DOI QR코드

DOI QR Code

Design of Propeller Geometry Using Blade Sections Adapted to Surface Streamlines

표면 유선에 정렬된 날개 단면을 이용한 프로펠러 형상 설계

  • Kim, Yoo-Chul (Department of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Kim, Tae-Wan (Department of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Suh, Jung-Chun (Department of Naval Architecture and Ocean Engineering, Seoul National University)
  • 김유철 (서울대학교 조선해양공학과) ;
  • 김태완 (서울대학교 조선해양공학과) ;
  • 서정천 (서울대학교 조선해양공학과)
  • Published : 2006.08.01

Abstract

In this paper, we suggest a design concept of defining the propeller geometry by stacking up the blade sections aligned with propeller surface streamlines. Numerical and experimental propeller open water(P.O.W.) characteristics of a newly designed propeller are presented. The surface streamlines for a propeller are obtained by using the panel method. Redefinition of the blade sections aligned with the streamlines is provided together with 8-spline modeling, by which we manufacture model propellers. We carried out the P.O.W, tests in a towing tank in order to show the effect of the present method on P.O.W. characteristics.

Keywords

References

  1. 김광, 표상우, 서정천, 1999, '정상 및 비정상 유동중 덕트 프로펠러 성능해석,' 대한조선학회 논문집, 제 36권, 제 1호, pp. 30-36
  2. 김영기, 이진태, 이창섭, 서정천, 1993, '포텐셜을 기저로한 패널법에 의한 프로펠러의 정상 성능 해석,' 대한조선학회 논문집, 제 30권, 제 1호, pp. 73-86
  3. 김유철, 서정천, 김태환, 2005, '프로펠러 정삭을 위한 gouging 이 없는 공구 경로 생성,' 대한조선학회 추계학술대회, pp. 263-274
  4. 김유철, 2006, 표면 유선에 정렬된 날개 단면을 이용한 프로펠러 형상 설계, 박사학위논문, 서울대학교
  5. 신현경, 박규원, 1991, 'Open 균열 B-spline 곡면을 이용한 선체 곡면 표현에 관한 연구,' 대한조선학회 논문집, 제 28권, 제 2호, pp. 21-27
  6. 윤병로, 서승완, 김원돈, 김광욱, 1985, 'B-spline 을 이용한 선체 표면의 표현에 관한 연구,' 대한조선학회 논문집, 제 22권, 제 3호, pp. 19-26
  7. Abbott, I.H. and Doenhoff, A.E.V., 1959, Theory of Wing Sections, Dover Publications, Inc
  8. Carlton, J.S., 1994, Marine Propellers and Propulsion, Butterworth Heinemann
  9. Farin, G. and Hansford, D., 2000, The Essentials of CAGD, Ak Peters
  10. Hoschek, J. and Lasser, D., 1993, Fundamentals of Computer Aided Geometric Design, Ak Peters
  11. Kerwin, J.E. and Lee, C.S., 1978, 'Prediction of Steady and Unsteady Marine Propeller Performance by Numerical Lifting-Surface Theory,' SNAME Transactions, Vol. 86, pp. 218-253
  12. Pyo, S.W., 1995, Numerical Modeling of Propeller Tip Flows with Wake Sheet Roll-Up in Three Dimensions, PhD. Thesis, Massachusetts Institute of Technology