DOI QR코드

DOI QR Code

Improvement of the Advanced Treatment for Nitrogen Removal of Acrylic Fiber Wastewater

아크릴섬유 폐수의 생물학적 질소제거공정의 개선

  • Lee, Chan-Won (Department of Environmental Engineering, Kyungnam University) ;
  • Cho, In-Sung (Department of Environmental Engineering, Kyungnam University) ;
  • Lim, Kyeong-Won (Department of Environmental Engineering, Kyungnam University)
  • Published : 2006.05.01

Abstract

The effluent discharge standards of industrial wastewater has become more stringent since 2003. Many industrial wastewater treatment plants has been upgraded to advanced treatment facilities. There are high concentrations of nitrate(>200 mg/L) and ammonium(>50 mg/L) nitrogen in the acrylic fiber wastewater of H textile Co. Wastewater from acrylic fiber industry containing acrylonitrile, which may affect the subsequent biological treatment process. Manufacturing of acrylic fiber also produces shock loadings. Excessive acrylonitrile and polymer debris produced in the polymerization process was screened, coagulated with CaO and settled down. A preaeration system was added to treat this high pH effluent to remove volatile organic compound and ammonia nitrogen by the air stripping effect. it was found that nitrification rate was not sufficient in the Anoxic/Oxic(AO) process. One denitrification tank was converted to nitrification reactor to extend HRT of nitrification. Nitrification rate of ammonia nitrogen was promoted from 32% to 67% by this modification and effluent nitrogen concentration was well satisfied with the effluent standards since then.

Keywords

References

  1. 엄태규, 한동엽, 구인수, 2002, 순환형 A/O시스템을 이용한 질소제거에 관한연구, 상하수도학회지, 16(5), 569-574
  2. 최명섭, 손인식, 2003, RBC 반응조를 이용한 2 단 A/O 공법에서 유기물질 및 질소제거, 한국환경위생학회지, 29(3), 59-64
  3. 서종환, 이철승, 2005, Jet Loop 반응기를 이용한 화학비료폐수의 생물학적 질소제거 연구, 한국환경과학회지, 14(2), 157-165 https://doi.org/10.5322/JES.2005.14.2.157
  4. 최명섭, 손인식, 2003, 무산소-RBC 공정을 이용한 질소제거 특성 및 동력학적 인자 도출, 한국환경과학회지, 12(10), 1085-1093
  5. 정경훈, 최형일, 정오진, 2003, 고정화 활성슬러지에 의한 폐수중의 질소제거 가능성 평가, 한국물환경학회지, 19(1), 17-24
  6. 이재근, 김영균, 이광호, 2003, SBR 공정에서 혐기시간 및 HRT 변화에 따른 탈질율이 질소 제거에 미치는 영향, 대한환경공학회지, 춘계학술 발표회 논문집, 151-155
  7. 김용태, 고수정, 김영오, 이태호, 박태주, 2004, CSTR내 생물고정화 기술을 이용한 폐수의 고농도 암모니아성 질소제거, 한국물환경학회.대한상수도학회 공동춘계학술발표대회 논문집, 307-310
  8. 김정숙, 김시준, 2003, 미생물고정화법에 의한 활성슬러지공법의 처리성능 개선, 대한환경공학회지 , 25(10), 1233-1237
  9. 김광수, 이상은, 안정희, 2003, 생물학적 질소 제거를 위한 내부 내부반송비, 대한환경공학회지, 25(2), 212-216
  10. 김승진, 배우근, 박성준, 이용우, 2003, SBR을 이용한 단축질소제거 공정에서 DO와 SRT에 의한 조기 안정화, 대한상수도학회.한국물환경학회 공동추계학술발표대회 논문집 , c13-c16
  11. Ciudad, G., O. Rubilar, P. Munoz, G. Ruiz, R. Chamy, C. Vergara and D. Jeison, 2005, Partial nitrification fo high ammonia concentration wastewater as a part of a shortcut biological nitrogen removal process, Process Biochemical, 40, 1715-1719 https://doi.org/10.1016/j.procbio.2004.06.058
  12. Ruiz, G., D. Jesion, O. Rubilar, G. Ciudad and R. Chamy, 2005, Nitrification-denitrification via nitrite accumulation for nitrogen removal from wastewaters, Bioresource Technolology, 97, 330-335
  13. 부산대학교 환경기술산업개발연구센터, 1996, 하.폐수의 질소.인 제거 신기술, 65, pp.37-38
  14. 환경부, 2002, 질소.인 폐수 배출업소 순회교육, pp.3-5
  15. 환경부, 2004, 환경통계연감 2004, 17, pp.470-475
  16. 환경부, 환경보전협회, 2004, 수질관리 전문관리자과정, pp.280-287