Journal of Mechanical Science and Technology

  • 제20권8호
  • /
  • Pages.1217-1223
  • /
  • 2006
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Analysis of the Induction Heating for Moving Inductor Coil

  • Yun J.O. (Department of Mechanical Engineering, College of Engineering, Chonnam National University) ;
  • Yang Young-Soo (Department of Mechanical Engineering, College of Engineering, Chonnam National University)
  • 발행 : 2006.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Induction heating is a process that is accompanied with magnetic and thermal situation. This paper presents a simulation of a magneto-thermal coupled problem of an induction heating process for moving inductor coil. In the magnetic and thermal analyses, temperature-dependent magnetic and thermal material properties were considered. As the inductor coil moves in the process, solution domains corresponding to inductor changes into those of the air, and the solution domains of air change into those of the inductor. For these reasons, modeling of induction heating process is very difficult with general purpose commercial programs. In this paper, induction heating process for moving coil was simulated with the concept of traveling the position of the heating planes. Finite element program was developed and finite element results were compared with the experimental results.

키워드

참고문헌

  1. Chaboudez, C., Clain, S., Glardon, R., Mari, D., Rappaz, J. and Swierkosz, M., 1997, 'Numerical Modeling in Induction Heating for Axisymmetric Geometries,' IEEE Transactions on Magnetics, Vol. 33, pp. 739-745 https://doi.org/10.1109/20.560107
  2. Enokizono, M. and Tanabe, H., 1995, 'Numerical Analysis of High-Frequency Induction Heating Including Temperature Dependence of Material Characteristics,' IEEE Transactions on Magnetics, Vol. 31, pp. 2438-2444 https://doi.org/10.1109/20.390154
  3. Garbulsky, G. D., Marino, P. and Pignotti, A., 1997, 'Numerical Model of Induction Heating of Steel-Tube Ends,' IEEE Transactions on Magnetics, Vol. 33, pp. 746-752 https://doi.org/10.1109/20.560108
  4. Gong, L., Hagel, R. and Unbehauen, R., 1995, 'A New Approach to the Nonlinear Eddy Current Field Coupled to the Nonlinear Heat Transfer,' IEEE Transcations on Industry Applications, Vol. 31, pp.733-736 https://doi.org/10.1109/28.395281
  5. Huebner, K. H., Thornton, E. A. and Byrom, T. G., 1995, The Finite Element Method for Engineers, A Wiley- Interscience Publication
  6. Masubuchi, K., 1980, Analysis of Welded Structures, Pergamon Press
  7. Nerg, J. and Partanen, J., 2000, 'Numerical Solution of 2D and 3D Induction Heating Problems with Non-Linear Material properties Taken into Account,' IEEE Transactions on Magnetics, Vol. 36, pp. 3119-3121 https://doi.org/10.1109/20.908705
  8. Sadeghipour, K., Dopkin, J. A. and Li, K., 1996, 'A Computer Aided Finite Element/Experimental Analysis of Induction Heating Process of Steel,' Computers in Industry, Vol. 28, pp.195-205 https://doi.org/10.1016/0166-3615(95)00072-0
  9. Son, K. L, Yang, Y. -So and Beom, H. G., 2000, 'Analysis of Angular Distortion in Weldments Using Laminated Plate Theory,' Science and Technology of Welding and Joining, Vol. 5, pp.245-249 https://doi.org/10.1179/136217100101538272
  10. Wu, H. W. and Chiu, C. P., 1988, 'A Study on the Characteristics of Heat Transfer in an Engine Piston,' Journal of Mechanical Science and Technology, Vol. 2, pp. 19-27