References
- Bindon, J. P., 1989, 'The Measurement and Ormation of Tip Clearance,' ASME Journal of Turbomachinery, Vol. 111, pp. 257-263 https://doi.org/10.1115/1.3262264
- Yamamoto, A., 1989, 'Endwall Flow/Loss Mechanism in a Linear Turbine Cascade With Blade Tip Clearance, ' ASME Journal of Turbomachinery, Vol. 111, pp. 264-274 https://doi.org/10.1115/1.3262265
- Heyes, F. J. G., Hodson, H. P. and Dailey, G. M., 1992, 'The Effect of Blade Geometry on the Tip Leakage Flow in Axial Turbine Cascades,' ASME Journal of Turbomachinery, Vol. 114, pp. 643-651 https://doi.org/10.1115/1.2929188
- Bindon, J. P. and Morphis, G., 1992, 'The Development of Axial Turbine Leakage Loss for Two Profiled Tip Geometry Using Linear Cascade Data,' ASME Journal of Turbomachinery, Vol. 114, pp. 198-203 https://doi.org/10.1115/1.2927985
- Xiao, X., McCarter, A. A. and Lakshminarayana, B., 2001, 'Tip Clearance Effects in a Turbine Rotor: Part I - Pressure Field and Loss,' ASME Journal of Turbomachinery, Vol. 123, pp. 296-304 https://doi.org/10.1115/1.1368365
- McCarter, A. A., Xiao, X. and Lakshminarayana, B., 2001, 'Tip Clearance Effects in a Turbine Rotor: Part II - Velocity Field and Flow Physics,' ASME Journal of Turbomachinery, Vol. 123, pp. 305-313 https://doi.org/10.1115/1.1368880
- Tallman, J. and Lakshminarayana, B., 2002, 'Numerical Simulation of Tip Leakage Flows in Axial Flow Turbines, With Emphasis on Flow Physics: Part I - Effect of Tip Clearance Height,' ASME Journal of Turbomachinery, Vol. 123, pp. 314-323 https://doi.org/10.1115/1.1368881
- Tallman, J. and Lakshminarayana, B., 2002, 'Numerical Simulation of Tip Leakage Flows in Axial Flow Turbines, With Emphasis on Flow Physics: Part II - Effect of Outer Casing Relative Motion,' ASME Journal of Turbomachinery, Vol. 123, pp. 324-333 https://doi.org/10.1115/1.1369113
- Ameri, A. A., Steinthorsson, E. and Rigby, L. D., 1998, 'Effects of Squealer Tip on Rotor Heat Transfer and Efficiency,' ASME Journal of Turbomachinery, Vol. 120, pp. 753-759 https://doi.org/10.1115/1.2841786
- Jae Su Kwak and Han, J. C., 2003, 'Heat Transfer Coefficients and Film Cooling Effectiveness on the Squealer Tip of a Gas Turbine Balde,' ASME Journal of Turbomachinery, Vol. 125, pp. 648-657 https://doi.org/10.1115/1.1622712
- Jun, S. B., 2000, Measurements of Endwall Heat(Mass) Transfer Coefficient in a Linear Turbine Cascade Using Naphthalene Sublimation Technique, MS thesis, Kumoh National Institute of Technology
- Treaster, A. L. and Yocum, A. M., 1979, 'The Calibration and Application of Five-Hole probes,' ISA Transactions, Vol. 18, pp. 23-34
- Abernethy, R. B., Benedict, R. P. and Dowdell, R. B., 1985, 'ASME Measurement Uncertainty,' ASME Journal of Fluids Engineering, Vol. 107, pp. 161-164 https://doi.org/10.1115/1.3242450