DOI QR코드

DOI QR Code

비틀림 하중을 받는 복합재료 튜브형 접합부의 비선형 해석

Nonlinear Analysis of Adhesive Tubular Joints with Composite Adherends subject to Torsion

  • 오제훈 (한양대학교 기계정보경영공학부)
  • 발행 : 2006.06.01

초록

섬유강화 복합재료는 적층각도와 적층순서에 따라 이방성을 가지기 때문에, 복합재료가 튜브형 접합부의 피접착체로 사용될 경우 지금까지 많이 수행된 등방성 피접착체를 가지는 접합부에 대한 해석을 통하여 복합재료 접합부의 거동을 예측하는 것은 한계가 있다. 본 연구에서는 접착제의 비선형 거동을 고려하여 복합재료 피접착체를 가지는 튜브형 접합부에 대한 비선형 해석을 수행하였다. 먼저 적층 복합재료 튜브에 대한 해석을 수행하였고, 이를 바탕으로 튜브형 접합부에 대한 비선형 방정식을 유도하였으며, 접착층의 응력 분포 및 접합부의 토크전달능력을 계산하였다. 복합재료 튜브의 적층순서와 접착길이가 접착층의 응력 분포 및 토크전달능력에 어떤 영향을 미치는 지 살펴보았으며, 또한 비선형 해석과 선형해석의 차이점을 비교하고 분석하였다.

Since composite materials have anisotropic properties that depend on their stacking angle and sequence, the analysis of joints with isotropic adherends is limited in describing the behavior of the adhesive Joint with composite adherends. In this study, the nonlinear solution for adhesive joints with composite adherends was derived by incorporating the nonlinear behavior of the adhesive into the analysis. The behavior of the laminated composite tube was first analyzed, and the stress distributions of the composite tubular adhesive joint were calculated by including the nonlinear properties of the adhesive. The effect of the stacking sequence of composite adherends and bonding length on torque capacities of joints was examined, and results of the nonlinear analysis were also compared with those of the linear analysis.

키워드

참고문헌

  1. Adams, R.D., and Peppiatt, N.A., 'Stress Analysis of Adhesive Bonded Tubular Lap Joints,' J. Adhesion, Vol. 9, 1977, pp. 1-18 https://doi.org/10.1080/00218467708075095
  2. Alwar, R.S., and Nagaraja, YR., 'Viscoelastic Analysis of an Adhesive Tubular Joint,' J. Adhesion, Vol. 8, 1976, pp. 79-92 https://doi.org/10.1080/00218467608075072
  3. Lee, D.G., Kim, K.S., and Lim, Y.T., 'An Experimental Study of Fatigue Strength for Adhesively Bonded Tubular Single Lap Joints,' J. Adhesion, Vol. 35, 1991, pp. 39-53 https://doi.org/10.1080/00218469108030434
  4. Lee, S.J., and Lee, D.G., 'Development of a Failure Model for the Adhesively Bonded Tubular Single Lap Joint,' J. Adhesion, Vol. 40, 1992, pp. 1-14 https://doi.org/10.1080/00218469208030467
  5. Lee, S.J., and Lee, D.G., 'Optimal Design of the Adhesively Bonded Tubular Single Lap Joint,' J. Adhesion, Vol. 50, 1995, pp. 165-180 https://doi.org/10.1080/00218469508014364
  6. Choi, J.H., and Lee, D.G., 'The Torque Transmission Capabilities of the Adhesively Bonded Tubular single Lap Joint and the Double Lap Joint,' J. Adhesion, Vol. 44, 1994, pp. 197-212 https://doi.org/10.1080/00218469408027077
  7. Lee, S.J., and Lee, D.G., 'A Closed-form Solution for the Torque Transmission Capability of the Adhesively Bonded Tubular Double Lap Joint,' J. Adhesion, Vol. 44, 1994, pp. 271-284 https://doi.org/10.1080/00218469408027083
  8. Lee, S.J., and Lee, D.G., 'An Iterative Solution for the Torque Transmission Capability of Adhesively Bonded Tubular Single Lap Joints with Nonlinear Shear Properties,' J. Adhesion, Vol. 53, 1995, pp. 217-227 https://doi.org/10.1080/00218469508009940
  9. Lee, D.G., and Oh, J.H., 'Nonlinear Analysis of the Torque Transmission Capability of Adhesively Bonded Tubular Lap Joints,' J. Adhesion, Vol. 71, 1999, pp. 81-106 https://doi.org/10.1080/00218469908009567
  10. Thomsen, O.T., and Kildegaard, A., 'Analysis of Adhesive Bonded Generally Orthotropic Circular Shells,' Proceedings of the Fourth European Conference of Composite Materials, Stuttgart, Germany, 1990, pp. 723-729
  11. Chon, C.T., 'Analysis of Tubular Lap Joint in Torsion,' J. Composite Materials, Vol. 16, 1982, pp. 268-284 https://doi.org/10.1177/002199838201600402
  12. EI-hady, F.A., and Kandil, N., 'Optimization of Tubular Double Lap Joint Configuration,' Polymer Composites, Vol. 23, 2002, pp. 934-941 https://doi.org/10.1002/pc.10490
  13. Herakovich, C.T., Mechanics of Fibrous Composites, New York: John Wiley & Sons, Inc., 1998