Journal of Mechanical Science and Technology

  • 제20권9호
  • /
  • Pages.1361-1370
  • /
  • 2006
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Structural Design of a Cathode-ray Tube (CRT) to Improve its Mechanical Shockproof Character

  • Park, Sang-Hu (Department of Mechanical Engineering, KAIST) ;
  • Kim, Won-Jin (School of Mechanical and Automotive Engineering, Keimyung University)
  • 발행 : 2006.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An electronic beam mis-landing phenomenon on the RGB (red/green/blue) -fluorescent surface has been considered as one of serious problems to be solved in cathode-ray tube (CRT), which is generally caused by mechanical shock and vibration. In this work, structural design concepts on the major parts of the CRT, such as a frame, a shadow mask, and a spring, are studied to improve the mechanical shockproof character of a CRT by FEM-analyses and experimental approaches ; a frame is newly designed to have strength employing the double-corner-beads which reduces considerably the distortion of the frame and the shadow mask : the edge-bead of a shadow-mask is redesigned to maintain the wide curved surface of a shadow-mask after mechanical shock : finally, a spring supporting the frame and the shadow-mask is designed to have enough flexibility along drop-direction. As an example, a conventional type of a 15inch CRT was utilized to demonstrate the feasibility and usefulness of this work. Overall, some favorable information on the structural design of the CRT is achieved, and the mechanical shockproof character of a 15-inch CRT is improved in the degree of 3G $(1G=9.81m/s^2)$ as an average-value.

키워드

참고문헌

  1. ASTM Code D3323-93 and D4169, 2000, ASTM Testing Standards, (American Society for Testing and Materials, Philadelphia, Pennsylvania)
  2. Baik, S. C., Oh, K. H., and Lee, D. N., 1996, 'Analysis of the Deformation of a Perforated Sheet Under Uni-axial Tension,' J. Mater. Proc. Techn., 58, pp. 139-144 https://doi.org/10.1016/0924-0136(95)02096-9
  3. Ha, K., Kim, D. and In, J., 2000, 'Prediction of CRT Shock Test and Design Improvement for Shock Resistance,' Int. Conf. of SID, Long Beach/CA/USA, pp. 952-955 https://doi.org/10.1889/1.1833113
  4. I-DEAS 10 NX Series User's Manuals, 2004, (EDS)
  5. Kim, H. G. and Im, S. Y., 1993, 'Analysis of Beam Landing Shifts due to Thermal Deformation of a Shadow Mask,' IEEE Transaction on Consumer Electronics, 40, pp. 47-54 https://doi.org/10.1109/30.273651
  6. Kim, K. W., Kim, N. W. and Kang, D. J., 1998, 'Analysis of Shadow-mask Thermal Deformation and Prediction of Beam Landing Shifts for Color CRT,' IEEE Trans. on Consumer Electronics, 44, pp.442-448 https://doi.org/10.1109/30.681963
  7. Kim, S. D. and Park, S. H., 2003, 'Frame for Color Cathode-ray Tube,' US Patent, No. US6.577.049
  8. Kim, S. D., 2003, 'Nonlinear Vibration Analysis of Thin Perforated Sheet with Wire Impact Damping,' Ph.D. Thesis (Korea Advanced Institute of Science & Technology)
  9. Kim, S. D., Kim, S. G., Seo, J. W. and Jeong, B. K., 2000, 'Frame Structure for a Cathode-ray Tube,' US Patent, No. US5.698.938.25
  10. Kim, S. D., Kim, W. J. and Lee, C. W., 2003, 'Vibration Analysis of the Tension Shadow Mask with Wire Impact Damping,' J. Sound and Vibration, 256, pp. 1003-1023 https://doi.org/10.1016/S0022-460X(02)01241-5
  11. Pam-Crash User's Manuals, 2004, (ESI Group)
  12. Ueyama, T., Kanai, H., Hirai, R. and Yano, T., 1989, 'Improved Computer Simulation Method for Shadow-mask Thermal Deformation and Beam Shift,' Japan Display, 89, pp. 558-561
  13. You, S. J., Shin, W. S. and Jang, B. W., 2000, 'An Analysis of a Mask Vibration Considering Contact with a Damping Wire,' IEEE Transactions on Consumer Electronics, 46, pp. 385-389 https://doi.org/10.1109/30.846674