References
- Bhushan, B. and Gupta, B. K., 'Handbook of Tribology,' McGraw-Hill, New York, 1991
- Oh, S. M., Kim, J. K. and Rhee, B. G., 'Tribological Characteristics of Carbon Fiber Reinforced Plastics Prepared by Ion-Assisted Reaction,' J. of the Korean Society of Precision Eng., Vol. 21, No.4, pp. 103-108, 2004
- Podgomik, B., Vizintin, J. and Leskovsek, V., 'Wear properties of induction hardened, conventional plasma nitrided and pulse plasma nitrided AISI 4140 steel in dry sliding conditions,' Wear, Vol. 232, No.2, pp. 231-242, 1998 https://doi.org/10.1016/S0043-1648(99)00151-9
- Kessler, O., Herding, T., Hoffmann, F. and Mayr, P., 'Microstructure and wear resistance of CVD TiNcoated and induction surface hardened steels,' Surface & coatings technology, Vol. 182, No. 2/3, pp. 184-191, 2004 https://doi.org/10.1016/j.surfcoat.2003.08.054
- Na, B. C. and Tanaka, A., 'Tribology Characteristics of DLC film Based on Hardness of Mating Materials,' Thin Solid Films, Vol. 478, No. 1, pp. 176-182, 2005 https://doi.org/10.1016/j.tsf.2004.10.040
- Ager, J. W. III, Anders, S., Brown, I. G., Nastasi, M. and Walter, K. C., 'Multilayer hard carbon films with low wear rate,' Surface & coating technology, Vol. 91, No. 1-2, pp. 91-94, 1997 https://doi.org/10.1016/S0257-8972(97)80004-7
- Izciler, M. and Tabur, M., 'Abrasive wear behavior of different case depth gas carburized AISI 8620 gear steel,' Wear: An international journal on the science and technology of friction, lubrication and wear. Vol. 260, No. 1, pp. 90-98, 2006 https://doi.org/10.1016/j.wear.2004.12.034
- Juliet, P., Gras, R. and Pauleau, Y, 'Friction coefficient and wear rate of sputter-deposited thin films and plasma-sprayed thick coatings at high temperature in room,' Wear: An international journal on the science and technology of friction, lubrication and wear, Vol. 210, No. 1, pp. 326-332, 1997 https://doi.org/10.1016/S0043-1648(97)00065-3
- Totik, Y, Sadeler, R., Altun, H. and Gavgali, M.. 'The effects of induction hardening on wear properties of AISI 4140 steel in dry sliding conditions,' Materials & Design, Vol. 24, No. 1, pp. 25-30, 2003 https://doi.org/10.1016/S0261-3069(02)00099-7