References
- Boreisho, A. S., Khailov, V. M., Malkov, V., M., and Savin, A. V., "Pressure recovery system for high power gas flow chemical laser," XIII International symposium on gas flow & Chemical lasers - High power laser conference, edited by SPIE, Florence, Italy, 2000, pp.401-405
- Malkov, V. M., Boreisho, A. S., Savin, A. V., Kiselev, I. A., and Orlov, A. E., "Choice of working parameters of pressure recovery systems for high-power gas flow chemical lasers," XIII International symposium on gas flow & Chemical lasers - High power laser conference, edited by SPIE, Florence, Italy, 2000, pp.419-422
- Kim, S., Jin, J., Kwon, H., and Kwon, S., "Development of a rational design procedure of pressure recovery system for HPCL," XV International symposium on gas flow & Chemical lasers - High power laser conference, edited by SPIE, Prague, Czech Republic, 2004, pp.149-154
- Fabri, J., and Siestrunck, R., "Supersonic air ejectors," Advances in Applied Mechanics (eds Von Meiss and Von Karman), Academic Press, New York, USA, 1958, V., pp.1-34
- 김세훈, 권세진, "패브리 초킹을 이용한 환형분사 초음속 이젝터의 부유동 압력 예측," 한국추진공학회지, 제9권 제1호, 2005, pp.61-66
- 김세훈, 진정근, 권세진, "이차목을 갖는 환형 분사 초음속 이젝터 이론 해석," 대한기계학회 논문집 B, 제29권, 제10호, 2005, pp.1285-1290
- Hodge, B. K., and Koenig, K., Compressible Fluid Dynamics, Prentice Hall International Editions, 1995
- Anderson, J., Modern compressible flow, 3rd edition, McGraw Hill, 2003
- Mikkelsen, C. D., Sandberg, M. R., and Addy, A. L., "Theoretical and experimental analysis of the constant-area, supersonic -supersonic ejector," U. S. Army Research Office, Grant number DAHC 04-75-G-0046, and Dep. of Mechanical & Industrial Eng., Uni. of Illinois at Urbana-Champaign, Urbana, Illinois 61801
- 최보규, "이젝터의 유동특성에 관한 연구," 공학박사 학위논문, 부산대학교 일반대학원 기계설계공학과, 2001년 2월
- Emanuel, G., "Optimum performance for a single-stage gaseous ejector," AIAA J., Vol. 14, No. 9, 1976, pp.1292-1296 https://doi.org/10.2514/3.61462
- Hedges, K. R., and Hill, P. G., "Compressible flow ejectors. Part II: Flow measurements and analysis," J. of Fluids Eng., Trans. ASME, Vo. 96, 1974, pp.282-288 https://doi.org/10.1115/1.3447153