64-70 https://doi.org/10.1016/j.jmatprotec.2005.04.091
- Ebrahimi, R. and Najafizadeh, A., 2004, 'A New Method for Evaluation of Friction in Bulk Metal Forming,' J. Mater. Process. Technol., Vol. 152, pp. 136-143 https://doi.org/10.1016/j.jmatprotec.2004.03.029
- Lin, S. Y. and Lin, F. C., 2003, 'Prediction of Fold Defect in Barreling F orrnations of Cylinder upsetting,' Finite Elements in Analysis and Design., Vol. 39, pp. 325-341 https://doi.org/10.1016/S0168-874X(02)00076-8
- Lin, S. Y. and Lin, F. C., 2003, 'Influences of the Geometrical Conditions of Die and Workpiece on the Barreling Formation during Forging-Extrusion Process,' J. Mater. Process. Technol., Vol. 140, pp. 54-58 https://doi.org/10.1016/S0924-0136(03)00728-3
- Ma, X., Barnett, M. R. and Kim, Y. H., 2003, 'Experimental and Theoretical Investigation of Compression of a Cylinder using a Rotating Platen,' International Journal of Mechanical Sciences., Vol. 45 pp. 1717-1737 https://doi.org/10.1016/j.ijmecsci.2003.12.003
- Kulkarni, K. M. and Kalpakjian, S., 1969, 'A Study of Barreling as an Example of Free Deformation in Plastic Working,' Journal of Engineering for Industry., pp. 743-754
- Schey, J. A., Venner, T. R. and Takornana, S. L., 1982, 'Shape Changes in the Upsetting of Slender Cylinders,' Journal of Engineering for Industry., Vol. 104, pp. 79-83 https://doi.org/10.1115/1.3185802
- Banerjee, J. K., 1985, 'Barreling of Solid Cylinders under Axial Compression,' Transactions of the ASME., Vol. 107, pp. 138-144 https://doi.org/10.1115/1.3260990
- Chen, F. K. and Chen, C. J., 2000, 'On the Nonuniform Deformation of the Cylinder Compression Test,' Transactions of the ASME., Vol. 122, pp. 192-197 https://doi.org/10.1115/1.482786
- Narayanasamy, R., Murthy, R. S. N., Viswanatham, K. and Chary, G. R., 1988, 'Prediction of the Barreling of Solid Cylinders under Uniaxial Compressive Load,' Journal of Mechanical Working Technology., Vol. 16, pp. 21-30 https://doi.org/10.1016/0378-3804(88)90136-2
- Narayanasamy, R. and Pandey, K. S., 1997, 'Phenomenon of Barrelling in Aluminium Solid Cylinders during Cold Upset Forming,' J. Mater. Process. Technol., Vol. 70, pp. 17-21 https://doi.org/10.1016/S0924-0136(97)00035-6
- Narayanasamy, R., Sathiyanarayanan, S. and Ponalagusamy, R., 2000, 'A Study on Barrelling in Magnesium Alloy Solid Cylinders during Cold Upset Forming,' J. Mater. Process. Technol., Vol. 101, pp. 64-69 https://doi.org/10.1016/S0924-0136(99)00473-2
- Malayappan, S. and Narayanasamy, R., 2004, 'An Experimental Analysis of Upset Forging of Aluminium Cylindrical Billets Considering the Dissimilar Frictional Conditions at Flat Die Surfaces,' Int. J. Adv. Manuf. Technol., Vol. 23, pp. 636-643 https://doi.org/10.1007/s00170-003-1584-3
- Kalpakjian, S., 1991, 'Manufacturing Processes for Engineering Materials,' Press of Addison-Wesley, pp. 166-188
- DEFORM 2D, version 8.0, 'DEFORM 2D version 8.0 user's manual
- Narayanasamy, R., and Ponalagusamy, R., 'Cold Forging,' Unpublished Report. Regional Engineering College. Tiruchirappalli. 620015. India
- Kim, T. J. and Kim, N. S., 2003, 'Determination of Material Properties of Tube using Inverse Engineering and Analytic Method in Tube Bulge Test,' Journal of KSTP., Vol. 27, No.9, pp. 1508-1516
- Arora, J. S., 1989, 'Introduction to Optimum Design,' McGraw-Hill. Inc., pp. 287-304, 316-319
- DEFORM 3D, version 5.0, 'DEFORM 3D version 5.0 user's manual