참고문헌
- 김원범, 1997, '강재의 해수환경중에서의 피로 강도평가에 관한 연구,' 히로시마대학 박사학위논문 (일본어)
- 김제동, 이종원, 홍창호, 1996, '복수표면균열을 갖는 구조요소의 피로수명예측,' 대한조선학회 논문집, 제 33권, 제 4호, pp. 75-86
- 김창욱, 노인식, 반헌호, 신병천, 2001a, '균열계폐구 거동을 고려한 피로균열전파해석모델의 개발: 균열계폐구거동의 모형화,' 대한조선학회 논문집, 제 38권, 제 3호, pp. 74-83
- 김창욱, 노인식, 도관수, 신병천, 2001b, '균열계폐구 거동을 고려한 피로균열전파해석모델의 개발: 수치계산,' 대한조선학회 논문집, 제 38권, 제 3호, pp. 84-92
- 김창욱, 노인식, 김대수, 2002a, '균열전파해석에 의한 선체의 피로수명평가법- 응력강도계수의 간이추정법-,' 대한조선학회 논문집, 제 39권, 제 1호, pp. 90-99
- 김창욱, 노인식, 도관수, 2002b, '등가분포응력을 이용한 피로균열전파해석에 관한 연구', 대한조선학회 논문집, 제 39권, 제 2호, pp. 61-68
- 노인식, 임채환, 1998, '경계요소-유한요소 혼합법에 의한 균열선단의 응력강도계수 계산 (제 1 보),' 대한조선학회 논문집, 제 35권, 제 4호, pp. 38-45
- 전유철, 김유일, 강중규, 한종만, 2001, '피로실험 및 균열진전해석을 통한 용접부의 피로수명 예측에 관한 연구,' 대한조선학회 논문집, 제 38권, 제 3호, pp. 61-68
- Frost, N.E., 1959, 'A Relation Between the Critical Alternating Propagation Stress and Crack Length for Mild Steel,' Proc. Instn. Mech, Engrs, Vol. 173, No.35, pp. 811-827
- Fujimoto, Y., Kim, W.B., Shintaku, E. and Huang, F., 1998, 'Inherent Damage Zone Model for Fatigue Strength Evaluation,' Journal of The Society of Naval Architects of Japan, Vol. 184, pp. 315-323
- Fujimoto, Y., Hamada, K. and Kim, W.B., 1999, 'Inherent Damage Zone Model for Strength Evaluation of Small Fatigue Cracks,' Proc. of the 13th Asian Technical Exchange and Advisory Meeting on Marine Structures, Keelung Taiwan, pp. 223-232
- Fujimoto, Y., Hamada, K., Shintaku, E. and Pirker, G., 2001, 'Inherent Damage Zone Model for Strength Evaluation of Small Fatigue Cracks,' Engineering Fracture Mechanics, Vol. 68, pp. 455-473 https://doi.org/10.1016/S0013-7944(00)00116-8
- Haddad, M.H.El, Topper, T.H. and Smith, K.N., 1979, 'Prediction of Non Propagating Cracks,' Engineering Fracture Mechanics, Vol. 11, pp. 573-584 https://doi.org/10.1016/0013-7944(79)90081-X
- Huang, Y. and Stein, E., 1996, 'Shakedown of a Cracked Body Consisting of Kinematic Hardening Material,' Engineering Fracture Mechanics, Vol. 54, No.1, pp.107-112 https://doi.org/10.1016/0013-7944(95)00119-0
- Ishibashi, T., 1967, Metal Fatigue and Prevent Ion of Fracture, Youkendou, pp. 59(in Japanese)
- Kim, W.B., 1998, 'Intrinsic Damage Zone Model for Fatigue Strength Evaluation,' Procee Dings of Symposium at Venture Business Laboratory, Hiroshima University, pp. 19-20(in Japanese)
- Kitagawa, H. and Takahashi, S., 1976, 'Applicability of Fracture Mechanics to Very Small Cracks or the Cracks in the Early Stage,' Proc. 2nd Int. Conf. on Mechanical Behaviour of Materials, pp. 627-631
- Lindley, T., Mcintyre, P. and Trant, P.J., 1982, 'Fatigue Crack Initiation at Corrosion Pits,' Metal Technology, Vol. 9, pp. 135-142 https://doi.org/10.1179/030716982803286403
- Morita, K., Kajimoto, K., Murai, R., Fujii, M. and Shimogouchi H., 1991, 'Effect of Flaws on Fatigue Strength of Cast or Forged Materials,' Journal of The Society of Naval Architects of Japan, Vol. 170, pp. 745-753(in Japanese)
- Neuber, H., 1937, Kerbspannungslehre, Verlag Von Julius Springer, Berlin, pp. 50 & pp. 149(in German)
- Nishitani, H., 1983, 'Measure of Stress Field in a Notch Corresponding to Stress Intensity Factor in a Crack,' Transaction of Japan Society of Mechanical Engineers, Vol. 48, No. 447, pp. 1353-1359
- Okamura, H., 1976, Introduction of Linear Fracture Mechanics, Baihukan (in Japanese)
- Tanaka, K., Nakai, Y., and Yamashita, M., 1981, 'Fatigue Growth Threshold of Small Cracks,' Int. J. of Fracture, Vol. 17, No.5, pp. 519-533
- Tanaka, K., 'The Propagation of Small Fatigue Cracks,' 1984, J. Soc. Mater. Sci., Vol. 33, No. 371, pp. 961-972(in Japanese) https://doi.org/10.2472/jsms.33.961
- Society of Materials Science, 1978, Design Handbook of Metallic Materials, Youkendou, pp. 62 (in Japanese)
- Yokobori, T., Ishibashi, T. and Utoguchi, H., 1964, 'Strength and Fracture of Metallic Materials,' The Japan Institute of Metals, Maruzen, pp. 306 (in Japanese)