DOI QR코드

DOI QR Code

고강도 강섬유보강 콘크리트의 역학적 특성 및 장기변형 특성에 관한 실험적 연구

An Experimental Study on the Mechanical Properties and Long-Term Deformations of High-Strength Steel Fiber Reinforced Concrete

  • 윤의식 (한국원자력안전기술원 구조부지실) ;
  • 박승범 (충남대학교 토목공학과)
  • 투고 : 2005.10.06
  • 심사 : 2006.01.09
  • 발행 : 2006.03.30

초록

본 연구에서는 고강도 강섬유보강 콘크리트(HSFRC)의 설계 및 시공을 위한 기초 자료를 제공하기 위하여 역학적 특성 및 장기변형 특성에 관한 연구를 수행하였으며, 탄성계수, 압축강도, 인장강도, 휨강도, 건조수축 및 크리프에 미치는 강섬유 혼입의 영향을 검토하고, 휨파괴인성을 평가하였다. 연구결과, HSFRC의 압축강도에 미치는 강섬유의 혼입효과는 그다지 크지 않았고, 탄성계수는 섬유혼입률이 증가함에 따라 증가하는 것으로 나타났으며, 인장강도, 휨강도 및 휨인성에 미치는 섬유혼입률($V_f$) 및 섬유형상비($l_f/d_f$)의 영향은 대단히 큰 것으로 나타났다. 이는 $V_f$$l_f/d_f$의 증가와 함께 극한하중에 상응하는 처짐량이 증가하고, 강섬유의 균열구속성능에 의해 하중-처짐곡선의 하강곡선이 완만하게 감소하기 때문인 것으로 판단된다. 또한 크리프 및 건조수축에 미치는 섬유혼입률($V_f$)의 영향은 대단히 큰 것으로 나타났으며, 특히 고강도 콘크리트에 강섬유를 혼입하면 크리프 변형에 비해 건조수축 변형의 저감에 더욱 효과가 큰 것으로 나타났다.

This study presents basic information on the mechanical properties and long-term deformations of high-strength steel fiber reinforced concrete(HSFRC). The Influence of steel fiber on modulus of elasticity, compressive, splitting tensile and flexural strength, and drying shrinkage and creep of HSFRC are investigated, and flexural fracture toughness is evaluated. Test results show that Test results show that the effect of steel fibers on the compressive strength is negligible, and the modulus of elasticity of HSFRC increased with the increase of fiber volume fraction. And the effect of fiber volume fraction($V_f$) and aspect ratio($l_f/d_f$) on tensile strength, flexural strength and toughness is extremely prominent. It is observed that the flexural deflection corresponded to ultimate load increased with the increase of $V_f$ and $l_f/d_f$, and due to fiber arresting cracking, the shape of the descending branch of load-deflection tends towards gently. Also, the effect of addition of various amounts of fiber on the creep and shrinkage is obvious. Especially, the effect of adding fibers to high-strength concrete is more pronounced in reducing the drying shrinkage than the creep.

키워드

참고문헌

  1. 장동일, 손영현, 채원규(2000) 강섬유보강 고강도 콘크리트의 응력-변형률 곡선 및 탄성계수 추정식 평가, 한국콘크리트학회지, 한국콘크리트학회, 제12권 제2호, pp. 13-20
  2. 한국콘크리트학회(2003) 콘크리트표준시방서
  3. 朴成武, 伊藤利治(2000) 超高強度繊維補強コンクリートに関する基礎的研究, コンクリー卜工學年次論文集, Vol. 22, No.2, pp. 331-336
  4. 阿部孝仁, 金子佳生, 三橋博三(2001 ) 短鋼織雄混人によるセメント 系複合材料の高強度高靭性化とその基礎的特性, コンクリート工學年次論文集, Vol. 23, No.2, pp. 205-210
  5. ACI 363 Committee (1992) State-of-the-Art Report on the High-Strength Concrete(ACI 363R-92)
  6. ACI 544 Committee (1988) Design Considerations for Strrl Fiber Reinforced Concrete (ACI 544.4 R-88; Reapproved 1994)
  7. Ashour, S.A., Mahmood, K. and Wafa, F.F. (1997) Influence of Steel Fibers and Compression Reinforcement on Deflection of High-Strength Concrete Beams, ACI Structural Journal, pp. 611-624
  8. Chunxiang, Q., Indubhushan, P. (1999) Properties of High-Strength Steel Fiber-Reinforced Concrete Beams in Bending, Journal of Cement and Concrete Research, Vol. 21, pp. 73-81 https://doi.org/10.1016/S0958-9465(98)00040-7
  9. Daniel, J.A., Shah, S.P. (1994) Fiber Reinforced Concrete Developments and Innovations(ACI SP -142)
  10. Hsu, L.S. and Hsu, T. (1993) Stress Strain Behavior of Steel-Fiber High-Strength Concrete under Compresson, ACI Structural Journal, Vol. 91, No.4, pp. 448-457
  11. Jianming G., Wei, S., and Keiji, M. (1997) Mechanical Properties of Steel Fiber-Reinforced, High -Strength, Lightweight Concrete, Journal of Cement and Concrete Research. Vol. 19, pp. 307-313 https://doi.org/10.1016/S0958-9465(97)00023-1
  12. Koo, B.K., Jung, K.S., and Kim, T.B. (1992) The Effects of Reinforcing of Steel Fiber on the Strength Properties of High-Strength Concrete, Journal of KCI, Vol. 4, No.2, pp. 93-101
  13. Park, S.B., and et. al. (1997) An Exprimental Study on the Durability and Drying Shrinkage of Steel Fiber Reinforced Concrete, Proceeding of KCI, Vol. 7, No.2, pp. 80-83
  14. Park, S.B., Yoon, E.S. (1990) An Experimental Study on the Development and Application of High-Strength Composites utilizing Waste Products, Journal of KSCM, Vol. 3, No. 1, pp. 23-35
  15. Ryu, G.S., Park, J.J., and et. al. (2005) A Study on the Flexural Behavior of Ultra-Strength Steel Fiber Reinforced Concrete, Proceeding of KCI, Vol. 17, No. 1, pp. 334-336
  16. Seo, J.M., Lee, J.H., and Yoon, Y.S. (2005) An Experimental Study on the Relationship between SFRC and HSC at Long-term Response, Proceeding of KCI, Vol. 17, No. 1, pp. 317-320
  17. Shiiba, H., Honda, S., and Araki, A. (1992) Effect of Various Factors on the Strength of High-Strength Lightweight Concrete, Proceeding of JCI, Vol. 14, No.1, pp. 291-306
  18. Wafa, F.F. and Ashour, A.A. (1992) Mechanical Properties of High-Strength Fiber Reinforced Concrete, ACI Material Journal, Vol. 89, No.5, pp. 449-455
  19. Wafa, F.F. and Ashour, A.A. (1993) Flexural Behavior of High-Strength Fiber Reinforced Concrete Beams, ACI Structural Journal, Vol. 90, No.3, pp. 279-287
  20. Young, C.H. and Chem, J.C. (1990) Study of Factors Influencing Drying Shrinkage of Steel Fiber Reinforced Concrete, ACI Structural Journal. pp. 123-129
  21. Zhang, M.H., Gjorv. O.E. (1991) Mechanical Properties of High-Strength Lightweight Concrete, ACI Material Journal, Vol. 88, NO.3, pp. 240-247